Wizyconf Videoconference - User Guide

Wizyconf is the first professional easy-to-use video conference.

Min supported version: WMS 5

Created: June 2020

Updated: June 2024

Permalink: https://wildix.atlassian.net/wiki/x/_ALOAQ

Screen sharing issue on macOS using Google Chrome

Due to detected issues in Google Chrome, it might be impossible to use screen sharing.

To resolve the issue, take the following steps:

  1. Update Chrome to the latest version
  2. Refresh permissions: go to macOS System Preferences -> Security & Privacy -> Screen Recording -> uncheck and check Google Chrome checkbox

Temporal limitation for macOS users:

for the Wizyconf to work on Safari web browser, please follow the steps below:

  1. Open Safari web browser -> Preferences -> Privacy tab
  2. Make sure the option Website tracking: Prevent cross-site tracking is unchecked

This limitation concerns only PBX users. External participants using Safari web browser are not affected.


Requirements

Browser

  • Google Chrome

  • Chromium

  • Safari 12.1.X and higher

  • Microsoft Edge 79.0.309 and higher

  • Firefox

For Screen Sharing

  • Chrome v. 72
  • Firefox v. 66+

Wildix licenses:

Ports to open on firewall

Check here: Ports used by Wildix services.

Bandwidth requirements

The bandwidth used by Wildix Videoconference is adaptive and varies to provide the best experience on participants’ network. 

Minimum bandwidth required:

  • Outbound from the participant: 300 kbps

  • Inbound to the participant: 300 kbps

Ideal bandwidth:

  • Two-person video calls:

    • Outbound from the participant: 2.6 mbps

    • Inbound to the participant: 2.6 mbps

  • Group video calls:

    • Outbound from the participant in all situations: 2.6 mbps

    • Inbound to the participant with 5 participants: 3.2 mbps

    • Inbound to the participant with 10 participants: 4.0 mbps

It is possible to decrease bandwidth consumption by selecting a lower video quality level in options, see the chapter Video quality.

Number of participants in a conference

  • Video: Currently the number of users who can share their videos is not limited – it's possible to see all the users who are sharing their videos in Tiles view, however for the optimal performance we do not recommend to exceed 70 users in case all of them share their videos 


You can also consider live streaming option--in this way you can create a conference only with those users who need to speak and stream their video, while others can watch and comment. 

Wizyconf additional equipment

To ensure efficient collaboration during videoconferencing in small and large meeting rooms, Wildix offers some additional equipment:

Wizyconf Conference Room - the first professional easy-to-use web conference – a fully equipped conference room: Wizyconf Conference Room - Documentation

Create a conference room

To be able to create a conference room, you need to be Wildix PBX user with a UC-Business or UC-Premium licence assigned. 

Conference rooms can be created only from Collaboration interface.

To create a new conference room:

  1. Access Wildix Collaboration
  2. Click on the blue Video Conference icon (Screen icon) in the top menu:


  3. Video Conference dialog opens, click + New conference in the lower right-hand side of the screen:


  4. Fill out the following fields:

    • 1 - Title: enter conference title 
    • 2 - Invite participants (optional): start typing a name into the search field to invite a user / a contact or enter the email address to invite any external user via email 

    • 3 - Description (optional): add a description of your event (if filled out, the description field will be present in the email invitation sent to participants)
    • 4 - Conference scheduling (optional): tick off the Calendar icon, then select the date and the time of your conference, timezone and set up recurring video conferences (see the chapter Schedule a conference)

    • 5 - Language (optional): change the language of an invitation email and separately select dial-in numbers (you can select 2 countries)

    • 6 - Set conference password (optional, available starting from WMS v. 5.02.20201023.2): protect a conference with a password, 2 passwords are generated automatically: 1 - for a web conference (can be changed), 2 - for dial-in numbers and Wizyconf Station (cannot be changed). For a web conference access, a password length is from 6 to 10 symbols, including numbers, upper and lower case letters; for dial-in and Wizyconf Station access, password consists of 6 numbers

      (After you have filled in the fields): Click Tick icon to save the room

  5. The conference is added to the list and you can find it by its title: 

Now you can click on the conference to join it. 

Conference room is deleted automatically after 30 days of inactivity.

Schedule a conference 

It is possible to schedule the conference or set it up as a recurring event the moment when you create a new conference room, or any time by editing an existing conference room:

  1. Open the conference dialog from Collaboration
  2. Tick off the Calendar icon (Schedule) in the bottom of the dialog
  3. Select the date and the time of your conference, select the timezone
  4. (If you wish to set up a recurrent event): click Does not repeat and set up the recurrence:  


     

  5. Click Tick icon in the lower right-hand side of the Video Conference dialog to save changes

Scheduled/ recurrent event is automatically added to your calendar with the link to the conference.

Access a conference room

It is possible to access a conference room via web (via a link), or in audio-only mode (by calling the provided phone number). If a conference is protected with a passworda participant is required to enter it before joining the room.

Access from email invitation

All invited users receive an invitation via email:

  • 1 - Scheduled event is automatically added to your calendar 

    Note: According to the new Google settings, you need to turn on specific options in order to guarantee that scheduled events are automatically added to you calendar.

    Follow these instructions:

    1. Go to Gmail Settings -> See all settings

    2. Go to General tab and scroll to Smart features and personalization

    3. Turn on Smart features and personalization if you use Gmail email client or Smart features and personalization in other Google products if you use other mail clients, (Outlook, Apple Mail etc) under Gmail account

    More information is available here: https://support.google.com/mail/answer/10079371?hl=en&ref_topic=3394219.

  • 2 - You can access the conference via the link provided in the email 

  • 3 - You can also access the conference in the audio-only mode, by using dial-in numbers. This is the option for mobile phones, which allows you to join the conference without manually entering the conference ID (as it is already included in the click-to-call dial-in number) 
  • 4 - This option is not restricted to mobile phones. It also lets you access the conference in the audio-only mode by calling the local number for your country. Click Find a local number to view the full list
  • 5 - This is the ID number of the conference

  • 6 - Use conference passwords to access the conference: conference password is designed for web conference, conference PIN - for dial-in numbers and Wizyconf Station

Access for external users

When an external user clicks on the provided link, they need to enter their name and (optionally) their email or sign in via social networks:


Conference room is locked for external users unless there is at least one PBX user inside. 

A conference room can be unlocked by any PBX user:

  • by joining via the web
  • by joining in audio-only mode 

Access from Collaboration

Video Conference dialog

PBX users can access any conference created previously by them and the ones to which they were invited, from the Video Conference dialog:

  1. Click on the blue Video Conference icon in the top menu:


  2. Find the conference by its title and click on it to join: 


  3. If the conference is protected with a password, you need to enter a conference password (check the password in an invitation or ask a conference moderator for it) and click Join


Conferences are sorted in the following order in Collaboration:

  1. conferences created in the last hour (unscheduled)
  2. scheduled conferences (starting from the ones scheduled for the nearest future)
  3. unscheduled conferences
  4. conferences scheduled in the past

Chat invitation

A PBX user invited to a conference receives an invitation via chat and can access it by clicking on the link (or by calling the indicated phone number from their Wildix device to access in audio-only mode):

A PBX user can access a conference room by clicking on the link received via chat, from:

  • Collaboration
  • Vision/ SuperVision desk phones
  • iOS/ Android app 

Access from smartphone

You cannot create a conference room from smartphone app, but you can access conference rooms to which you were invited.

More details on how to join a video conference from Wildix Collaboration smart phone apps can be found in:

PBX user

When a PBX user is invited to a conference, they receive an invitation via email/ chat with a link to join the conference via web and a phone number, allowing them to join the conference in audio-only mode from their Wildix device. 

External user

All invited users receive an invitation via email with a link to join the conference via web and a local phone number that they can dial to join the conference in audio-only mode. 

Access from Vision/ SuperVision phones

You cannot create a conference room from Vision/ SuperVision phones, but you can access conference rooms to which you were invited.

More details on how to join a video conference from Vision/ SuperVision can be found in:

Access from Wizyconf Conference Room (Wizyconf station)

You cannot create a conference room from Wizyconf Conference Room, but you can access conference rooms to which the Wizyconf user was invited.

More information in Wizyconf Station Quick Start Guide.

Access in audio-only mode

PBX users can access the conference in the audio-only mode by calling the number 98XXXXXXX, where 98 is the Feature code Conference (by default) and XXXXXXX is the conference ID number (Conference ID is provided in the email invitation). 

Note: you can set an alternative code/ prefix instead of Feature code "Conference" 98. After it is changed, it is also displayed in email / chat invitations.

External users can access the conference in the audio-only mode by calling the local phone number provided in the email invitation: use the option Dial-in number or Dial-in number (for mobile users only).

To access the conference:

  • Call the provided phone number

  • External users are requested to enter the conference ID number and say their name (Conference ID number is provided in the invitation email), after which they access the conference (other participants present in the conference are notified when audio-only users are connected and disconnected).

    Note: Mobile phone users can choose the option Dial-in number (for mobile users only) and join the conference without entering the conference ID.

Current limitation: no visual indication for muted users who access a conference in audio-only mode.

Tutorials and updates 

The basics tutorial

The basics tutorial is a great way for new users to explore Wizyconf functionality in a convenient and interactive way. When reaching the tutorial for the first time, a yellow dot appears next to More options in the bottom menu and you can see Tutorials and updates, highlighted in yellow.

  1. Click on the More options (1) button (three dots) and proceed to Tutorials and updates (2):


  2. Next to The basics tutorial, press Play tutorial:


  3. The tutorial opens up and guides you through the main features of Wizyconf. Click Next to proceed to another feature or back arrow to return to the previous one:



If you close the tutorial, you can continue from the moment you stopped. Go to More options -> Tutorials and updates -> click Continue watching:

New features

When there are new features available, a yellow dot appears next to More options (1) and the Tutorials and updates (2) in the More options list is highlighted in yellow:

Note: The yellow dot remains until you click Tutorials and updates and view the new features. 


When you click on Tutorials and updates the following pop-up screen appears, which includes The basics tutorial and the list of latest features: 



When you click Show, a pop-up screen appears demonstrating how the new feature works:

Click Next feature to move further orto close the pop-up screen.

Conference controls 

Users start with mic/ cam off

This option is reserved for the conference moderator only.


By default all users access the conference with their microphones enabled and cameras disabled.

Note: In case you change mic or camera settings, they are preserved upon the next time you enter a conference room.

Example: If you enable the camera in the current conference, it remains enabled in all future meetings you participate in.

The option to decide whether users should access the conference with their webcams enabled/ microphones disabled is reserved to the conference moderator:

  1. Click three dots next to the Leave the meeting button at the bottom of the screen
  2. Click Settings
  3. Click on Moderator tab; here are the options available only for the Moderator:

    • Everyone starts with mic off (cam on): users join the conference with their webcams enabled and microphones disabled
    • Everyone starts with cam off (mic on): users join the conference with their microphones enabled and webcams disabled
    • Everyone follows me: users see on the screen what the moderator shows (tiles view/ sidebar view with selected user)
    • Mute reaction sounds for everyone: users do not hear reaction sounds inside the conference
  4. Tick off the the options and click on OK to apply