Wildix Switches - Quick Start Guide
- Elena Kornilova
- Tatiana Bieliakova
- Ksenia Babych
The line of Wildix network switches WSGxxPOE is going EOL after the current stock is over.
You can view the availability of items remaining in stock in Salesforce Partner Community
A quick guide to connection, installation and troubleshooting of WSG05POE-WSG08POE-WSG16POE-WSG24POE.
Switches Documentation pre 2019: https://drive.google.com/drive/folders/1s93QnJJ_mncZb1iP4QjQ_Q8dW9zWpnti.
Updated: November 2020
Permalink: https://wildix.atlassian.net/wiki/x/4w7OAQ
Package contents
- 1 x Switch
- 1 x Power cord (WSG08/16/24POE)
- Rubber feet, mounting ears and screws for rack installation (WSG08/16/24POE)
Installation
- All models can be installed on a flat surface; WSG08/16/24POE are rack-mountable; WSG05POE 2019 is wall-mountable
- Install in a cool and dry place (see the Datasheet for acceptable tº and humidity ranges)
- Leave the space around the switch for ventilation
- Install the switch on a surface that can support its weight
- Do not place heavy objects on the switch
- The power cord length is less than 150cm
Turn on the switch
- Before powering on the switch, make sure the voltage is correct. The power supply socket is situated on the back panel of the switch
- Plug the power supply into the switch: the power indicator on the front panel must turn on
LED indicators and ports description
WSG05POE 2019
- 5 x 10/100/1000Mbps Auto-negotiation Ethernet RJ45 ports (1 PoE IN port and 4 PoE OUT ports)
| LED | Status | Description |
PWR | ON | Power is supplied |
OFF | No power | |
Link/Act | ON | A valid link is established |
Blinking | Data packets received or transmitted | |
OFF | No link is established | |
PSE | ON | There is a PoE PD (Powered Device) connected to the port, which supply power successfully |
OFF | No PD port connect to the port | |
Blinking | The power is not enough to supply PoE device to work on. | |
MAX | ON | When the power output to PDs has reached or exceeded the maximum power budget. No additional PDs connected will be powered |
OFF | When the system is using less than 55W | |
Blinking | The power is not enough to supply PoE device to work on |
WSG08POE
- 8 x 10/100/1000Mbps Auto-negotiation Ethernet RJ45 ports with 8 PoE function ports
LED | Color | Status | Description |
PWR | Green | ON | Power is supplied |
OFF | No power | ||
Link | Orange (10/100Mbps) Green (1000Mbps) | ON | A valid link is established |
Blinking | Data packets are received or transmitted | ||
OFF | No link is established | ||
PoE | Orange | ON | A PoE PD (Powered Device) is connected to the port |
OFF | No PD is connected to the port | ||
MAX 1 (1-4 Ports) | Yellow | ON | The power output has reached the max power budget (⋝55W) |
Blinking | The power output has exceeded the max power budget (⋝70W) | ||
OFF | The power of all the connected PoE ports is less than 55W | ||
MAX 2 (5-8 Ports) | Yellow | ON | The power output has reached the max power budget (⋝55W) |
Blinking | The power output to PDs has exceeded the max power budget (⋝70W) | ||
OFF | The system is using less than 55W |
WSG16POE
- 16 x 10/100/1000Mbps Auto-negotiation Ethernet RJ45 ports with 16 PoE function ports
LED | Color | Status | Description |
Power | Red | ON | Power is supplied |
OFF | No power | ||
Link / Act / Speed | Orange (10/100Mbps) Green (1000Mbps) | ON | A valid link is established |
Blinking | Data packets are received or transmitted | ||
OFF | No link is established | ||
PoE | Yellow | ON | A PoE PD (Powered Device) is connected to the port |
OFF | No PD is connected to the port |
WSG24POE
- 10/100/1000Mbps RJ45 ports (1-24): connect devices with 10 / 100 / 1000Mbps bandwidth
- SFP ports (SFP1, SFP2): install SFP module and connect devices with 1000Mbps bandwidth
- Console port (Console): connect a serial port of PC / terminal for monitoring and configuring the Switch
- Reset button (Reset): (device is connected to power supply) press and hold the button for about 5 sec
See WSG24POE – Administrator Manual for more info on configuration of the web managed switch.
LED | Color | Status | Description |
PWR | Green | ON |