HTTP Proxy Client - Supported Services
This document provides the list of supported services in case of using HTTP Proxy Server.
Created: August 2024
Updated: October 2024
Permalink: https://wildix.atlassian.net/wiki/x/IYAQKw
Introduction
HTTP Proxy client can be used in cases when you want to disable external access to PBX and use Proxy Server. For correct work of PBX via Proxy Server without direct access to the Internet, there should be access to an available DNS server.
Services
HTTP Proxy Client allows to use HTTP Proxy Server for the following services:
Activate/update license
Upgrade PBX
Remote support
Upgrade devices firmware
Note:
- Starting from WMS 6.07.20240906.1, HTTP Proxy on Hardware and Virtual PBXs can get firmwares from CDN to upgrade the following Wildix devices: DaySaver, W01GSM, FXO r3/4, FXS r3/4, WP r2/ r3/ r4 phones, W-PA
- The support for W-AIR devices firmware ugrade starts from WMS 6.08.20241024.1.
Current limitation:
- The following devices are not included: WP 5 phones. Their support should be added in further releases.
Get SSL certificate
Renew SSL certificate (starting from WMS 6.07.20240816.4)
Get CDS statistics
Get/ create/ remove data from CDS
Notification service
MFA service
Conference service
Veesion alert notifications
- TTS/ STT (starting from WMS 6.07.20240827.1)
Important: When there is no direct access to Internet on the PBX and HTTP Proxy Server is used, some external services cannot work, for example:
screen sharing
external lookup
devices sync from WMP
Videoconference MCU