Info |
---|
Update repository: rel50beta In case of automatic upgrade, make sure to specify the current repository. Link for sharing: https://confluence.wildix.com/x/foAJB |
Note |
---|
Requirements:
|
Note |
---|
API admin user authentication: It is recommended to use PHP HTTP client library for S2S authentication: https://github.com/Wildix/s2s-client-php API documentation: https://<pbx_host>/api/v1/doc/#section/Authentication |
...
Starting from WMS 5.03, Directory sync protocol is routed outside of WMS network.
...
Warning |
---|
Important: WMS 5 reaches end of life on December 31, 2023. Make sure to upgrade PBXs to WMS 6: use rel60 repository. |
Info |
---|
Update repository: rel50beta In case of automatic upgrade, make sure to specify the current repository. Link for sharing: https://wildix.atlassian.net/wiki/x/aCDOAQ |
Note |
---|
Requirements:
|
Note |
---|
API admin user authentication: It is recommended to use PHP HTTP client library for S2S authentication: https://github.com/Wildix/s2s-client-php API documentation: https://<pbx_host>/api/v1/doc/#section/Authentication |
Warning |
---|
Starting from WMS 5.03, Directory sync protocol is routed outside of WMS network. For correct behaviour of WMS Network, first update Server PBX and then Client PBXs. |
WMS Beta 5.04.20231017.1 Date: 14.02.2024
Additional packages: original debian packages
WMS Beta 5.04.20231017.1 Date: 16.11.2023
Additional packages: original debian packages
WMS Beta 5.04.20231017.1 Date: 17.10.2023
Additional packages: original debian packages, wildix-cw-5.04.20231017.1
Fix
[WMS-18211] - sys: fixed an issue of PBX engine crash in some rare cases
WMS Beta 5.04.20230808.1 Date: 14.08.2023
Improvement
[WMS-17508] - sys: made some security improvements
WMS Beta 5.04.20230630.1 Date: 27.07.2023
Additional packages: original debian packages, wildix-base, wildix-wair-firmwares
Improvement
[WMS-17581] - dev: improved W-AIR provisioning logic so that old W-AIR bases (Small Business, W-AIR Networks, Hybrid W-AIR Networks) get the 670b1 firmware, to avoid an issue of poor audio quality on W-AIR Basic2 handsets
WMS Beta 5.04.20230630.1 Date: 17.07.2023
Fix
[WMS-17465] - sys: fixed an issue in which migrate2cloud script used during the data migration process from Hardware/ Virtual PBX to Cloud PBX failed because of incorrect calculation of disk space usage
WMS Beta 5.04.20230607.1 Date: 26.06.2023
Additional packages: original debian packages, wildix-lua, wildix-dialplan, wildix-provision
Fix
[WMS-17022] - sys: updated the voice prompt pronounced when user tried to access another user’s voicemail, removing the request to enter pound after the password, as the pound made it impossible to access the voicemail
WMS Beta 5.04.20230607.1 Date: 08.06.2023
Additional packages: original debian packages
Improvement
[WMS-16580] - wms: performance and stability improvements
WMS Beta 5.04.20230512.1 Date: 02.06.2023
Additional Wildix packages: wildix-base_5.04.20230601.1
Fix
[WMS-17124] - wms: fixed a rare issue when Hardware PBX could not be upgraded from WMS 5 to WMS 6 because of lack of space
WMS Beta 5.04.20230512.1 Date: 17.05.2023
Additional Wildix packages: sipproxy 5.5.3-5.04.20230516.1 wildix-dialplan 5.04.20230515.1 wildix-lua-base 5.04.20230515.1 wildix-provision 5.04.20230515.1
Improvement
[WMS-17141] - sys: improved SIP Proxy performance to avoid memory issues
Fixes
[WMS-17075] - sys: fixed an issue when speech recognition didn’t work correctly after the question was repeated
WMS Beta 5.04.20230512.1 Date: 15.05.2023
Fixes
[WMS-16944] - wms: fixed an issue in which it wasn’t possible to upgrade Hardware PBX from WMS 5 to WMS 6 because of lack of space
[WMS-17010] - sys: fixed data migration issues from Hardware/ Virtual PBX to Cloud PBX, caused by ‘migrate2cloud’ script, which incorrectly calculated disk space usage
WMS Beta 5.04.20230504.1 Date: 05.05.2023
Improvement
[WMS-16830] - wms: performance and stability improvements
WMS Beta 5.04.20230421.1 Date: 25.04.2023
New Firmware
New Firmware: WP410r2 v. 50.145.6.176
[WP-261] - wp: fixed an issue in which WP410 r2 phone stuck in a continuous loop of receiving configuration from a PBX
WMS Beta 5.04.20230421.1 Date: 21.04.2023
Additional packages: wildix-cw-5.04.20230407.1 sipproxy_5.5.3-5.04.20230407.1
Fix
[WMS-15759] - wms: added custom config parameter that allows to avoid an issue in which WP phones of Call group members continued to ring after the call was answered, which occurred in case of large amount call group member with "Colleague" BLF buttons configured
How-to:
- Add the following parameter to /etc/callweaver/sip-general-custom.conf file:
skip_cg_members_early_state_presence=yes - Reload PBX engine: callweaver -x'sip reload'
When the parameter is enabled, sending PUBLISH messages is skipped.
WMS Beta 5.04.20230324.1 Date: 04.04.2023
Additional package: espamonitor_5.04.20230403.1 wms-wildixair-firmwares_5.04.20230403.1
Fix
[WMS-16614] - dev: new W-AIR firmware v530b11 which includes fixes of the following issues:
- Bad audio quality during calls in case of a large W-AIR network after upgrade to 530b0801 and 530b802, caused by W-AIR bases randomly starting to have huge network latency.
- UI issue on W-AIR Basic2 handset with firmware v.531b1, in which there was black area on the screen under the clock.
- An occasional issue when it wasn’t possible to upgrade voice prompts.
- A call could not be muted by pressing the 'Mute' button on W-AIR Headset.
- After placing a call from Collaboration and getting rejected for any reason (e.g. invalid or busy number), base station attempted to call the same number 4 times.
[WMS-16788] - wms: fixed a rare issue of ESPA Monitor switching protocol on old installation which could lead to such an issue as impossibility to generate calls
WMS Beta 5.04.20230324.1 Date: 30.03.2023
Fix
[WMS-16713] - sys: fixed an issue when after some updates on the Zoho CRM side, users having Zoho PhoneBridge Integration with Wildix experienced data loss (call activity in Zoho CRM could not be created)
WMS Beta 5.04.20230315.1 Date: 22.03.2023
Fixes
[WMS-15999] - wms: fixed an occasional issue in which there was no audio during outgoing calls to external numbers
[WMS-16578] - x-ca: fixed an issue in which some data in Agent Reports in x-caracal wasn’t deleted as configured in WMS -> PBX -> Call and chat history -> Settings
WMS Beta 5.04.20230209.1 Date: 3.03.2023
Additional package: wildix-cw-5.04.20230228.1
Fix
[WMS-16369] - sys: fixed an issue in which there was no music on hold for the first user in Conference call, if the user was added to the conference via attended transfer
WMS Beta 5.04.20230209.1 Date: 20.02.2023
Fix
[WMS-16272] - wms: made some security improvements
WMS Beta 5.04.20230208.1 Date: 09.02.2023
Fixes
[WMS-16183] - wms: fixed an issue, in which it was not possible to import users from Zoho in case the domain was other than zoho.com (e.g. zoho.eu, etc.)
[WMS-16188] - sys: fixed an issue of poor PBX performance in cases when there were too many call recordings at a time
WMS Beta 5.04.20230116.1 Date: 30.01.2023
Additional packages: wildix-cw-5.04.20230126.1 wildix-provision_5.04.20230126.1 wildix-lua-base_5.04.20230126.1 wildix-dialplan_5.04.20230126.1
Fix
[WMS-16148] - sys: fixed an issue in which an incoming external call failed when it was forwarded via CLASSOUND trunk
WMS Beta 5.04.20230116.1 Date: 18.01.2023
Fix
[WMS-16097] - wms: fixed a security issue when an authorised unprivileged user could get admin level rights
WMS Beta 5.04.20230104.1 Date: 12.01.2023
Fix
[WMS-16066] - dev: rolled back W-AIR firmware v. 0530b9 due to found issue in which W-AIR base stations randomly started to have huge network latency until rebooted, which resulted in such an issue as bad audio during calls W-AIR firmware v. 530b802
WMS Beta 5.04.20221229.2 Date: 29.12.2022
Fix
[WMS-15986] - sys: fixed an issue with SSL certificates renewal
WMS Beta 5.04.20221217.2 Date: 19.12.2022
Fixes
[WMS-15847] - sys: fixed an issue in which PIN was not created for users in LDAP after upgrade to WMS v. 5.04.20221115.1, which led to such issues as impossibility to access Voicemail with existing password or login with feature code 99
[WMS-15910] - sys: fixed a vulnerability issue with Server-side request forgery (SSRF) via the component ZohoClient.php in the WMS
Note: Manual fix was delivered by Wildix RnD to all PBXs (independently of the version). A final fix was released to the repository rel50beta in version 5.04.20221217.2
(which means that after any upgrade - the PBX will still have the secure version).
WMS Beta 5.04.20221214.1 Date: 15.12.2022
Fix
[WMS-15744] - wms: improved the upgrade logic to fix an issue in which Hardware PBX could not upgrade from WMS 5 to WMS 6 because of lack of space
WMS Beta 5.04.20221209.1 Date: 14.12.2022
Improvement
[WMS-15733] - sys: improved the logic so that root partition is automatically increased on Hardware PBXs depending on the disk size
Fixes
[WMS-15530] - sys: fixed an issue in which license on Hardware/ Virtual PBX deactivated after its first activation or after changing license serial
[WMS-15541] - sys: fixed an issue of PBX engine memory leaks with large uptime which occurred on Failover PBXs
WMS Beta 5.04.20221208.2 Date: 09.12.2022
Improvement
[WMS-15061] - sys: improved system security
Fixes
[WMS-15570] - sys: fixed an issue in which active calls dropped during PBX sync process in load sharing scenario
[WMS-15794] - sys: fixed an issue of SIP proxy crash in some rare cases
WMS Beta 5.04.20221118.1 Date: 2.12.2022
Additional package: wildix-cw 5.04.20221129.1
Improvement
[WMS-15746] - sys: improved PBX engine stability and performance
WMS Beta 5.04.20221118.1 Date: 25.11.2022
New Firmware
New firmware W-AIR v. 0530b9
[WMS-15573] - dev: released new firmware for W-AIR bases, handsets, and repeaters, which includes fixes of the following issues:
- in case an initiated call was rejected for some reason, the base repeated the attempts to call the number 4 times
- it wasn’t possible to start an outgoing call (the call failed with “Insufficient resources” message)
- voice prompts could not be upgraded
WMS Beta 5.04.20221118.1 Date: 23.11.2022
Fix
[WMS-15452] - sys: fixed an issue in which users received false notifications about the state of SIP Trunk registration
WMS Beta 5.04.20221115.1 Date: 16.11.2022
Fix
[WMS-15673] - wms: fixed an issue in which pop-up messages were not visualised in WMS if admin used French language and the WMS network was not aligned with licences on the PBX
Note: in WMS 5.04.20221104.2, the issue also affected visualisation of some pages in WMS (e.g. Users and Debug page)
WMS Beta 5.04.20221104.2 Date: 11.11.2022
Improvement
[WMS-15517] - x-ca: to optimise system performance, improved the logic so that x-caracal tab in browser is paused after 10 minutes of inactivity
Fixes
[WMS-14649] - col: fixed an issue in which it wasn’t possible to see incoming video stream from 2N intercom during an outgoing call, after upgrade to Chrome 103
[WMS-15266] - sys: fixed an issue in which auto upgrade of Hardware PBXs could not be started due to lack of space at /var/log/ directory
WMS Beta 5.04.20221024.1 Date: 26.10.2022
Improvement
[WMS-12048] - wms: added possibility to configure trusted IP list in WMS How-to:
- Go to WMS -> Settings -> PBX -> Security
- Navigate to the Trusted IPs list section
- In the Trusted IP field, enter the IP addresses you want to add to the trusted list
Notes:
- Allowed values are: valid IP addresses (subnets are not allowed)
- Maximum number of IPs that can be added: 32
Fixes
[WMS-14952] - sys: fixed an issue with switch status reverting to disabled after triggering switch function key in Collaboration, mobile apps and WP phones
[WMS-15041] - sys: fixed an issue in which a call, after being abruptly ended for some reason (e.g. electric supply off), was still displayed as active in CDR-View and PBX logs
[WMS-15050] - sys: fixed an issue in which the list of temporary banned IP addresses in SIP blocks menu in WMS contained outdated data
[WMS-15252] - sys: fixed an issue in which incoming CLASSOUND calls immediately dropped due to codec mismatch
[WMS-15265] - sys: fixed a rare issue with missing logs in wms.log file after PBX upgrade
WMS Beta 5.04.20220930.1 Date: 30.09.2022
Fix
[WMS-14968] - wms: fixed an issue in which PBX didn’t recognize call class if the call was made from PBX in the US region with country code 1 USA and the ACL rule ‘Can/Cannot call’ was ignored
WMS Beta 5.04.20220921.1 Date: 21.09.2022
Improvement
[WMS-15054] - sys: for improved security, closed Port 53 for public networks on Hardware / Virtual PBXs
WMS Beta 5.04.20220914.1 Date: 19.09.2022
additional packages: wildix-cw 5.04.20220916.1 wms-wildix2-firmwares 5.04.20220916.1
New Firmware
WorkForce firmware v. 65.145.6.30
[WP-211] - dev: fixed an issue in which WorkForce randomly rebooted in case DuoLED-BT headset was used
WMS Beta 5.04.20220914.1 Date: 16.09.2022
Fix
[WMS-14950] - col: fixed an issue when after selecting a colleague via the search field, with whom didn’t chat or call to before, the chat tab didn’t change and it took a very long time to open a chat with the selected user
WMS Beta 5.04.20220902.1 Date: 14.09.2022
Additional packages x-caracal 5.04.20220913.1 wildix-cw 5.04.20220914.1 wildix-data-engine 5.04.20220914.1
Fixes
[WMS-15049] - x-ca: fixed an issue in which REST API returned empty data after WMS upgrade to v. 5.04.20220325.8
[WMS-15085] - sys: fixed an issue of PBX engine crash in some rare cases
WMS Beta 5.04.20220902.1 Date: 13.09.2022
Additional packages wildix-cw 5.04.20220912.1 wildix-data-engine 5.04.20220912.1 wildix-provision 5.04.20220912.1 wildix-lua-base 5.04.20220912.1 wildix-dialplan 5.04.20220912.1
Improvements
[WMS-14300] - wms: fixed an issue when members of a Call group, which also included users from another PBX in WMS Network, had unanswered call records in Collaboration History even though the calls were answered by Call group members from another PBX
[WMS-14822] - wda: improved analytics logic so that calls that come through one PBX and get automatic answer by the system (e.g. IVR) on another PBX in WMS Network, with no agent’s reply, are not considered answered and the system message is not counted as talk time
WMS Beta 5.04.20220902.1 Date: 12.09.2022
Additional package wildix-cw 5.04.20220909.1
Fix
[WMS-14489] - sys: fixed an issue in which new calls were not added to call history in Collaboration due an error on MySQL server
WMS Beta 5.04.20220902.1 Date: 8.09.2022
Fixes
[WMS-14814] - wms: fixed an issue in which PBX engine crashed in some cases: during sending fax, or when entering some commands in terminal, e.g. "queue add member 007 to 4"
[WMS-14861] - dev: fixed an issue in which the latest W-PA model reacted to "Speed Dial" Function key only after pressing the button a second time
WMS Beta 5.04.20220819.1 Date: 23.08.2022
Improvement
[WMS-14869] - wms: updated the warning message which is displayed in case WMS Network configuration is not aligned with the order on the WMP, e. g. if WMS Network is enabled on a standalone PBX
WMS Beta 5.04.20220815.2 Date: 17.08.2022
Improvement
[WMS-14691] - wms: improved the upgrade logic by blocking upgrade to the next major WMS version in case of wrong WMS Network configuration, to avoid issues with calls
Notes:
- PBX can still upgrade within the same major WMS version
- To be able to upgrade to the next major WMS version, e.g. from WMS 5 to WMS 6, WMS Network has to be configured correctly, matching the licences ordered on the Wildix Management Portal
Fix
[WMS-13911] - col: fixed one-way audio issue in case of a call from Collaboration to a device that doesn’t support Opus codec, if there was an automatic answer (e.g. in case of Away status) before user answered the call
[WMS-14017] - col: fixed an issue when user didn’t receive notification about unread group chat message and the message was marked as read, if user was on a different tab in Collaboration (other than Chat) or after login
New Firmware
W-AIR firmware v. 530b801
[WMS-14652] - dev: fixed an issue with W-AIR base stations in which attempts to start an outgoing call failed resulting in “insufficient resources” error message
WMS Beta 5.04.20220805.1 Date: 12.08.2022
Additional packages: wildix-cw 5.04.20220808.2 wildix-base 5.04.20220812.1 sipproxy 5.5.3-5.04.20220808.1
Fixes
[WMS-14669], [WMS-14689] - sys: fixed an issue of PBX engine crash in some rare cases
[WMS-14801] - sys: fixed an issue in which the ‘migrate2cloud’ script failed to execute
WMS Beta 5.04.20220805.1 Date: 8.08.2022
Fix
[WMS-14612] - wms: fixed an issue in which BRI/ PRI trunks were not displayed on Trunks page in WMS after upgrade to WMS 5.04
WMS Beta 5.04.20220726.2 Date: 1.08.2022
Additional packages: wildix-sslh 5.04.20220728.1 whoteld 5.04.20220728.1
Fix
[WMS-14469] - sys: fixed an occasional issue, in which Hotel integration stopped working because WHotel daemon crashed and could not be restarted automatically
WMS Beta 5.04.20220726.2 Date: 26.07.2022
Fixes
[WMS-14457] - sys: fixed an issue in which calls routed through WMS network randomly dropped in some cases
[WMS-14519] - sys: fixed an issue in which x-caracal log files were not rotated
[WMS-14613] - sys: fixed an issue in which “Enable routing eth0” was deactivated after reboot on Hardware or Virtual PBX, after upgrade to WMS 5.04.20220506.5
WMS Beta 5.04.20220722.1 Date: 22.07.2022
Fixes
[WMS-14464] - sys: fixed an issue in which licence renewal failed and WMS admin got the notification “An error occurred while updating the licence. For the correct work of all services, copy PBX key and reactivate the licence”
[WMS-14544] - wms: made some security improvements
[WMS-14602] - sys: fixed an issue of PBX engine restart because of a deadlock after executing the cli command 'sip show channels'
WMS Beta 5.04.20220714.2 Date: 15.07.2022
Fixes
[WMS-12232] - sys: fixed some rare performance issues (e.g. web interface stuck on ‘Proceeding’ during phonebook import) on Hardware/ Virtual PBX, faced by users with some router models/ firewalls
[WMS-14017] - col: fixed an issue when user didn’t receive notification about unread group chat message and the message was marked as read, if user was on a different tab in Collaboration (other than Chat) or after login
[WMS-14079] - col: fixed an issue with Colleague Fn key functionality in Collaboration, in which there was no audio beep notification for an incoming call, though Audio notification option was enabled
[WMS-14135] - x-ca: fixed an issue when x-caracal reports sent in scheduled reports email via Run Now button didn’t contain all required information
[WMS-14238] - wms: security improvements
WMS Beta 5.04.20220627.1 Date: 06.07.2022
Fix
[WMS-14423] - col: Collaboration stability and performance improvements
WMS Beta 5.04.20220622.1 Date: 24.06.2022
Fix
[WMS-12208] - sys: fixed an issue in which the feature "Notify by email in case SIP trunk registration status is changed" didn’t work and PBX admin didn’t receive an email notification starting from WMS 5.03
WMS Beta 5.04.20220621.1 Date: 21.06.2022
Improvement
[WMS-14265] - wms: improved the logic of Active Directory login: 1) added Full domain field to Active Directory settings to give possibility of entering custom domain; 2) in case data entered in login field contains “\” or “@” it is automatically used as a login
Fix
[WMS-14338] - sys: fixed an issue of SIP proxy crash in some rare cases
WMS Beta 5.04.20220615.2 Date: 20.06.2022
Fix
[WMS-14256] - sys: updated Monit service for improved performance and security
WMS Beta 5.04.20220615.2 Date: 16.06.2022
Fixes
[WMS-13869] - sys: fixed an issue in which in some rare cases PBX couldn't reconnect to external MySQL database
[WMS-14192] - wms: improved the logic of phonebooks import, so that country code is added to the Extension field if the extension consists of 7 or more digits
[WMS-14246] - dev: fixed an occasional issue of poor audio quality during calls on W-AIR headsets after upgrade to WMS 5.04.20220309.1
[WMS-14275] - sys: fixed an issue in which call and chat history cleanup didn’t work after upgrade to WMS 5.04.20220425.1
WMS Beta 5.04.20220608.1 Date: 13.06.2022
New Firmware
New firmware W-AIR Base Multicell v. 530b4
[WMS-14365] - dev: downgraded W-AIR Base Multicell from v530b8 to 530b4 due to an issue in which it was impossible to make calls on large installations
WMS Beta 5.04.20220608.1 Date: 08.06.2022
Fix
[WMS-14250] - col: fixed an issue when it wasn’t possible to start a call via Collaboration on Google Chrome 103 beta
WMS Beta 5.04.20220531.1 Date: 06.06.2022
Fixes
[WMS-12150] - sys: fixed a rare issue in which users faced “Your connection is not private” error message when trying to access Collaboration
[WMS-13950] - sys: fixed a rare issue in which there was no audio during a call in Collaboration
[WMS-14106] - sys: fixed an occasional issue during calls from MS Teams with teams4wildix integration to external numbers with IVR, in which attempts to enter some digits failed as DTMF tones were not recognized by the PBX
WMS Beta 5.04.20220516.1 Date: 27.05.2022
Improvement
[WMS-14127] - sys: added delivery of Wildix packages to aptly.wildix.com for PBX upgrades
Documentation: Ports used by Wildix services
New Firmware
New firmware WelcomeConsole v. 68.145.2.47
[WP-200] - dev: improved performance of WelcomeConsole with MonoLED-BT/ DuoLED-BT headset to ensure better call stability
WMS Beta 5.04.20220516.1 Date: 25.05.2022
Additional package wildix-cw 5.04.20220523.1
Fix
[WMS-14025] - wms: fixed an occasional one-way audio issue on WP phones which happened in the following case: a call from WMS network was made to a WP phone, the WP phone made semi-attended transfer with Direct RTP to another WP phone in the same network; custom codecs were configured on the PBX.
WMS Beta 5.04.20220516.1 Date: 23.05.2022
Additional package x-caracal_5.04.20220517.1
New Feature
[WMS-13623] - x-ca: added French, Portuguese, and Spanish localizations of x-caracal
WMS Beta 5.04.20220516.1 Date: 18.05.2022
Fixes
[WMS-13893] - sys: fixed an issue in which Collaboration occasionally crashed after a colleague received a call from contact in external phonebook, in case caller name lookup was enabled and the contact name contained non-ASCII characters
[WMS-14038] - sys: fixed an issue with CLASSOUND in which after trying to send SMS to an incorrect number, SMS daemon crashed and further SMS were not sent
New Firmwares
New WelcomeConsole firmware v. 68.145.2.46 WP480GR3 firmware v. 63.145.10.38, Start firmware v. 150.145.2.10 WorkForce firmware v. 65.145.6.28
[WP-199] - dev: security improvements for WP phones
WMS Beta 5.04.20220509.1 Date: 10.05.2022
New Feature
[WMS-10874] - x-ca: added support for scheduled reports in x-caracal
How-to:
- Go to x-caracal -> Setup -> Schedules/ Alerts
- Note: The Setup menu is available only for a manager who is a user with Admin user type.
- Configure the report settings under New Scheduled Report: enter destination email (you can add multiple emails, separated by comma), select the reports to be sent, queues, time range, cron configuration.
- Tick off the checkbox next to Active and click Save. The report appears in the list of Scheduled Reports and Alerts on the right, where you can modify or delete it.
Documentation will be updated soon.
Improvement
[WMS-13974] - sys: for improved security, closed the following unnecessary ports on the PBX:
- TCP/ UDP 111
- TCP 53
- TCP 389
- TCP 636
Fix
[WMS-13992] - col: fixed an issue in which “Hide offline users” feature in Collaboration didn’t work unless the page was refreshed or other changes were made, after upgrade to WMS 5.04
WMS Beta 5.04.20220504.4 Date: 04.05.2022
New Feature
[WMS-12815] - sys: added support for import of contacts from Hana DB
How-to:
- Go to WMS -> Users -> Phonebooks
- Select/ create a phonebook and click "Import"
- Select Hana DB as Backend
- Enter credentials and Database name
- Click "Save and Import"
Fixes
[WMS-13922] - col: fixed an issue in which names of some fields (VAT ID, Document type, Document number) were not displayed in Collaboration -> Phonebook -> contact details
[WMS-13996] - col: fixed an issue in which it was impossible to set tags in Collaboration -> History if they contained 2 or more words separated by spaces or ampersand (&), after upgrade to WMS Beta 5.04.20220425.1
[WMS-14044] - sys: fixed an issue in which Call History in Collaboration app on Android failed to load after upgrade to WMS Beta v 5.04.20220422.2
New Firmware
New WorkForce firmware v. 65.145.6.28
[WP-202] - dev: fixed an issue in which WorkForce occasionally rebooted in case DuoLED-BT headset was used and there was no audio during calls after the reboot
WMS Beta 5.04.20220425.1 Date: 27.04.2022
Additional package x-caracal 5.04.20220426.1
Fix
[WMS-13902] - x-ca: fixed an issue in which x-caracal search didn't return any results
WMS Beta 5.04.20220425.1 Date: 26.04.2022
Fix
[WMS-13962] - wms: fixed an issue when Call History in Collaboration failed to load after upgrade to WMS Beta v 5.04.20220422.2
WMS Beta 5.04.20220422.2 Date: 22.04.2022
Fixes
[WMS-13934] - sys: fixed one way audio issue if a call was put on hold and resumed/ transferred from FXO gateway after upgrade to the latest WMS Stable 5.04
[WMS-13319] - wms: fixed an issue in which changes of preferences for multiple users who were Call group members led to incorrect presence status in Call groups
[FXX-19] - dev: rolled back FXS/FXO gateways firmware due to found issue with configuration reset after upgrade from WMS 5.03 to the latest WMS Stable 5.04
- W02FXS r3 v 27191018
- W04FXO r3 v. 27811018
- W04FXS r3 v. 27811018
- W24FXS r3 v. 27811018
WMS Beta 5.04.20220418.2 New Firmware Date: 20.04.2022
New Firmware
New firmware for WelcomeConsole v. 68.145.2.45
[WP-184] - dev: fixed some issues emerging after hanging up a call from DuoLED-BT headset connected to WelcomeConsole:
- there was no ringtone on an incoming call
- it was impossible to answer a second incoming call/ retrieve a call from waiting
- 2-3s audio delay for a caller
WMS Beta 5.04.20220418.2 Date: 18.04.2022
Improvements
[WMS-12707] - sys: improved the logic of clearing CDR data, so that both local and external CDR databases follow the same cleanup rules (configured in WMS -> Settings -> PBX -> Call and chat history)
[WMS-13737] - wms: added a warning notification if a serial number in the domain is used to access WMS
Fixes
[WMS-9812] - col: fixed an issue in which pop-up notification for BLF key “Call group” didn’t work correctly and wasn’t cleared in Collaboration after the call was answered, if there were 2 simultaneous calls to the Call group
[WMS-11126] - sys: added Windomain field to import of users/contacts from Active Directory, to provide possibility to manually enter the domain
Note: In case the WINDOMAIN field is empty, the old logic applies and the data is automatically taken from Base DN
[WMS-12801] - wms: fixed an issue in which it was not possible to upload Company logo (fax cover) for user via WMS
[WMS-12873] - sys: fixed an issue in which local VLAN settings for FXO/ FXS r3 media gateways were deleted after provisioning and the gateways couldn’t reach PBX
[WMS-13148] - wms: fixed an issue in which the feature "Show original caller number", enabled in trunk settings, displayed called number instead of the caller, if the call was made to local user from mobile app via the Callback option
[WMS-13508] - col: fixed Collaboration UI issues in Dark mode, including color styles of buttons and menu items, typing hint, incorrect font color after enabling Dark theme, etc.
[WMS-13639] - sys: fixed an issue of distorted audio which sometimes occurred in case of a call from Vision, SuperVision, or mobile app (Android or iOS) to Voiceflex SIP trunk provider
[WMS-13662] - sys: improved the logic of estimating average hold time, which is announced to callers in queue
[WMS-13728] - sys: fixed an issue in which user status in Collaboration didn’t sync with Outlook calendar events, in case the user was new and they didn’t use Microsoft365 Settings tab in Collaboration yet
[WMS-13802] - col: fixed an issue of failed sync of big Microsoft365 phonebooks, which resulted in missing or duplicate phonebook contacts in Collaboration
[WMS-13841] - sys: fixed an issue in which calls via CLASSOUND failed if they were managed through Mobility extension lookup
New Firmware
New firmware Workforce v.65.145.6.26
[WP-152] - dev: fixed some issues with DuoLED-BT headset connected to WorkForce in which
- there was no ringtone and LED indication on an incoming call after the previous call was just hung up;
- it was impossible to answer a second incoming call
[WP-201] - dev: fixed an issue with DuoLED-BT headset connected to WorkForce, in which after changing “Headset Ring Mode” settings from “Headset” to “Speaker”, the ringtone during an incoming call was still played on the headset
WMS Beta 5.04.20220412.1 Hotfix Date: 13.04.2022
Additional packages: wildix-cw-5.04.20220413.1
Fix
[WMS-13730] - sys: fixed an occasional issue in which after closing Collaboration app on mobile (iOS and Android), users didn’t get incoming Call group calls
WMS Beta 5.04.20220412.1 Hotfix Date: 12.04.2022
Fix
[WMS-13842] - wms: fixed an issue in which sync of contacts via CardDAV stopped working after upgrade from WMS 5.03 to 5.04
WMS Beta 5.04.20220411.1 Hotfix Date: 11.04.2022
Fix
[WMS-13846] - wms: fixed an issue in which check-in via Hotel Manager was not possible after upgrade to WMS 5.04.20220325.8
WMS Beta 5.04.20220325.8 Date: 25.03.2022
Improvements
[WMS-12715] - x-ca: allowed access to REST API on x-caracal
[WMS-13384] - wms: allowed to use symbols (except for @, &, <, >) and accented characters for all languages in the Department field in WMS -> Users (when adding, editing, or importing users)
Fixes
[WMS-13456] - wms: fixed an issue in which Dialplan application “Set” -> “Caller number”/ “Caller number on trunk” and "prepend digits" option modified caller name instead of caller number
[WMS-13490] - sys: fixed an issue in which Microsoft 365 phonebooks and calendars sync didn’t work correctly after upgrade to WMS 5.04.20220309.1
[WMS-13511] - wms: added possibility to use DAVx⁵ and DAVdroid for phonebook sync for Android 10 and higher
[WMS-13513] - sys: fixed an issue of delayed audio during an external call from WP phone
[WMS-13546] - col: fixed an issue of chats taking a long time to load when refreshing Collaboration web page, after upgrade to WMS Beta 5.04.20220124
[WMS-13621] - wms: fixed an issue in which presence of users was not displayed on the Colleagues tab in Collaboration after update to WMS 5.04.20220309.1 in case chats were disabled
[WMS-13634] - wms: added logic to hide empty Departments on the Colleagues tab in Collaboration
[WMS-13640] - sys: fixed an issue in which admin didn’t get email notification about lack of free disk space on the PBX
[WMS-13663] - col: fixed an issue in which Collaboration interface was in English though Estonian language was set, which occurred after upgrade to WMS 5.04.20220228.2
WMS Beta Hotfix Date: 10.03.2022
Additional packages: wildix-cw-5.04.20220310.1
[WMS-13574] - sys: fixed an issue of call drops in some rare cases after upgrade to WMS Beta 5.04.20220228.2
WMS Beta 5.04.20220309.1 Date: 09.03.2022
Fixes
[WMS-13281] - wms: fixed an issue in which it was impossible to edit IVR settings if the IVR included 9 or more sub-menus
[WMS-13541] - col: fixed an issue in which user received "WebRTC Error Forbidden" message in Collaboration after upgrade to WMS Beta 5.04.20220228.2 if Call control mode was enabled
WMS Beta 5.04.20220304.2 Date: 07.03.2022
Improvements
[WMS-11389] - sys: removed VPN tunnel usage from WMS network logic (in WMS 5.03 it was used for backward compatibility to work with PBXs with WMS 5.02 or older)
After upgrade to WMS 5.04.20220304.2 all PBXs of WMS network have to be upgraded to WMS 5.04.20220304.2
[WMS-13537] - col: removed Russian from the supported languages in Collaboration and WMS
Fixes
[WMS-13098] - x-ca: fixed an issue in which x-caracal failed to display long time range reports (e.g. Agent Summary, Distribution) on highly loaded PBX
Note:
The following limits for maximum allowed days range were applied:
- Less than 500K records - max 180 days
- 500K - 700K records - max 120 days
- 700K - 900K records - max 60 days
- 900K and more - max 31 days
To set custom limit (for example 50 days), add the following parameter to /var/www/x-caracal/.env file:
MAX_ALLOWED_DAY_RANGE=50
[WMS-13279] - sys: fixed a rare issue of voicemail message loss in case of high load and if Call Group notifications manager was enabled
[WMS-13427] - sys: fixed an issue of dropped calls via VoIP operator Netiwan
[WMS-13504] - sys: fixed an issue in which in some rare cases multiple user registrations and multiple calls didn’t work correctly
New Firmware
New W-AIR firmware version 0530b8
[WMS-13526] - dev: new W-AIR firmware which includes fixes of the following issues:
- W-AIR base automatically rebooted after W-AIR handset received an incoming video call
- W-AIR base crashed with error 43
- W-AIR base stations got wrong RFPI Address after adding new base stations, which led to loss of handset registrations
- dropped calls while moving between base stations because of issue with LAN sync
WMS Beta 5.04.20220228.2 Date: 02.03.2022
Improvement
[WMS-13461] - sys: enabled possibility to use Hold button on Collaboration mobile app for calls made via GSM and which are passing through PBX
Fixes
[WMS-10210] - col: fixed an issue in which there was no audible ringing during an incoming call in Collaboration on Chrome, if user opened Collaboration for the first time and, without making any actions in Collaboration, switched to another tab In case the ringtone on incoming call is not played correctly, user is prompted to go to browser Settings -> open "Site settings" under the "lock" icon and change "Sound" permission to "Allow".
[WMS-12350] - wms: fixed an occasional issue in which it impossible to delete user in WMS in case the “Delete user data” checkbox was enabled and user had large amount of data in CDR-View
[WMS-12962] - col: removed the “Close” button in CDR-View, which caused restart of Collaboration and call drops; CDR-View can be closed using the close icon (x)
[WMS-13420] - sys: fixed some rare provisioning and Dialplan issues, which could lead to incorrect work of voicemail and user statuses
WMS Beta 5.04.20220225.2 Date: 25.02.2022
Improvements
[WMS-13049] - wms: enabled wideband codec usage for all networks by default to improve audio quality and avoid no audio issue
Notes:
- Wideband codec is forced for all devices (g711 always has higher priority compared to g729). If you want to enforce g729, this can be done via Dialplan configuration (Set application -> Codecs -> choose the preferred option).
- With wideband codecs, the following priorities apply:
- opus
- alaw
- ulav
- g729
- The following settings were removed from WMS -> PBX -> SIP-RTP interface:
- Enable wideband codec usage for all networks
- Networks where force usage of wideband codecs
- Use TLS / SRTP for local devices (Hardware, Virtual PBX)
- Enable wideband codec usage in LAN (Hardware, Virtual PBX)
- To return to the previous behaviour, use the new custom provisioning parameter "WideNarrowbandUse" (only for general section).
Possible values:
WideNarrowbandUse=no / or not set: all devices use wideband codec and remote codecs priority
WideNarrowbandUse=yes: previous behaviour remains: all devices use wideband codec priority or narrowband codec priority and remote codecs priority or local codecs priority
Important: In case WideNarrowbandUse=yes, you need to add the following lines to etc/callweaver/sip-wideband.conf to set the parameters: --To Enable wideband codec usage for all networks forcewideband=yes disableautowideband=yes
- To Enable wideband codec usage in LAN
forcewideband=no
disableautowideband=no
- To set Networks where force usage of wideband codecs (i.e. for network 10.100.6.0/16)
forcewideband=no
disableautowideband=yes
wideband=10.100.6.0/16
Documentation: Provisioning Custom Settings
[WMS-13219] - col: added Dark theme support for Collaboration
How-to:
- Go to Settings -> Personal
- Enable Dark theme
Fixes
[WMS-10037] - col: fixed an issue in which DND/ Away status of users who used only WP devices was displayed incorrectly in Collaboration
[WMS-13303] - col: fixed an issue of chats taking a long time to load when refreshing Collaboration web page, after upgrade to WMS Beta 5.04.20220124
New Firmware
New WorkForce firmware v. 65.145.6.24
[WP-171] - dev: fixed an issue in which phone user heard an echo during a call with user of WorkForce with DuoLED headset
WMS Beta 5.04.20220222.2 Date: 23.02.2022
Improvement
[WMS-13375] - wms: added an option to skip audio prompts in Dialplan application “Mobility extension lookup”
How-to: In Mobility extension lookup -> Options, click Set and choose the option “Skip audio prompts”. By default, it is disabled.
Fixes
[WMS-12793] - sys: fixed user import issue in which information in the fields, not selected in the import settings, was erased on the PBX side if "Erase existing value if empty value is received (only for Fax, Office, Email, Mobile, Department, Image URL)" was enabled
[WMS-13157] - sys: fixed an issue of muted audio during a call and call drop after migration from Hardware PBX to Cloud PBX, caused by incorrect public IP configuration
WMS Beta 5.04.20220215.1 Date: 18.02.2022
Improvements
[WMS-13172] - col: improved the logic of displaying Departments tree on the Colleagues tab in Collaboration:
- The Colleagues tab now shows only the list of Departments
- If user’s Department field in WMS is empty, Group name is automatically used as Department after the upgrade. This doesn’t apply to imported users, their Department fields remain empty.
Notes:
- Users that have no Department data are added to the Other section on the Colleagues tab.
- In case there isn’t a single Department filled out in WMS, the Colleagues tab displays only one section - “All”.
Fixes
[WMS-13202] - dev: fixed an issue in which Static IP set before provisioning of W04FXO r3 changed to Default DHCP after restart of the provisioned gateway
[WMS-13243] - sys: fixed a rare issue of missing audio during a call between PBXs in the same WMS Network
WMS Beta 5.04.20220214.1 Date: 15.02.2022
Improvements
[WMS-9774] - wms: improved interface of Trunks page in WMS:
In SIP, BRI/ PRI, and GSM/UMTS sections:
- changed + and - buttons to Add and Delete
- displayed information on how many entries are shown
- changed design of the tables and Edit windows
- in the window for editing trunk, added the title of the trunk
[WMS-12831] - dev: added a new custom parameter for FXSR3 devices, that fixes a rare issue of a slow fax reception speed in US/Canada
How-to:
Add the following parameter to the [wildixfxs2] section of /rw2/etc/provision.conf file:
ToneDetectByPeer=yes
To disable the parameter, change the parameter value to “no”.
By default, it is disabled.
Documentation: Custom config parameters List
[WMS-13368] - sys: PBX engine stability improvements
[WMS-13399] - col: improved the logic of displaying link previews in Collaboration, by caching the data, to reduce load on the service in case of multiple links in the chat
Note: Cache lifetime is 1 day
Fix
[WMS-13121] - x-ca: fixed 502 Bad Gateway issue which appeared when applying filters in x-caracal on PBXs with a big number of groups/ agents (e.g. 170+)
WMS Beta 5.04.20220209.1 Date: 10.02.2022
Fixes
[WMS-11530] - wms: fixed an issue, in which deleting a user caused incorrect analog port configuration of FXS gateways
[WMS-12246] - sys: fixed an issue in which BLF keys on WP phones displayed incorrect status of users with no registered devices, which occurred after PBX reboot
[WMS-13150] - col: fixed an issue in which call transfer via drag and drop in Collaboration didn’t work after upgrade to WMS Beta 5.04.20220110.1
[WMS-13297] - sys: fixed a rare issue of PBX engine deadlock
[WMS-13301] - sys: fixed an issue of PBX engine crash in some rare cases
WMS Beta 5.04.20220201.1 Date: 2.02.2022
Improvement
[WMS-12115] - wms: made some improvements to x-caracal activation process on Virtual PBX, which include: 1) display of error messages in case the fields were filled out incorrectly, e.g. unsupported characters used 2) Database Name field added
[WMS-13138] - sys: updated SIP Proxy service to the latest stable version 5.5.3
Fixes
[WMS-11254] - sys: fixed an issue in which calls to Canary Islands were displayed with incorrect Call class in CDR-View
[WMS-13187] - sys: fixed a rare issue of PBX engine crash
WMS Beta 5.04.20220124.2 Date: 25.01.2022
Fixes
[WMS-9651] - sys: fixed an issue of distorted audio in conference, if the conference was joined by Vision, SuperVision or WorkForce via feature code Conference and audio instructions
[WMS-13144] - sys: fixed an issue of PBX engine crash in some rare cases
New Firmwares
New firmware for W02FXS r3 version 27.19.10.19, for W04FXO/ W04FXS/ W24FXS r3 version 27.81.10.19.
[FXX-12] - dev: fixed a rare issue in which FXS/ FXO r3 media gateways failed to upgrade the firmware
WMS Beta 5.04.20220117.2 Date: 18.01.2022
Improvements
[WMS-12192] - wms: added support for online streaming of mp3 http/ https sources as Music on hold class in Call groups
How-to:
- Add the following parameters to the file /rw2/etc/callweaver/musiconhold-stream.conf, where "http://stream.104.6rtl.com/rtl-live/mp3-192" is your stream source:
- [radio]
- mode=custom
- application=/usr/sbin/cw_play_http_stream.sh http://stream.104.6rtl.com/rtl-live/mp3-192
- Run the command:
- rcallweaver -rx "moh reload "
- Documentation: Custom config parameters List
- In Dialplan application Call group -> Music on hold class, select the option "radio"
- Documentation: Dialplan applications - Admin Guide
Note: in case you have several streams, modify the parameter [radio] to [radio1]/[radio2]/ etc. in the config file and choose the corresponding option ("radio1", "radio2", etc.) in the Dialplan.
[WMS-13078] - wms: added possibility to use special characters (“\”, “/”, “|”) in the Department field when using API functions PUT and POST for Colleagues, which provides opportunity of user import for PBX with multilevel Departments tree
WMS Beta 5.04.20220112.4 Date: 14.01.2022
Fixes
[WMS-12987] - wms: fixed an issue in which changes of RTP port range in Settings SIP-RTP were not applied
[WMS-13161] - wms: fixed an issue when after accessing Wizyconf videoconference via a link in the same browser as Collaboration, user was not redirected from https://conference.wildix.com to the PBX domain
WMS Beta 5.04.20220112.1 Date: 12.01.2022
Fixes
[WMS-12665] - sys: fixed an issue in which Voicemail playback was in English in case of an incoming external call, though a different language was chosen in user Settings
[WMS-12766] - wms: fixed an issue in case of large phonebooks (with 70k+ records) when entering a phone number in Collaboration Search field could lead to issues with calls and other operations on the PBX due to high load
[WMS-12768] - wms: fixed an issue when in some rare cases BLF keys on WP phones didn’t display presence of monitored users
[WMS-12940] - sys: fixed an issue in which completing an attended transfer on some Wildix phones required additional steps besides placing the receiver in case another user used call Pickup to intercept the call
[WMS-13143] - dev: fixed an issue in which WorkForce didn’t play opus files if user language was English, after upgrade to WMS 5.03.20211222
New Firmwares
New firmwares: Start: v. 150.145.2.9 WorkForce: v. 65.145.6.23 WelcomeConsole: v. 68.145.2.44 WP410 r2: v. 50.145.6.175 WP480 r3: v. 63.145.10.37 WP490 r3: 67.145.8.107
[WP-165] - sys: fixed an issue with distorted audio in a call between two Start phones
[WP-172] - dev: fixed DHCP registration issue after powering on of Wildix phones, which led to router overload in large systems with a big number of phones turned on at the same time
[WP-173] - dev: fixed an issue of crackling audio during a call on Start phones
WMS Beta 5.04.20220110.1 Date: 10.01.2022
New Feature
[WMS-10417] - wms: added possibility to assign W-AIR headsets and handsets to users via a new tab in WMS: Devices -> W-AIR Devices
Requirement: W-AIR handset/headset should have DECT registration on the W-AIR base station before it can be assigned to user
How-to:
- Go to WMS -> Devices -> W-AIR devices
- Choose the headset/ handset and click Assign to user
- Enter user extension and click Save.
Note: To figure out which headset received the assigned extension, you can dial this extension and see which headset rings.
To assign device to a different user:
- Choose the headset on the W-AIR devices tab -> click Assign to user
- Enter a different extension and click Save.
To deassign a device:
- Choose the headset/ handset -> click Assign to user
- Select “unknown” in the Extension field and click Save.
Fix
[WMS-12903] - wms: fixed an issue with the DIALBYNAME_PROMPT Global Dialplan variable in which the prompt containing space characters got broken as the spaces were completely removed after saving the variable, which reproduced in WMS 5.03 and 5.04
WMS Beta 5.04.20211228.2 Date: 3.01.2022
Improvement
[WMS-12590] - col: added sync of Outlook Cloud within Microsoft365 integration, which can be managed via Collaboration -> Settings -> Microsoft365 tab
Microsoft365 tab appears in Collaboration in case Microsoft365 integration is enabled in WMS Settings -> PBX -> Integrations. The tab includes the following options:
- Status mapping: set the corresponding Collaboration status for each Outlook calendar status and enable/ disable the status message
- Publish working hours
- Hide status message of private events
Notes:
- On Windows, if both Outlook native app integration and Microsoft365 integration are used simultaneously, Microsoft365 has a higher priority, Collaboration syncs with Outlook Cloud, and Microsoft365 tab replaces the Outlook tab in Collaboration -> Settings.
- On Collaboration native app and in case of teams4Wildix integration, sync with Outlook Cloud works, too.
Fixes
[WMS-13057] - sys: fixed a rare issue in which SMS could not be sent due to memory leak in SMS daemon
[WMS-13080] - wms: fixed an issue in which buttons and menu items of the WMS interface were displayed incorrectly if American English (En-us) was chosen in the Language settings of the admin user after WMS update to BETA 5.04.20211227.3
New Firmwares
New firmware for W02FXS r3: 27191018 W04FXS r3: 27811018
[FXX-10] - dev: fixed an issue in which FXS provisioning stopped working in case of a Cloud or remote PBX after Voice VLAN ID was configured for FXS media gateway on the WMS -> Devices page
WMS Beta 5.04.20211227.3 Date: 27.12.2021
Improvement
[WMS-12964] - sys: improved the quality of music on hold in cases when online streaming of mp3 from http/ https source is used for MoH
Fixes
[WMS-12805] - wms: fixed an issue in which ISDN BRI/PRI ports didn’t show up in the dropdown menu on Trunk group Edit window and existing Trunk group with ISDN ports could not be edited in WMS Beta v. 5.04.20211102.4
[WMS-12837] - col: fixed an issue in which sync of phonebooks from Microsoft365 was interrupted if there were more than 25k records, which could result in such issues as some users missing phonebooks in Collaboration or duplicate contacts in phonebooks
[WMS-12975] - dev: fixed an issue in which Start phone displayed a blank Identities BLF key, in case the key was set up via User preferences on WMS
WMS Beta 5.04.20211222.1 Date: 22.12.2021
New Feature
[WMS-12200] - wms: added an API endpoint that allows to get general statistics about Call group's usage (number of CG members: total, logged-in, busy, available and the number of calls in queue)
New API endpoint:
GET api/v1/Dialplan/CallGroups/<id>/stat - returns the following info:
- total number of Call group members
- number of logged-in users
- number of available and busy members in the Call group
- number of calls in the queue
Notes:
- Only static members of a Call group are displayed.
- In case of PBX reboot or a newly created Call group, at least 1 call to the Call group should be made in order to get up-to-date statuses. Otherwise, all members’ statuses would be logged-in and available.
- Access to the API endpoint is available for users with Essential license or higher and in case the option “Limit call groups” is not enabled in User preferences in WMS -> Users -> Edit preferences -> Settings section.
API documentation can be accessed via PBX and by the link: https://www.wildix.com/wp-content/wms-api/
Improvement
[WMS-12953] - wizy: made improvements so that music on hold is not played in Wizyconf conference room if PBX user who called the conference puts this call on hold
Fixes
[WMS-12615] - sys: fixed an issue in which syslog stopped writing to file because of the directory overload after Failover script pbx_sync was activated
[WMS-12965] - sys: fixed an issue in which after setting Time zone to US > Pacific-New in WMS, the W-AIR Base changed its country settings and time zone to Italian, affecting time on all registered handsets
[WMS-12980] - sys: fixed an issue in which the email with voicemail recording sent to user was in English despite a different PBX language, which occurred in case of an external call
WMS Beta 5.04.20211215.3 Date: 16.12.2021
New Feature
[WMS-12817] - col: ensured Collaboration compliance with E911 requirements
Requirements:
- Country code set up in WMS Settings - Language & Region is +1 (US/ Canada) or user's office number has the prefix +1
- CLASSOUND service is activated on the PBX
Important! Geolocation must be enabled in the browser, otherwise outgoing non-emergency calls via Collaboration will be blocked (emergency calls cannot be blocked, so make sure users enable geolocation)
Fix
[WMS-12978] - sys: fixed an issue in which the option "6) Reset network settings" in WMS -> Terminal -> console menu didn’t work
New Firmware
[WMS-13012] - dev: rolled back W-AIR firmware v 530b6 because of W-AIR Base reboot and incoming call termination on W-AIR handset after 5-10 seconds, if the incoming call had video codecs in SDP in INVITE
WMS Beta 5.04.20211214.3 Date: 15.12.2021
New Feature
[WMS-12539] - col: added possibility to create multilevel hierarchy of Departments and display them in a tree view on the Colleagues tab in Collaboration
How-to:
To enable this option, add the following line in /rw2/etc/env.custom.ini file:
DEPARTMENTS_AS_TREE=true
By default, the value of the parameter is “false” and the Colleagues tab in Collaboration displays the list of Groups. When the parameter is set to “true”, the Colleagues tab displays Departments.
To create Departments tree: when adding/ editing a user in WMS -> Users (or in case of user import via a CSV file), indicate the Department path using the separator “/” in the Department field. For example:
Department: Level1/Level2/Level3/Level4 Notes:
- If the Department name contains “/” it should be replaced with another character. It is also recommended to replace long names with shorter ones.
- Users that don’t belong to any Department are added to the section Other.
- If you want to change the default separator to another character, edit the following parameter in the /rw2/etc/env.custom.ini file: DEPARTMENTS_TREE_SEPARATOR=/
- By default, only people added to Colleagues (roster) are shown. To have all users displayed, add the following line to the /rw2/etc/env.custom.ini file:
COLLABORATION_SHOW_ALL_COLLEAGUES=true
Current limitations:
- The presence of users that are not added to the roster is not available.
- It may take up to 10 minutes to apply changes in the Departments tree, enabling/ disabling the functionality, etc.
Improvement
[WMS-12514] - classound: added possibility to internationally send outgoing SMS via CLASSOUND for US/ Canadian and other country DIDs via hardcoded CURL request
Documentation: How to send and receive SMS/ MMS via CLASSOUND
[WMS-12959] - sys: added possibility to disable Error Correction Mode (ECM) and set maximum/ minimum fax transmission speed
How-to:
Changes should be made in /etc/callweaver/res_fax_custom.conf.
ECM:
ECM is enabled by default. To disable it, add the following line in /etc/callweaver/res_fax_custom.conf:
ecm=no
Maximum Transmission Speed:
- The default value is 14400.
- Possible values: 2400 | 4800 | 7200 | 9600 | 12000 | 14400
- To change the maximum transmission speed, change the following parameter in the /etc/callweaver/res_fax_custom.conf file:
maxrate=14400
Minimum Transmission Speed:
- The default value is 2400.
- Possible values: 2400 | 4800 | 7200 | 9600 | 12000 | 14400
- To change the minimum transmission speed, change the following parameter in the configuration file:
minrate=2400
Fixes
[WMS-12577] - sys: fixed an issue in which after upgrade of PBX, the ESPA monitor stopped working and its package was reinstalled, overwriting existing configurations with default ones
[WMS-12809] - sys: fixed a rare issue in which Call Group member was permanently put on pause
[WMS-12920] - sys: fixed a rare issue of PBX engine crash
WMS Beta 5.04.20211210.2 Date: 13.12.2021
Improvement
[WMS-12497] - sys: added secure HTTP headers to WMS for an extra layer of security
Fix
[WMS-12638] - dev: fixed ringtones (ringback tone, dial tone, and busy tone) on FXS and FXO devices
WMS Beta Hotfix Date: 09.12.2021
Additional packages: wms-wildixair-firmwares_5.04.20211208.1
New Firmware
[WMS-12788] - dev: new W-AIR firmware v 530b6, which contains fixes of the following issues after upgrade to v. 520b1, v. 520b2 and v. 520b4:
- bad or missing audio
- dropped calls with INSUFFICIENT_RESOURCES error
- failure to upgrade headsets
- out of memory issue or the 59 error and reboot of the base during an attempt to register a new headset
Note in case of upgrade of big installations: Maximum 8 handsets (5 in case of W-AIR Small Business) can be updated at a time per a base station.
Starting from WMS 5.03.20211207.1, the logic of even distribution of SIP registrations among all base stations in a multicell system was applied.
In case a multicell system has more than 8 handsets located on each base station, additional handsets need to be turned off during the first 8 handsets upgrade.
WMS Beta 5.04.20211207.1 Date: 7.12.2021
Fixes
[WMS-12774] - sys: fixed an issue in which missed calls notifications were sent not only to Call Group manager but also to the first user of CG
[WMS-12909] - sys: fixed a rare issue in which after PBX engine crash it was impossible to open and use Collaboration until the PBX engine was restarted
[WMS-12943] - x-ca: fixed an issue with x-caracal installation after upgrade to WMS 5.03.20210929, in which "Settings saved successfully" message appeared but x-caracal failed to be installed
New Firmwares
Daysaver New firmware v. 2.53.4.33
[FXX-9] - dev: changed the default value of the option Disable Private Internet DNS responses in DaySaver settings, which was incompatible with some configurations
Now the option is checked by default.
WelcomeConsole firmware v 68.145.2.41
[WP-164] - dev: fixed some issues with DuoLED BT Headset on WelcomeConsole in which:
- DND/ Away status had no violet/ yellow LED indication
- no busy LED indication on incoming call after answering it
WMS Beta 5.04.20211129.1 Date: 1.12.2021
Fixes
[WMS-12091] - sys: fixed a rare issue of interrupted call in case of an incoming fax or after an attended transfer, which sometimes occurred on certain trunks
[WMS-12712] - sys: fixed an issue of long login time (from several minutes to half an hour or more) on W-AIR handsets when assigning the handsets via 99 Feature Code on big W-AIR networks (with 60+ bases)
[WMS-12755] - sys: fixed a rare issue when it was impossible to make calls because of PBX engine deadlock
[WMS-12802] - sys: fixed an issue with bad quality of voicemail transcription if user email was indicated instead of a number in "Go to voicemail" Dialplan Application
WMS Beta 5.04.20211126.2 Date: 26.11.2021
Improvement
[WMS-11855] - x-ca: added possibility to deactivate x-caracal on the WMS side
How-to:
- Go to WMS -> Settings -> PBX -> Integrations -> Analytics tab
- Disable the checkbox in front of x-caracal -> Enabled, click Save and confirm
Note: Deactivating the service deletes both x-caracal and all its data.
WMS Beta 5.04.20211123.1 Date: 24.11.2021
New Feature
[WP-155] - dev: added possibility to disable speaker mode on WorkForce via custom provisioning parameter
How-to:
Add the following parameter to [wildixp2] section in /rw2/etc/provision.conf file:
SpeakerDisable
Available values:
- SpeakerDisable=yes - disables the speaker mode for all WorkForce devices;
- SpeakerDisable=no - enables the speaker mode for all WorkForce devices;
- SpeakerDisable=list of extensions (e.g. SpeakerDisable=38001,24001,22005) - disables the speaker mode for the mentioned extensions.
Improvement
[WMS-12322] - wms: added a notification in case the PBX engine failed to update license and it has to be reactivated manually
To reactivate license:
- Go to WMS Settings -> Tools and utilities -> Activation / Licenses
- Click Activate
New Firmware
New firmware for Workforce v. 65.145.6.20
[WP-167] - dev: fixed the following bad audio quality issues on WorkForce after upgrade to 65.145.6.15:
- increased background noise and too loud default microphone level in handsfree mode
- muffled sound between two WorkForce devices
- background noise in the handset's speaker
- muffled audio on WiIdix DuoLED and DuoLED BT headsets connected to WorkForce if users spoke at the same time
- WorkForce volume level higher than on WP480GR3
WMS Beta 5.04.20211119.1 Date: 19.11.2021
New Feature
[WMS-12726] - wms: added a new API endpoint that returns groups or departments with user extensions in a tree view
New API endpoint:
GET /api/v1/departments - get a list of groups
For the API endpoint to return departments in a tree view, add the following variable in /rw2/etc/env.custom.ini file:
DEPARTMENTS_AS_TREE=true
If you set DEPARTMENTS_AS_TREE=false, the endpoint returns groups.
There was also another variable for /rw2/etc/env.custom.ini added:
DEPARTMENTS_TREE_SEPARATOR=/.
It lets to customize the separator (the default one is “/”), that splits the departments tree.
Fixes
[WMS-12286] - sys: made some fixes to prevent potential out-of-memory issue because of recorded audios in temporary files after PBX engine restart
[WMS-12595] - wms: fixed an issue in which the Dialplan application Call through remote PBX allowed an external user to barge into a call, if the internal user had Call Forward Busy, Call Forward No Answer, and Call Forward All disabled in Settings
[WMS-12609] - x-ca: fixed an issue in which x-caracal failed to display reports if the selected date range was highly loaded
WMS Beta 5.04.20211110.1 Date: 16.11.2021
Additional packages: rtpengine_9.5.1-5.04.20211111.1 wildix-cw-5.04.20211115.1
Fixes
[WMS-12579] - sys: fixed a rare issue of a PBX crash which mostly occurred in case of call group calls and call transfers
[WMS-12695] - sys: fixed a one-way audio issue during a call from mobile application if mobile operator with IPv6-only network was used and WMS was upgraded to Beta 5.04.20211026.2
WMS Beta 5.04.20211110.1 Date: 11.11.2021
Fixes
[WMS-12245] - sys: fixed an issue with calls to a remote PBX in WMS Network being sent with 2-4 seconds delay
[WMS-12531] - wms: fixed an issue when it was imposible to set tags in Collaboration -> History if they contained 2 or more words with space at the beginning
[WMS-12532] - x-ca: fixed x-caracal Realtime report issues with:
- Caller ID being displayed only in the 1st Queue
- Max. wait time being not updated
- columns being not matched if Agent status was off
- number of calls waiting in a queue being not updated if all Agents were paused
[WMS-12567] - sys: fixed an issue with SMTP client infinite connection retries that caused high CPU load
[WMS-12658] - sys: fixed an issue with rsyslog being restarted by Monit Service Manager on large systems
WMS Beta 5.04.20211108.3 Date: 08.11.2021
New Feature
[WMS-12290] - wms: extended Personal settings API by adding possibility to receive and process Collaboration Contact center tab settings
Updated endpoints:
- GET /api/v1/Personal/settings/
- PUT /api/v1/Personal/settings/
Improvements
[WMS-12608] - sys: added support for W-AIR alarm feature to be configured on Cloud PBX using local HW/VM PBX as a Text Messaging & Alarm Server
Example of configuration
Preconditions:
- Provision W-AIR Bases on Cloud PBX and create W-AIR Network
- Register W-AIR Handsets on HW/VM PBX
- Assign a user from Cloud PBX to W-AIR Headset (this user will trigger an alarm)
- Assign a user from HW/VM PBX to any device (this user will receive an emergency call)
Configuration:
- Configure Alarm and Text Messaging & Alarm Server on Main W-AIR Base using HW/VM PBX IP
- Start W-AIR alarms service on HW/VM PBX
- Create a dedicated Dialplan on HW/VM PBX
Documentation will be updated later: How to get location of W-AIR Base Station in case of emergency alarm
[WMS-12616] - dev: improved the behaviour of "BaseMaxSIPReg" parameter that allows setting number of W-AIR handsets/ headsets to be distributed evenly over W-AIR Bases
The logic of distribution in W-AIR Network is as following:
- with 2 and more W-AIR Bases, the default number is 8 accounts per 1 Base
- with 1 W-AIR Base, the default number is 30 accounts
The values can be changed in /rw2/etc/provision.conf, the documentation Provisioning Custom Settings
Fixes
[WMS-11987] - sys: fixed an issue in which cleanup_voicemails_and_recordings script failed to run if a wms backup was created without a host name
[WMS-12259] - sys: fixed an issue with calls in Collaboration being not processed successfully after PBX engine crash
[WMS-12592] - sys: fixed an issue in which LDAP server failed to start if a new nonactivated HW PBX was upgraded to WMS 5.03
WMS Beta 5.04.20211102.4 Date: 02.11.2021
Improvements
[WMS-12522] - wms: added possibility to provide remote PBX domain name instead of PBX IP in sync_pbx script for failover sync configuration
Starting from WMS 5.03, SSH must be enabled on the Main PBX when Failover is activated.
[WMS-12298] - wms: removed unused config files in WMS:
- wms/wms-interface/rw2/etc/pbx/conference.conf
- wms/wms-interface/rw2/etc/cdrview.ini
- /rw2/etc/pbx/groupChat.conf
Their data was moved to the config file env.custom.ini, so relevant changes should be made in env.custom.ini.
Fixes
[WMS-12377] - sys: fixed an issue of no missed call notifications for Call group calls if there was no Call group manager
[WMS-12378] - sys: fixed an issue in which the record of outgoing call in Collaboration -> History contained extra information besides the called number or phonebook contact name when CompanyFlex trunk was used
[WMS-12498] - wms: fixed an issue in which auto-redirect from http to https in Collaboration didn’t work correctly
[WMS-12551] - sys: fixed an issue with FIAS Hotel integration (Protel PMS) in which room name was not updated after check-in in case of a WMS network where the PBX was a Client
[WMS-12563] - sys: fixed an issue in which access to LDAP server from external networks stopped working after upgrade to WMS 5.03
New Firmwares
WorkForce v 65.145.6.16, Start v 150.145.2.7.
[WP-52] - dev: fixed some issues with DuoLED BT headset on WorkForce in which:
- DND/ Away status had no violet/ yellow LED indication
- there was just one ring during an incoming call
- it was not possible to pick up or hang up a call with Multi-function button
- a call could be answered with a Mute button
- on incoming call, LED indicator blinked red, then steady red
[WP-109] - dev: fixed an issue of poor audio quality on WorkForce with firmware v. 65.145.4.20, which mostly occurred when users were speaking at the same time
[WP-124] - dev: fixed an issue of poor audio quality on Start phones when users were speaking at the same time
[WP-158] - dev: fixed an issue of bad audio quality between two Start phones with direct RTP enabled
WMS Beta 5.04.2011026.2 Hotfix Date: 27.10.2021
Additional packages: wildix-cw-5.04.20211027.1
Fix
[WMS-12607] - sys: fixed an issue of PBX engine crash which sometimes occurred after hanging up a call
WMS Beta 5.04.20211026.2 Date: 26.10.2021
New Features
[WMS-12108] - sys: integrated res_json module to handle json format inside DiaplanGithub doc: https://github.com/drivefast/asterisk-res_json
Documentation: How to handle JSON inside Diaplan in WMS.
[WMS-12109] - wms: added Simple Token authentication method
...
- Open WMS -> Settings -> PBX -> Integrations
- Go to Applications tab -> Simple token
- Click Add and get a token
Improvements
[WMS-9771] - wms: added new API endpoints for trunk lists
API endpoints for SIP trunks:
- GET /api/v1/Trunks/Sip/ - Get a list of SIP trunks
- POST /api/v1/Trunks/Sip/ - Create a SIP trunk
- PUT /api/v1/Trunks/Sip/{id} - Update a SIP trunk by id
- DELETE /api/v1/Trunks/Sip/{id} - Delete a SIP trunk by id
API endpoints for PSTN trunks:
- GET /api/v1/Trunks/Pstn/ - Get a list of PSTN trunks
- POST /api/v1/Trunks/Pstn/ - Create a PSTN trunk
- PUT /api/v1/Trunks/Pstn/{id} - Update a PSTN trunk by id
- DELETE /api/v1/Trunks/Pstn/{id} - Delete a PSTN trunk by id
...
- Go to WMS -> Trunks -> Trunk tab -> choose trunk and click Edit
- On the Edit trunk window click Advanced and tick the checkbox Play remote MoH
Requirement:
- Make sure the Support Refer and Hold option in Advanced settings is enabled, otherwise Play remote MoH won’t work.
[WMS-11786] - sys: updated RTPengine to the latest version for improved stability
...
[WMS-11979] - dev: added possibility to control duration of the delay before answering a call on W04FXO r3 via custom provisioning parameter
How-to:
- Add the following parameter to the /rw2/etc/provision.conf file:
...
- DelayAfterOffhook = 1-255
Note:
- The parameter is only applicable to [wildixfxo3] section
...
[WMS-12003] - wms: improved import of users, displaying the list of users that will be added, updated, or removed
...
- [PUT] http://<pbxHost>/api/v1/network/pbx/<serial>/ - to edit the failover PBX
- [DELETE] http://<pbxHost>/api/v1/network/pbx/<serial>/ - to remove a PBX
Note:
- These actions can be performed only on main PBX and only by an admin.
Also added the parameters “version” and “failover” to the existing API endpoint [GET] http://<pbxHost>/api/v1/network/pbxes response.
Fixes
[WMS-9015] - sys: fixed an issue of no CDR record created for an incoming call to a Call group, if the call was answered with the BLF Function key Call group and the Call group Dialplan included Record call application
...
Check this guide for instructions: https://confluence.wildix.com/x/FYfZBQ How to configure Failover by DNS for DaySaver
[WMS-12038] - sys: fixed an issue with no audio in Collaboration during an outgoing call in case the called user was Away, the call was made to mobility and a caller heard an audio message before the call was answered; or in similar cases
...
[WMS-12307] - sys: added a parameter that fixes an issue of FIAS Hotel integration (ASA PMS), in which it was impossible to make outgoing calls from rooms after check-in
How-to:
- Add the following parameter to /etc/wildix/whoteld_manager_custom.conf: PostponeRE=true
Documentation about custom config parameters: https://confluence.wildix.com/x/0AiIAQ Custom config parameters List
[WMS-12379] - sys: fixed an issue of PBX engine crash in some rare cases
[FXX-3] - dev: Daysaver stops to send sms via cnats connectionfixed an issue in which DaySaver occasionally stopped sending SMS until rebooted
New Firmwares
New firmwares: WP480GR2: v. 55.145.6.114 WP480GR3: v. 63.145.10.36 WP490GR3: v. 67.145.8.106
[WP-71] - dev: fixed an issue of an incorrect time on WP phones provisioned to HW/ VM PBX in case the phone had a static IP address and PBX was used as NTP server
WMS Beta Hotfix Date: 18.10.2021
Additional packages: wldix-cw-5.03.20211012.1
Fix
[WMS-12263] - sys: fixed an issue of call drop in Collaboration and no media on WP which occurred when Collaboration user, being on a call with WP phone user, turned on personal call recording after completion of attended transfer under the following conditions:
- The system was upgraded to WMS 5.03
- g729 transcoding was enabled in /etc/callweaver/sip.conf
WMS Beta Hotfix Date: 12.10.2021
Additional packages: wldix-cw-5.03.20211012.1
Fix
[WMS-12317] - classound: fixed a rare one-way audio issue on CLASSOUND calls, which occurred due to incorrect processing of RTP Keep Alive by a remote carrier
WMS Beta Hotfix Date: 01.10.2021
Additional packages: ca-certificates_20200930, x-caracal_5.03.20210929.1, wildix-cw-5.03.20210930.1, sipproxy_5.3.6-5.03.20211001.1
Fixes
[WMS-12270] - x-ca: fixed an issue in which Agent information was duplicated in x-caracal Agent reports if the Call group strategy was Call All 32
[WMS-12291] - sys: updated the SSL certificate to ensure correct work of Wildix services
WMS Beta 5.03.20210927.4 Date: 27.09.2021
Improvements
[WMS-10957] - wms: updated API documentation in WMS to include all the available API endpoints
...
If you delete the variable, the option won’t be disabled.
Fixes
[WMS-12216] - sys: fixed an issue in which the option 6) Reset network settings in WMS -> Terminal -> console menu failed to be completed successfully
New Firmware
New WorkForce firmware v 65.145.6.15
...
[WP-148] - dev: fixed an issue in which microphone volume on WorkForce got much higher after WMS upgrade to 5.03
WMS Beta Hotfix Date: 15.09.2021
Additional packages: wildix-provision_5.03.20210915.1, wildix-lua-base_5.03.20210915.1, wildix-dialplan_5.03.20210915.1, wildix-cw-5.03.20210915.1, wms-wildixair-firmwares_5.03.20210914.1
Improvement
[WMS-11941] - sys: improved the work of the ACL rule Cannot - See call recordings, preventing call recordings to be sent to user’s email in case SMTP client is configured on the PBX
Fixes
[WMS-12139] - sys: fixed an issue when in some cases firmware update of W-AIR handsets failed after the PBX was upgraded from WMS version 5.02 to 5.03
...
WMS Beta 5.03.20210910.1 Date: 10.09.2021
Fixes
[WMS-11233] - wms: fixed an issue in which the Call group notifications manager received a false missed call notification if a member of the Call group parked a call
...
[WMS-12020] - dev: fixed an issue in which W-AIR Headset couldn’t update its firmware after upgrade to Beta 5.03.20210721.4
WMS Beta 5.03.20210826.1 Date: 26.08.2021
Improvement
[WMS-11821] - wms: added possibility to activate x-caracal on a Virtual PBX
...
Learn more in x-caracal documentation: https://confluence.wildix.com/x/FAEzBQx-caracal documentation
WMS Beta 5.03.20210825.1 Date: 25.08.2021
Improvement
[WMS-11753] - sys: made the SMS service enabled by default for US/ Canada users after WMS upgrade to v. 5.03
...
- There is an active CLASSOUND license
- The country code is USA in WMS Settings -> PBX -> Language & region
Fix
[FXX-5] - dev: fixed an issue in which a device connected to FXS r3 didn’t get a busy tone when a caller ended a call
The issue affected FXS r3 gateways with firmware versions 27.81.10.15, 27.81.10.16, 27.19.10.15, 27.19.10.16.
WMS Beta 5.03.20210820.1 Date: 20.08.2021
Fix
[WMS-11959] - col: fixed an issue with CDR-View showing only records of the current user
- Issue introduced in WMS 5.03.20210818.1 (Beta)
WMS Beta 5.03.20210818.1 Date: 19.08.2021
New Feature
[WMS-11767] - wms: added ACL rule “Can/ cannot - See call recordings”, which adds a possibility to restrict users from accessing call recordings
...
- For the ACL to work correctly, make sure there is no email indicated in the Dialplan application Record call.
- In case the SMTP client is configured on the PBX, call recordings will be sent to the relevant user’s email, if their email is indicated in the system.
- Call recordings, which already existed in CDR-View, will not be hidden after applying the ACL “cannot - See call recordings”. As a workaround, you can rebase the local CDR-View database to restrict user access to old call records.
Improvements
[WMS-11872] - x-ca: added possibility to integrate custom HTML code to x-caracal using Google Tag Manager
...
Automatic removal of contacts applies, in case the option “Remove existing contacts which are not received from the backend“ is enabled. This improvement can be useful on big installations, where users are imported from an external source, and dummy (virtual) users with service licenses (e.g. part orbits, group managers, etc.) are created and kept locally.
Fixes
[WMS-11824] - sys: fixed an issue in which email addresses containing a hyphen (-) could not be saved correctly in the Dialplan application Go to voicemail
...
[WMS-11882] - sys: fixed an issue when in some rare cases users on PBXs with WMS 5.02 version couldn’t see registered devices in Collaboration
New Firmwares
New W-AIR firmware version 530b4
...
WMS Beta 5.03.20210813.1 Date: 17.08.2021
Improvements
[WMS-11768] - wms: added an option that overrides the timeout between calls in Call All 10/32 Call group strategy and sends an incoming call to a user as soon as they become available
...
Note: RTP multicast works only as long as the PBX and the devices are in the same network.
Fixes
[WMS-11556] - wms: fixed an issue when in some cases tags and recordings were not available in CDR-View for calls routed via Callback
...
Issue introduced in WMS 5.03.20210607.2 (Beta)
WMS Beta 5.03.20210806.2 Date: 10.08.2021
New Feature
[WMS-11561] - col: made Collaboration user interface available in the Portuguese language
Improvement
[WMS-11828] - dev: added possibility to centrally enable LLDP for WP phones
...
[WMS-11839] - col: made it possible to use letters in Postal Code when creating/ editing Phonebook contacts in Collaboration
Fixes
[WMS-11191] - sys: fixed an issue when an outbound call didn’t overflow to consecutive trunks configured in a trunk group
...
[WMS-11770] - sys: fixed an issue with continuous increase of XMPP Server memory usage in case of heavy workload
New Firmwares
New firmwares for WorkForce v 65.145.6.11 WP480GR3: v 63.145.10.34 WP490GR3: v 67.145.8.104 WelcomeConsole: v 68.145.2.39
...
New FXO/ FXS r3 firmware v 27811016_0716
[WMS-11206] - dev: fixed an issue in which during a conversation on analogue phones, connected to W24FXS r3 gateway, users occasionally got unnecessary transferred calls
[FXX-2] - dev: fixed an issue when FXO/ FXS r3 gateways sent media to wrong endpoint after the transfer, if SDES-SRTP was enabled and the call was answered by the PBX
[FXX-4] - dev: added support for direct SDES-SRTP on W02FXSR3 and W04FXSR3 devices
Added possibility to disable the option for W02/04FXS/ W04FXO r3 via custom provisioning parameter: SRTPForceUse =yes|no (option is enabled by default).
Additional sections for the parameter SRTPForceUse were added: [wildixfxo3] and [wildixfxs2]. Documentation will be updated soon: https://confluence.wildix.com/x/KQg8AQ
WMS Beta 5.03.20210730.1 Date: 3.08.2021
Improvement
[WMS-11766] - wms: added possibility to automatically assign user to PBX in a WMS network by mapping PBX name to a field within user import from LDAP
You can now find a new field called PBX in the Map section of the Import screen. Check it off in case you want to automatically add users to the relevant PBXs.
Fix
[WMS-11456] - sys: fixed an issue with old generation phones when there was no audio after semi-attended transfer of an external call to a user with 2 registered devices
WMS Beta 5.03.20210729.2 Date: 30.07.2021
New Feature
[WMS-11241] - wms: added support for Microsoft 365 phonebook sync
...
- Access WMS -> go to Dialplan -> General Settings
- In the Set dialplan variables field, insert the following variable: GLOBAL_PHONEBOOK_SEARCH=yes
- Click Save to apply the changes
Improvement
[WMS-11634] - wms: added possibility to activate x-caracal in WMS after purchasing the relevant service on WMP
...
- x-caracal service can be purchased on VM/HW Server PBX, but you can only activate it on Cloud Client PBX
Fixes
[WMS-11598] - sys: fixed an issue when Collaboration and Wallboard lost connection to the PBX in case of multiple connections through a single user
...
WMS Beta 5.03.20210721.4 Date: 28.07.2021
Improvement
[WMS-11173] - dev: added support for direct SDES-SRTP on W04FXO r3
New firmware v 27811016.
Fixes
[WMS-11381] - sys: fixed an issue with PBX engine memory consumption spike that led to impossibility to make calls
...
[WMS-11742] - sys: fixed an issue with Call group member who set DND/ Away user status being retrieved from pause after PBX engine restart
New Firmwares
New W-AIR firmware version 0530b2
...
WMS Beta 5.03.20210721.3 Date: 21.07.2021
Fixes
[WMS-8131] - sys: fixed an issue where in some rare cases a voicemail received from another user could end up in a hidden voicemail folder
...
Issue introduced in WMS beta 5.03.20210715.1
WMS Beta 5.03.20210715.1 Date: 16.07.2021
Improvement
[WMS-11283] - dev: enabled by default direct SDES-SRTP on Start phones
Fixes
[WMS-11204] - sys: fixed no audio issue if a call received from a SIP trunk was transferred to a WP phone
...
[WMS-11633] - sys: fixed an issue in which it was impossible to complete a transfer of a call placed via Peoplefone trunk
New Firmwares
New firmwares for Workforce v 65.145.4.27, WelcomeConsole v 68.145.2.38, WP480R3 v 63.145.10.33, WP490R3 v 67.145.8.103
...
[WP-72] - dev: fixed poor audio quality issue on WorkForce with firmware v 65.145.6.8
WMS Beta 5.03.20210709.3 Date: 13.07.2021
Improvements
[WMS-10979] - col: added possibility to disable chats in Collaboration
...
If the available storage is less than 1 Gb after reaching 95-100% of total free space, cleaning tasks are launched.
Fixes
[WMS-11236] - sys: fixed no media/ one way audio issue on a caller side after 5 minutes for calls placed via a SIP trunk with enabled SDES-SRTP
...
WMS Beta 5.03.20210705.1 Date: 06.07.2021
Improvement
[WMS-11345] - sys: German language is now used for sounds playback for calls through Swiss and Austrian trunks
Fix
[WMS-8953] - wms: fixed an issue in which restart of ejabberd service after getting a new certificate could lead to Collaboration reconnection and temporary service unavailability
WMS Beta 5.03.20210701.2 Date: 01.07.2021
Improvement
[WMS-11268] - sys: added a new provisioning custom parameter that allows increasing timeout for storing PIN for Voicemail menu on WP phone
...
Once the set timeout is reached out, a user needs to re-enter PIN code
Fixes
[WMS-9207] - wms: fixed an issue in which it was impossible to expand Dialplan included procedures list after collapsing it without selecting any procedure
...
2. Added ACL "Can/cannot use CDR-View" check If a user has ACL "Cannot use CDR-View", there is no access to x-caracal.
Improvements
[WMS-9769] - api: implemented API Trunks Price
...
[WMS-11187] - multiple security fixes
Fixes
[WMS-10096] - dev: fixed an issue with vlan and syslog settings being not applied for FXO/ FXS r3 media gateways
...
WMS Beta 5.03.20210609.1 Date: 10.06.2021
Fixes
[WMS-10819] - int: fixed an issue with impossibility to print documents using Fax Printer on Windows/ macOS
[WMS-11393] - wms: fixed an issue with internal server error appearing on API endpoints requests that used middlewareLogicalOr with alloForAdmin authorization
WMS Beta 5.03.20210607.2 Date: 08.06.2021
Improvements
[WMS-11199] - col: added support for the Basque language in GUI
...
According to the new logic, W-AIR devices are updated gradually: first - bases, then - handsets/headset (previously, they were updated at the same time).
Fixes
[WMS-11125] - wms: fixed an issue with "Announce date, time and caller phone number for Voicemail messages" option not working in WMS 5.02
...
WMS Beta 5.03.20210601.2 Date: 01.06.2021
Improvement
[WMS-11193] - wms: renamed Wizyconf license to Wizyconf room
...
- User preferences menu
- Activation / Licenses menu
Fixes
[WMS-10556] - col: fixed an issue with Auto adjust mic option being active even if it was disabled in Web Phone settings
...
WMS Beta 5.03.20210524.1 Date: 25.05.2021
New Feature
[WMS-10805] - wms: added support for calendar sync with Office 365
...
- Go to WMS -> Users -> Import and import users from Office 365
- Go to WMS Settings -> PBX -> Integrations -> Office365 Integration and click Enable -> allow access to the application
Improvements
[WMS-11216] - x-ca: x-caracal improvements:
...
[WMS-11143] - sys: added rules to restart x-caracal if the service is down
Fixes
[WMS-10942] - col: fixed an issue in which call recordings for calls answered via mobility were not displayed in Collaboration history
...
[WMS-11255] - web: fixed an issue with wrong default value of "Use DST" parameter for WP phones
New Firmwares
New firmwares for WP480R3 v 63.145.10.32, WelcomeConsole v 68.145.2.37, WP490R3 v 67.145.8.102
...
WMS Beta 5.03.20210519.1 Date: 19.05.2021
Fixes
[WMS-11234] - wms: fixed an issue with AppStore mobile image being broken in Welcome Message
[WMS-11264] - sys: fixed an issue in which Call Group members were paused after Presence server/ PBX restart if "Unavailable on Away/DND" option was disabled
WMS Beta 5.03.20210518.1 Date: 18.05.2021
Fix
[WMS-11220] - wms: fixed an issue with impossibility to access Collaboration via Google Chrome v 91 if:
- user logged in to Collaboration for the first time
- a new browser/ PC was used
- cache was cleaned in the current browser
- Collaboration was opened in a new incognito tab
New Firmware
New firmware for WorkForce v 65.145.6.8
...
[WP-39] - dev: fixed an issue with WorkForce freezing while using Jabra Engage 65 connected via USB
WMS Beta Hotfix Date: 14.05.2021
Additional packages: wildix-cw-5.03.20210514.1, wildix-base_5.03.20210513.1~584f7348_all.deb
Fixes
[WMS-10966] - sys: fixed an issue in which some applications were broadcasting error logs to all opened consoles
[WMS-11242] - sys: fixed an issue in which under rare conditions it was impossible to receive/ make calls, after wms release 5.02.20210416.1
WMS Beta 5.03.20210513.2 Date: 13.05.2021
Improvement
[WMS-11086] - x-ca: x-caracal improvements and fixes
...
[WMS-10810] - sys: updated cored debian packages of the PBX to the latest version (including php of the web server, linux-kernel and many other dependencies and libraries)
Fixes
[WMS-8500] - sys: fixed an issue in which call information could be lost under high load for Zoho CRM integration
...
[WMS-11117] - sys: fixed an issue with ACL permissions being not checked when using simplified mail2fax method
WMS Beta 5.03.20210429.1 Date: 29.04.2021
Improvement
[WMS-10553] - wms: improved CSRF protection
Fixes
[WMS-10818] - col: fixed an issue when it was impossible to start screen sharing for the second time during one call
...
[WMS-11051] - sys: fixed an issue with G729 transcoding not working for outgoing calls from Collaboration
WMS Beta 5.03.20210421.2 Date: 26.04.2021
New Features
...
- To enable, edit the config file /rw2/etc/env.ini (or custom /rw2/etc/env.custom.ini for persistence) by setting the parameter CALL_CONTROL_FEATURE=true
- When logging in to Collaboration under remote desktop, tick off "Call Control only"
Improvements
[WMS-7761] - col: added support for the US standard date format "mm/dd/yyyy" in CDR-View
...
- To enable, modify Dialplan procedure used for the group -> add Set application and insert a variable CG_MANAGER_MAIL_NOTIFY=yes
Fixes
[WMS-9968] - col: fixed an issue when it was impossible to share screen to more than one user in Collaboration
...
[WMS-10909] - dev: fixed an issue with WP phones R3/4 being not automatically upgraded when network connection was slow
New Firmware
[WMS-10767] - dev: new W-AIR firmware version 0530b1:
...
Additional packages: wildix-base 5.02.20210420.1 wildix-lua-base 5.02.20210420.1 wildix-dialplan 5.02.20210420.1 wildix-provision 5.02.20210420.1 x-caracal_5.02.20210420.2
Fix
[WMS-10849] - sys: fixed an issue with impossibility to configure BLF keys if they started with extension numbers of monitored users
New Feature
[WMS-10656] - col: added support for x-caracal
For activation, refer to the document: https://confluence.wildix.com/x/FAEzBQ.x-caracal documentation
WMS Beta 5.02.20210416.1 Date: 19.04.2021
Fix
[WMS-10931] - wms: fixed an issue with incorrect URL mapping for admin users that caused redirection to Collaboration after opening some menus under WMS Settings
WMS Beta Hotfix Date: 15.04.2021
Additional packages: wildix-cw-5.02.20210415.1, sipproxy_5.3.6-5.02.20210414.1, wildix-provision_5.02.20210413.1, wildix-dialplan_5.02.20210413.1, wildix-lua-base_5.02.20210413.1, wms-wildixair-firmwares_5.02.20210414.1
Fixes
[WMS-8663] - sys: fixed an issue in which a Call Group member stopped receiving CG calls if Force Call Forward was enabled to an external number and answered from that number
...
[WMS-10959] - sys: fixed an issue in which SIP Proxy couldn't start in some rare conditions on Cloud PBXs under small installations
New Firmware
W-AIR Headset firmware v 0305_b054
...
WMS Beta 5.02.20210409.1 Date: 12.04.2021
Improvement
[WMS-10872] - wms: added a warning message showing license overuse while creating, editing or importing users
Fixes
[WMS-10763] - sys: fixed an issue with negative talk time and wrong status in CDR-View for blind transferred outgoing calls
...
WMS Beta 5.02.20210402.1 Date: 2.04.2021
Fixes
[WMS-9937] - sys: fixed an issue with incorrect behavior of TAPI driver when extra events were created in case of call transfers
...
Additional packages: wildix-cw-5.02.20210326.1 wildix-provision_5.02.20210329.1 wildix-dialplan_5.02.20210329.1 wildix-lua-base_5.02.20210329.1 wms-wildix2-firmwares_5.02.20210329.2
Improvement
[WMS-10812] - wms: added possibility to continue recording of an outgoing call after it was transferred to another user
- The feature is disabled by default. To enable it, add set variable
RECORD_ON_CALLEE_SIDE=true in Dialplan - Current limitation: Direct RTP must be disabled. To disable it, edit the config file /etc/callweaver/sip-general-custom.conf and add direct_rtp=no parameter
New Firmware
New WorkForce firmware v 65.145.4.20
...
WMS Beta 5.02.20210319.1 Date: 22.03.2021
Fixes
[WMS-9952] - col: fixed an issue with impossibility to export charts in CDR-View
...
WMS Beta 5.02.20210315.1 Date: 17.03.2021
Improvement
[WMS-7872] - dev: added possibility to set image refresh button for 2N intercom integration
...
- Custom application -> SIPAddHeader(Alert-Info: infro=doorbell:*120)
- Custom application -> SIPAddHeader(Call-Info: icon="<http://10.100.4.133/api/camera/snapshot?width=160&height=120&source=internal&pic=cam.jpg>"), where 10.100.4.133 – IP address of the intercom
- Dial the phone -> call destination for answering calls from a doorphone (you can specify your own destination: an extension, several extensions, a call group…)
Updated documentation https://confluence.wildix.com/x/qADwAQ.documentation Integration of 2N intercom Helios IP with Wildix
W-AIR firmware version 0520b1 for W-AIR Base Sync Plus, W-AIR Base, W-AIR Base, Small Business, W-AIR Basic, W-AIR LifeSaver, W-AIR Med, W-AIR Office
Fixes
[WMS-10603] - col: fixed an issue in which current versions of some extensions in Collaboration Settings were not updated to the latest version
...
WMS Beta 5.02.20210311.1 Date: 11.03.2021
Fixes
[WMS-10742] - sys: fixed an issue with an option "Play" being inaccessible from Voicemail menu for shared voicemails on WP phones
...
WMS Beta 5.02.20210309.1 Date: 10.03.2021
Fixes
[WMS-10400] - wms: fixed an issue with no audio stream from PBX to remote WP phone on incoming calls that were handled via IVR menu and routed to a Call group
...
WMS Beta 5.02.20210305.2 Date: 5.03.2021
Improvement
[WMS-10424] - col: notifications about availability of new versions are now not shown for WIService and other integrations with enabled auto-update option
Fix
[WMS-10693] - dev: fixed an issue when it was impossible to pick up a call by pressing a BLF key for users with an ACL rule "Cannot - View calls of users"
WMS Beta 5.02.20210226.1 Date: 26.02.2021
Fix
[WMS-10470] - wms: fixed an issue with user status being changed for those users who answered a call via mobility and had no active devices
WMS Beta 5.02.20210222.1 Date: 23.02.2021
Improvement
[WMS-10663] - col: added lazy (deferred) loading of images in Collaboration to reduce unnecessary network load
...
Note |
---|
This version is the Stable Release Candidate. Starting from March 01 each region/ country will gradually get access to WMS 5.02 Stable upgrade, the schedule will be announced later. Repository to upgrade: rel50rc. The full list of tickets: WMS Stable Changelog rel50. |
Fixes
[WMS-10514] - sys: fixed an issue with SIP Proxy periodic restart
...
[WMS-10646] - sys: fixed an issue with impossibility to provision W-AIR bases after upgrade to WMS v.5.02.20210217.2
New Firmwares
New firmwares for WP410R2 v. 50.145.6.174, WP480GR3 v. 63.145.10.31, Workforce v. 65.145.4.18, WP490GR3 67.145.8.101, WelcomeConsole 68.145.2.35
...
Additional packages: wildix-provision 5.02.20210219.1 wildix-dialplan 5.02.20210219.1 wildix-lua 5.02.20210219.1
Fix
[WMS-10646] - sys: fixed an issue with impossibility to provision W-AIR bases after upgrade to WMS v.5.02.20210217.2
WMS Beta 5.02.20210217.2 Date: 18.02.2021
Improvement
[WMS-10385] - wms: optimized PHP worker memory limit
Fixes
[WMS-9548] - sys: fixed a problem with outgoing calls being dropped with certain trunk providers
...
WMS Beta 5.02.20210211.1 Date: 12.02.2021
Fixes
[WMS-10478] - col: fixed an issue with cyclic fetch of phonebook avatars after receiving an error (e.g. unavailable user on remote PBX)
...
WMS Beta 5.02.20210208.1 Date: 9.02.2021
Fixes
[WMS-10262] - wms: fixed an issue when it was impossible to re-save Dialplan procedure after adding "Voicemail access" application
...
[WMS-10529] - sys: fixed an issue with impossibility to update W-AIR firmware after upgrading PBX to WMS v. 5.02.20210127.1
New Firmware
[WP-36] - dev: new firmware for WorkForce v. 65.145.4.18 includes fixes:
...
WMS Beta 5.02.20210205.1 Date: 6.02.2021
Fix
[WMS-10570] - col: fixed an issue with CDR-View not working after the upgrade to WMS Beta 5.02.20210203.2
WMS Beta 5.02.20210203.2 Date: 3.02.2021
Improvement
[WMS-10101] - col: implemented the new logic for extensions update in Collaboration Settings -> Extensions: now new versions are obtained directly from Collaboration, regardless of updating WMS version
...
WMS Stable Release Candidate 5.02.20210201.4 Hotfix Date: 2.02.2021
Additional package: wms-wildix2-firmwares 5.02.20210202.1
Fix
[WMS-10540] - sys: fixed an issue with delivery of wrong versions of firmwares for WP phones
WMS Stable Release Candidate 5.02.20210201.4 Date: 1.02.2021
Note |
---|
This version is the Stable Release Candidate. Starting from March 01 each region/ country will gradually get access to WMS 5.02 Stable upgrade, the schedule will be announced later. Repository to upgrade: rel50rc. |
...
- the option "Set conference password" is available while creating or editing a conference, available also for dial-in numbers and Wizyconf Station
- 2 passwords are generated automatically: 1 - for a web conference, 2 - for dial-in numbers and Wizyconf Station
- for a web conference access, a password length is from 6 to 10 symbols, including numbers, upper and lower case letters; for dial-in and Wizyconf Station access, password consists of 6 numbers
- a conference moderator can edit a password for a web conference; password for access via dial-in numbers and Wizyconf Station cannot be edited
- both passwords are sent in a conference invitation (you can also view them while editing a conference)
- conferences protected with a password are marked with a safety icon
Documentation: Wizyconf Videoconference - User Guide WMS 5, Wizyconf Station Quick Start Guide.
...
Note: Stereo mode can be activated separately on any PBX, without the integration.
Fixes
[WMS-10313] - wms: fixed an issue with tooltip indicating trunk registration status being not displayed when hovering over a specific trunk in WMS -> Trunks
...
[WMS-10646] - sys: fixed an issue with impossibility to provision W-AIR bases after upgrade to WMS v.5.02.20210217.2
New Firmwares
New firmwares for WP410R2 v. 50.145.6.174, WP480GR3 v. 63.145.10.31, Workforce v. 65.145.4.18, WP490GR3 67.145.8.101, WelcomeConsole 68.145.2.35
...
WMS Beta 5.02.20210127.1 Date: 27.01.2021
Improvement
[WMS-10447] - wms: fixed security vulnerability issue with cross-site scripting (XSS) attacks
Fix
[WMS-10458] - sys: fixed an issue with TTS not working with Dialplan applications Play sound and Dial by name in some cases
WMS Beta 5.02.20210112.1 Date: 22.01.2021
Additional packages: wildix-cw 5.02.20210120.2 rtpengine 8.3.1-5.02.20210120.1wildix-lua-base 5.02.20210119.1 wildix dialplan 5.02.20210119.1 wildix-provision 5.02.20210119.1
Fixes
[WMS-10355] - sys: fixed an issue in which calls dropped after 10 minutes due to missing Session-Expires Timer in UPDATE messages by adding a custom parameter session_expire_header_in_update
...
WMS Beta 5.02.20210112.1 Date: 18.01.2021
Additional packages: wildix-cw 5.02.20210115.1 sipproxy 5.3.6-5.02.20210115.1 wildix-lua-base 5.02.20210115.1 wildix dialplan 5.02.20210115.1 wildix-provision 5.02.20210115.1
Fix
[WMS-10397] - sys: fixed an issue with impossibility to provision devices on newly created Cloud PBXs
WMS Beta 5.02.20210112.1 Date: 14.01.2021
Fix
[WMS-10359] - col: fixed an issue with Function keys being not displayed in Collaboration if "Voicemail" Function key was configured for deleted user after upgrade to WMS 5.02
WMS Beta 5.02.20210106.3 Date: 11.01.2021
Improvement
[WMS-10339] - sys: added parameter allowing WelcomeConsole/ WP490 users with configured BLF “Colleague” not to receive updates for status changes of “call all 10/ 32” call groups members
...
It can be changed in /etc/kamailio/cfg.d/host_specific_custom.cfg.
Fixes
[WMS-10215] - sys: fixed an issue with no audio for 10 seconds after answering a call from BRI/ PRI gateway and transferring it to user with mobility
...
[WMS-10380] - sys: fixed an issue with no audio/ one way audio for calls answered by the pbx (e.g. ivr or dialplan rule), which involved a device that doesn’t support “refer” (fxo/ fxs gateway)
WMS Beta Hotfix Date: 04.01.2021
Additional package: wildix-rtpengine 8.3.1-5.02.20201231.1
Fix
[WMS-10377] - sys: fixed a problem with one way audio in some cases after turning on call recording in WMS beta 5.02.20201228.4
WMS Beta 5.02.20201228.4 Date: 29.12.2020
New Firmwares
New firmwares for WP480 r3 v. 63.145.10.30, WP490 r3 67.145.8.100, WorkForce v. 65.145.4.12, WelcomeConsole v. 68.145.2.33
...
Documentation already available:
- End-user brochure: https://confluence.wildix.com/x/lQOIAQ
- QIG: https://confluence.wildix.com/x/Ygo8AQ
- Datasheet: Wildix VoIP Phones and Accessories - End User Brochures
- QIG: Phones Accessories Quick Start Guide
- Datasheet: Phones Accessories Datasheet https://confluence.wildix.com/x/qwDzAw
...
WMS Beta 5.02.20201228.4 Date: 28.12.2020
Improvement
[WMS-9862] - wms: added auto refresh of licenses on pbxs from wmp
Fixes
[WMS-10190] - sys: fixed an issue in which system call recording stopped after call was answered via mobility
...
WMS Beta 5.02.20201223.1 Date: 24.12.2020
Improvement
[WMS-10079] - app: TAPI driver v. 1.2.4 adds possibility of silent installation and provides msi package
...
- for .exe files: "C:\Program Files (x86)\Wildix\WildixTSP\uninst.exe" /S
- for msi packages: msiexec /x WildixTAPI-1.4.1.x64.msi /qn Documentation: https://confluence.wildix.com/x/YgOIAQ
[WMS-10186] - sys: added option to enable SDES-SRTP for SIP trunks
The option is configured under SIP trunk settings menu in WMS -> Trunks.
Fix
[WMS-9502] - sys: fixed an issue in which recording of an incoming call started via Diaplan stopped after being transferred to a mobile number
...
WMS Beta 5.02.20201218.1 Date: 22.12.2020
Improvement
[WMS-10232] - wms: increased the max number of characters recognised by TTS service up to 800
Fix
[WMS-9791] - sys: fixed an issue with DTMF tones not working for an outgoing call via BRI/ PRI media gateways
WMS Beta 5.02.20201217.2 Date: 18.12.2020
Fix
[WMS-10247] - sys: fixed an issue in which WebAPI integration stopped working after upgrade to WMS v. 5.02.20201015.2 due to the new version of JS library
...
WMS Beta 5.02.20201217.1 Date: 17.12.2020
Fixes
[WMS-9323] - sys: fixed an issue in which return from semi-attended transfer didn't work in Collaboration if a transferee refused a call
...
WMS Beta 5.02.20201215.1 Date: 16.12.2020
Improvement
[WMS-10078] - col: improved Outlook integration: the option "Enable calendar sync" is now disabled by default for new users
Fix
[WMS-8692] - sys: fixed one way audio issue after resuming a call on hold that lasted > 11 min
WMS Beta 5.02.20201210.1 Date: 15.12.2020
Additional packages: wildix-cw 5.02.20201214.2 wildix-provision 5.02.20201215.1 wildix-dialplan 5.02.20201215.1 wildix-lua 5.02.20201215.1
Fix
[WMS-10200], [WMS-10214] - sys: fixed an issue when incoming calls from a trunk dropped after transfer in case of customized Contact Header
WMS Beta 5.02.20201210.1 Date: 14.12.2020
Additional package: wildix-cw 5.02.20201214.1
Fix
[WMS-8502] - sys: fixed an issue in which a call placed to a Call group couldn't be transferred from Collaboration if a caller had mobility feature enabled
WMS Beta 5.02.20201210.1 Date: 11.12.2020
Fix
[WMS-10087] - wms: fixed an issue with poor audio quality after attendant transfer of a call placed to a Call group that contained "queue() rule and c flag" in Dialplan
WMS Beta Hotfix Date: 10.12.2020
Additional package: wildix-sipproxy 5.3.6-5.02.20201210.1
Fix
[WMS-10265] - sys: fixed an issue in which calls via German VoIP operator Deutsche Telekom SIP Anlagenanschlußoperator dropped while being transferred
WMS Beta 5.02.20201207.3 Date: 7.12.2020
New Features
...
- For this feature, the firmware from WMS-9873 is required
- Documentation: https://confluence.wildix.com/x/UoPPBHow to get location of W-AIR Base Station in case of emergency alarm
[WMS-10027] - col: added support for Wizywebinar in Collaboration
Quick Start Guide: https://confluence.wildix.com/x/W4PPBDocumentation: Wizywebinar User Guide
[WMS-10048] - wms: added possibility to enable reporting of user statutes for external calls
...
2. Set language En or En-us in Dialplan procedure used for managing external calls
Improvement
[WMS-10157] - sys: enabled by default weekly automatic upgrade for the Stable repository
...
- For PBXs with previously enabled auto-upgrade, there are no changes
- Auto-upgrade can be disabled once the upgrade is completed. But it will be enabled by default again after each new upgrade
Fixes
[WMS-9571] - wms: fixed an issue in which Popup URLs couldn't get call tags
...
[WMS-10211] - sys: fixed an issue in which devices couldn't subscribe via SIP in Failover mode
New Firmware
New W-AIR firmware version 0501b5
...
WMS Beta 5.02.20201130.3 Date: 30.11.2020
Improvement
[WMS-10158] - sys: enabled by default SDES-SRTP for WP410 r2
Fixes
[WMS-10153] - sys: fixed an issue in which connection for Callback URL requests was established via TLS v 1.0 instead of v. 1.2
...
WMS Beta 5.02.20201124.1 Date: 25.11.2020
Fixes
[WMS-9658] - sys: fixed an issue with Google login not working for users import
...
WMS Beta 5.02.20201118.1 Date: 19.11.2020
Improvement
[WMS-9987] - app: WIService v. 3.1.2 (Windows) includes:
- Added auto update option for .exe files
- to enable the option, make sure the box "Keep Wildix Integration Service up to date" is ticked when completing WIService setup
- Windows Task Scheduler checks for updates every day at 01:00-06:00 or after starting PC. If a new version is available, it downloads a new installation package and runs it in silent mode
- to disable auto update, click on WIService icon in Quick Launch Toolbar -> go to "Settings" and untick
Documentation: https://confluence.wildix.com/x/EgAeAg What is WIService
- Fixed an issue with impossibility to generate a call using click2call feature in Firefox browser (fix for both .exe files and .msi packages)
Fixes
[WMS-8220] - wms: fixed an issue with analog ports being ordered incorrectly in WMS -> Devices
...
WMS Beta Hotfix Date: 18.11.2020
Additional packages: wildix-provision wildix-dialplan wildix-lua-base 5.02.20201118.1
Fix
[WMS-10162] - sys: fixed an issue in which WP4X0 r3, WelcomeConsole and WorkForce couldn't be auto-provisioned after upgrade to WMS Beta v. 5.02.20201116.5
WMS Beta 5.02.20201116.5 Date: 16.11.2020
New Feature
[WMS-9865] - sys: implemented call group notification manager feature for Collaboration (ref. ticket for the initial implementation WMS-6761)
...
- Add a BLF key "Voicemail" and subscribe for a dedicated user who serves as a CG notification manager (check the documentation https://confluence.wildix.com/x/BAA8AQ for the instructions and requirements)
- Once there is a missed call or a voicemail, a missed notifications counter is indicated on Fn keys tab and the BLF key "Voicemail"
- To view notifications, mouse over the BLF key and press three dots or right-click to open a list
- Available interactions: select one or multiple notifications, mark as read, play a voicemail, dial a caller, delete
Improvement
[WMS-10036] - wms: increased security requirements for credentials in WMS network: now it is only possible to automatically generate credentials, without manual editing
Warning: admin has to regenerate Server PBX credentials in Settings -> PBX -> WMS network -> click "Generate credentials". After completing, update credentials also for all Client PBXs in WMS Network. If credentials are not updated, WMS Network will stop working starting from WMS v. 5.03.
Fixes
[WMS-9897] - sys: fixed an issue in which all users couldn't use Collaboration at the same time because PBX didn't accept connections
...
[WMS-10033] - sys: fixed an issue with incorrect display of presence statuses for monitored users on WelcomeConsole with a large amount of configured BLF keys (> 50)
New Firmwares
New firmwares for WP480 r3 v. 63.145.10.24, WP490 r3 67.145.8.96, WorkForce v. 65.145.4.3, WelcomeConsole v. 68.145.2.31
...
[WP-23] - dev: fixed an issue with sidetone feature not working on WorkForce
WMS Beta 5.02.20201112.4 Date: 12.11.2020
Improvement
[WMS-9978] - dev: added a new parameter "Obtain FSK CID from" for W04FXO r3 media gateway settings to display correct Caller ID
...
Note: After updating your PBX, you need to re-save W04FXO r3 settings in WMS -> Trunks.
Fixes
[WMS-10001] - app: WIService v. 3.0.11 (Windows) fixes an issue in which a security permission notification was displayed for another user after switching accounts
...
WMS Beta 5.02.20201109.1 Date: 09.11.2020
New Feature
[WMS-9012] - sys: added support for W-AIR Small Business Base R2 (available in early 2021)
Documentation: W-AIR Small Business - Admin Guide, W-AIR System Datasheet
Improvement
[WMS-9965] - sys: implemented per-user license check: only users with Premium licenses can now manage Call groups via WebAPI Wallboard
Fixes
[WMS-9668] - sys: fixed an issue with DTMF not working after resuming a call from hold if a caller's VoIP operator sent DTMF tones via payload type 96
...
WMS Beta 5.02.20201103.1 Date: 03.11.2020
Improvement
[WMS-10042] - app: WiService v. 3.0.10 (macOS) includes fixes:
- an issue with high CPU utilization
- an issue with missing data (calls, periods etc) in CDR-View
Fixes
[WMS-9983] - dev: fixed an issue with dropped calls due to wrong TCP Keep-Alive value inside W-AIR configuration
...
WMS Beta 5.02.20201029.2 Date: 29.10.2020
Fixes
[WMS-9170] - wms: fixed an issue with impossibility to use 0 as a called number in Diaplan procedures
[WMS-9880] - sys: fixed an issue with PBX engine processing that caused high memory usage
WMS Beta 5.02.20201023.2 Date: 26.10.2020
Improvements
[WMS-9474] - sys: added support for "call through remote pbx" Dialplan application in failover scheme
...
- added config file backup for the integration service
- Integration service stability improvement
Fixes
[WMS-8421] - sys: fixed an issue in which calls from remote PBX to “Identities” extension number did not go through
[WMS-9903] - sys: fixed impossibility to redial from call history for external calls made using “Identities” feature
New Firmware
New W-AIR firmware version 0501b001 for W-AIR Headset
...
WMS Beta Hotfix Date: 20.10.2020
Additional package: sipproxy package 5.3.6-5.02.20201020.1
Fix
[WMS-9973] - sys: fixed shared memory leak in SIP proxy package introduced in WMS v. 5.02.20201015.2 (previous beta)
WMS Beta 5.02.20201015.2 Date: 16.10.2020
New Features
[WMS-6761] - sys: implemented call group notification manager allowing users to subscribe to receive notifications about missed calls and VM notifications for call groups (currently implemented for WP480G 2017 / WP490G 2017/ WelcomeConsole / WorkForce)
- Documentation: https://confluence.wildix.com/x/BAA8AQHow to set up the Call Group notifications manager feature
[WMS-7551] - sys: added support for online streaming of mp3 http/ https sources as music on hold
...
[WMS-8152] - wms: added support for client to server authorization for using API on a PBX (oAuth2)
Note: According to rfc6749 section 4.2
Warning Important! oAuth2 provides a new WebAPI JS library. It is recommended to use it in order to ensure more secure performance of your integrations.
- Download the library:
- from the Wildix website: https://www.wildix.com/webapi/v2/demo/wtapi.tar.gz
- directly from your Wildix PBX using the path: https://{PBX_IP}/public/wtapi.v2.js
Developer's Documentation: https://www.wildix.com/webapi/v2/demo/doc/.
- Download the library:
...
- After implementation, the following sections appear in the code:
after the <HEAD> section
Code Block <!-- Google Tag Manager --> <script>(function(w,d,s,l,i){w[l]=w[l]||[];w[l].push({'gtm.start': new Date().getTime(),event:'gtm.js'});var f=d.getElementsByTagName(s)[0], j=d.createElement(s),dl=l!='dataLayer'?'&l='+l:'';j.async=true;j.src= 'https://www.googletagmanager.com/gtm.js?id='+i+dl;f.parentNode.insertBefore(j,f); })(window,document,'script','dataLayer','GTM-XXXX');</script> <!-- End Google Tag Manager -->
after the <BODY> section:
Code Block <!-- Google Tag Manager (noscript) --> <noscript><iframe src="https://www.googletagmanager.com/ns.html?id=GTM-XXXX" height="0" width="0" style="display:none;visibility:hidden"></iframe></noscript> <!-- End Google Tag Manager (noscript) -->
Improvements
[WMS-6719] - sys: added 03, 030, 0345 prefixes to "National" and 084 prefix to "Premium" call classes for the UK to improve call class recognition and for the correct management of ACL permissions
...
[WMS-9786] - wms: added possibility to set >255 Timetables, Switches and 3 State Switches
Fixes
[WMS-6925] - col: fixed an issue with an original caller name being displayed in CDR-View instead of a modified one for trunk calls if Dialplan application "Set -> Caller name" was used
...
WMS Beta 5.01.20201006.1 Date: 09.10.2020
Additional packages: wildix sipproxy 5.2.5-5.01.20201008.1 wildixfxs2 5.01.20201009.1
Fixes
[WMS-9852] - sys: fixed an issue with incorrect behaviour of presense status monitoring feature on WP phones when BLF keys stopped displaying presence statuses of monitored users
...
WMS Beta 5.01.20201006.1 Date: 07.10.2020
Improvement
[WMS-8043] - sys: enabled by default daily auto upgrade for newly created systems
...
WMS Beta 5.01.20201002.1 Date: 02.10.2020
New Feature
[WMS-6512] - dev: new firmware for WelcomeConsole v. 68.145.2.28
...
2. Added support for LED indication of presence and call statuses on Mono / DuoLED Headsets
Improvement
[WMS-9816] - api: security improvements for Zoho integration
WMS Beta 5.01.20200928.1 Date: 29.09.2020
Fixes
[WMS-8184] - col: fixed an issue with popup notifications being not displayed for BLF key "Call group" with disabled "Audio notification" option
...
[WMS-9847] - sys: fixed one way audio issue after answering a call in Collaboration with enabled mobility
New Firmware
New firmware for W04FXO r3 v. 27811011
...
WMS Beta 5.01.20200925.1 Date: 25.09.2020
Fix
[WMS-9442] - dev: new firmware for WorkForce v. 65.145.4.1:
...
WMS Beta 5.01.20200921.1 Date: 22.09.2020
Improvement
[WMS-9790] - wms: major security fixes
WMS Beta 5.01.20200914.1 Date: 17.09.2020
Additional packages: wildix sipproxy 5.2.5-5.01.20200917.1 ejabberd 19.02-5.01.20200916.1
Fix
[WMS-9612] - sys: fixed no audio issue for calls between 2 PBXs in WMS Network located in 2 different routable LAN networks
WMS Beta 5.01.20200914.1 Date: 14.09.2020
New Feature
[WMS-9727] - col: improvements for customer feedback option in Collaboration
WMS Beta 5.01.20200902.2 Date: 09.09.2020
Additional package: wildix cw package 5.01.20200909.1
Fix
[WMS-9641] - col: fixed an issue with "Conference", "Recording" and "Transfer" buttons being unavailable for calls in Collaboration when calling via Diaplan application "Call through remote PBX"
WMS Beta 5.01.20200902.2 Date: 03.09.2020
Fix
[WMS-9636] - sys: fixed an issue with double authentication when connecting to WebAPI using Chrome browser v. 80 due to disabled support of cross-site cookies
Limitation: the issue still might be present when using Incognito Mode (by default, it blocks third-party cookies). You can change this behaviour (allow all cookies) in chrome://settings/cookies.
Wildix firmware package 5.01.20200721.1 Date: 01.09.2020
New Firmware
New W-AIR firmware version 0501b001 for W-AIR bases and 0501b002 for W-AIR Handsets.
...
WMS Beta 5.01.20200827.1 Date: 28.08.2020
Fix
[WMS-9603] - sys: fixed one way media issue for a callee after answering a call in Collaboration with enabled mobility
WMS Beta 5.01.20200826.1 Date: 26.08.2020
Fix
[WMS-9185] - sys: additional fix for the issue in which WP phones connected to HW/ VM PBX couldn't get firmware after upgrading to WMS 5.0 (initial ticket WMS-9154)
WMS Beta 5.01.20200820.1 Date: 20.08.2020
New Feature
[WMS-9325] - wms: added possibility to access storages and ntp server menus before pbx activation
WMS Beta Hotfix Date: 19.08.2020
Additional packages: sipproxy package 5.2.5-5.01.20200818.1 wildix-base package 5.01.20200818.1
Improvement
[WMS-9462] - sys: performance tuning for 1GB PBX instances in order to prevent lack of memory
WMS Beta Hotfix Date: 18.08.2020
Additional packages: sipproxy package 5.2.5-5.01.20200817.1 wildix-cw package 5.01.20200818.1
Fixes
[WMS-9542] - sys: fixed no video issue from Dahua doorphones after upgrading PBX to WMS 4.04
...
WMS Beta 5.01.20200814.1 Date: 14.08.2020
Fix
[WMS-9519] - sys: fixed an issue with audio in some cases for calls in wms network after upgrade to 4.04
Issue reproduced in case caller used a device provisioned for using wideband codecs but without support for Opus (e.g a W-AIR user on one PBX calling a WP user on another PBX in WMS network)
New Firmware
New firmware for Wp480gr3 v. 63.145.10.22.rom WorkForce v. 65.145.2.15 Wp490gr3 v. 67.145.8.94 WelcomeConsole v. 68.145.2.26
...
Fixed position and changed color of srtp lock icon (from red to green)
WMS Beta Hotfix Date: 12.08.2020
New Firmware
New firmware for WorkForce v. 65.145.2.14.rom
...
WMS Beta 5.01.20200810.3 Date: 11.08.2020
New Feature
[WMS-9539] - col: added support for danish language
Fix
[WMS-9527] - sys: fixed an issue in which automatic sync of devices wasn't performed after pbx upgrade
issue introduced in WMS v. 5.01.20200612.2
WMS Beta Hotfix Date: 4.08.2020
Additional packages: provision package 5.01.20200804.1 dialplan package 5.01.20200804.1 lua-base package 5.01.20200804.1 base package 5.01.20200804.1
Fixes
[WMS-7345] - sys: fixed an issue with outgoing fax queue being blocked after the first unsuccessful attempt
...
WMS Beta 5.01.20200730.1 Date: 31.07.2020
Fix
[WMS-9441] - wms: fixed several Dialplan issues in which:
- Dialplan procedure containing "Jump to if" application was saved incorrectly
- it was impossible to save Dialplan procedure after removing an application that previously contained an error
New Firmware
New firmware for WP480G r3 v. 63.145.10.21, WP490G r3 v. 67.145.8.93, WorkForce v. 65.145.2.10, WelcomeConsole v. 68.145.2.25
[WMS-9419] - dev: fixed an issue in which incoming concurrent calls were routed only to BLF key "Line 1"
Wildix ejabberd package 5.01.20200724.1 Date: 27.07.2020
Fix
[WMS-9384] - sys: fixed an issue with Collaboration freezing under high load
Wildix cw package 5.01.20200724.1 Date: 24.07.2020
Fix
[WMS-9140] - wms: fixed an issue in which a Call group member who changed user status to “DND” while being paused for wrap up time or auto pause on no answer, still received Call group calls
Wildix firmware package 5.01.20200717.1 Date: 20.07.2020
New Firmware
New firmware for WorkForce v. 65.145.2.7
...
WMS Beta 5.01.20200716.1 Date: 17.07.2020
Fixes
[WMS-7932] - wms: fixed an issue in which import of user from active directory failed if email address contained generic top-level domains
...
WMS Beta 5.01.20200625.1 Date: 25.06.2020
Improvement
[WMS-9068] - col: fixed an issue in which user avatars disappeared after zooming in/ out Colleagues page in Collaboration
Fix
[WMS-9285] - wms: fixed an issue with incorrect {rand} parameter being added to "Verify number of calls" and "Trunk Group" Dialplan applications if editing via "Developer" option
WMS Beta 5.01.20200622.1 Date: 23.06.2020
Fixes
[WMS-9183] - wms: fixed an issue when it was impossible to save any changes on FAX/SMS server page if PBX was in WMS network
...
WMS Beta 5.01.20200619.1 Date: 19.06.2020
Fixes
[WMS-8990] - col: increased the max number of CDR-View exported records up to 500 000
...
Note: You won't be able to switch to the previous behaviour https://confluence.wildix.com/x/3oC5Aw
WMS Beta 5.01.20200612.3 Date: 12.06.2020
Fixes
[WMS-9154] - dev: fixed an issue when WP phones connected to HW/ VM PBX couldn't get firmware after upgrading to WMS 5.0
...
WMS Beta 5.01.20200605.6 Date: 09.06.2020
Fix
[WMS-9093] - wms: fixed an issue with impossibility to close device's direct access via "Disconnect" option in WMS -> Devices
WMS Beta 5.01.20200605.5 Date: 05.06.2020
Improvements
[WMS-8849] - col: improved Collaboration top menu design
...
- all devices, except GSM trunks (W01GSM and DaySaver) use TLS transport on VM/ HW PBXs (previously it was supported on Cloud PBXs)
- "Use TLS / SRTP for local devices" option in WMS Settings -> Settings -> PBX -> SIP-RTP is no longer supported and will be deleted from the web the interface later
- use custom provisioning parameter "SIPTransport" (https://confluence.wildix.com/x/KQg8AQ) to set another protocol
Fixes
[WMS-8511] - sys: fixed no audio issue after attended transfer if a transferee belonged to a different subnet
...
WMS Beta 5.01.20200603.2 Date: 03.06.2020
Fixes
[WMS-9066] - col: fixed an issue with impossibility to send faxes via Wildix Fax Printer
[WMS-9084] - sys: fixed an issue in which PBX could freeze after reboot
WMS Beta 5.01.20200602.1 Date: 02.06.2020
Fixes
[WMS-9023] - sys: fixed call drop issue for calls received or placed via BRI/ PRI media gateways
...
WMS Beta Version 5.01.20200601.1 Date: 01.06.2020
Fix
[WMS-9046] - wms: fixed an issue with incorrect displaying of JSON editor in fullscreen mode on Dialplan rules page
WMS Beta Version 5.01.20200528.1 Date: 29.05.2020
Fix
[WMS-9002] - sys: memory leak fixes and general memory optimization for systemd service manager
WMS Beta Version 5.01.20200522.1 Date: 27.05.2020
Improvements
[WMS-6693] - sys: enabled by default DTLS-SRTP media encryption between PBXs in WMS Network
...
- page refactoring
- added possibility to edit rules via JSON editor ("Developer" option)
WMS Beta Version 5.01.20200514.1 Date: 15.05.2020
Improvement
[WMS-8691] - sys: SDES-SRTP feature is now enabled by default on supported devices (BPI/ PRI gateways, WP480G r3/ WP490G r3/ WorkForce, WelcomeConsole)
Fix
[WMS-8455] - sys: fixed an issue when after call pickup/ call forward, user received a call from another user whose call was previously picked up and two calls were bridged automatically instead of a second incoming call
WMS Beta Version 5.01.20200508.1 Date: 11.05.2020
Improvements
[WMS-8605] - col: URL previews in Collaboration messages are now displayed in a language set in user's Personal Settings
...
- for all the system: go to WMS Dialplan -> General Settings -> Set dialplan variables -> add INTRUSION_NOTIFICATION=yes
- for a specific group of users: modify Dialplan procedure used for the group -> add Set application and insert INTRUSION_NOTIFICATION=yes
Fixes
[WMS-7349] - col: increased clickable areas for DTMF keypad in Collaboration call dialog window
...
WMS Beta Version 5.01.20200424.1 Date: 27.04.2020
Improvements
[WMS-7535] - sys: improved SIP DoS protection
[WMS-8435] - col: redesign of Collaboration top menu
WMS Beta Version 5.01.20200416.1 Date: 17.04.2020
Improvement
[WMS-8338] - sys: added possibility to select proper SMB version during Windows share initialization
The option "SMB version" is located in WMS Settings -> System -> Storages -> Add NFS/Windows share.
WMS Beta Version 5.01.20200413.1 Date: 15.04.2020
Fix
[WMS-8540] - sys: fixed an issue with SIP Proxy syslog errors for SIP trunk of German VoIP operator Deutsche Telekom SIP Anlagenanschluß
WMS Beta Version 5.01.20200410.3 Date: 13.04.2020
New Feature
[WMS-8635] - col: added possibility to edit the last sent chat message in Collaboration
...
- not supported on mobile devices and Kite: a remote side receives the modified text as a second message
Improvements
[WMS-8609] - wms: refactoring of HTTP proxy client page in WMS Settings -> System
...
To switch to the version 3: https://confluence.wildix.com/x/2IPIAQ (Update instructions).
[WMS-8680] - wms: removed deprecated Colleagues API endpoints:
- POST /api/v1/Colleagues/
- PUT /api/v1/Colleagues/{id}/
- DELETE /api/v1/Colleagues/{id}/
- DELETE /api/v1/Colleagues/{ids}/
Fixes
[WMS-8678] - wms: fixed an issue in which it was impossible to manage calls (start/ answer/ hangup) from Zoho CRM because it couldn't be authorized on PBX
[WMS-8679] - sys: fixed an issue with click-to-call from Zoho CRM not working in some cases
WMS Beta Version 5.01.20200402.1 Date: 03.04.2020
Improvement
[WMS-8573] - sys: enabled TProxy multiple processing for handling multiple connections
Note: for PBXs with > 2GB of memory. CPU load is decreased by splitting multiple processes for each CPU core.
Fix
[WMS-8383] - wms: fixed an issue with call and chat history not working after applying backup from Cloud PBX
WMS Beta Version 5.01.20200327.3 Date: 30.03.2020
New Feature
[WMS-7504] - sys: call waiting parameter can now be activated for Call Groups with CG strategy “Call All 32”
Improvements
[WMS-8368] - wms: refactoring of W-AIR Networks page in WMS -> Devices
[WMS-8402] - wms: removed possibility to synchronize time manually on NTP Server page in WMS Settings -> System
Fixes
[WMS-7944] - col: limited size of a group chat title to 1024 symbols
...
[WMS-8630] - sys: fixed an issue with Dialplan crashing if it contained previously deleted IVR tree
New Firmware
New firmware for WP480GR3 v. 63.145.10.13, WP490GR3 v. 67.145.8.92, WelcomeConsole v. 68.145.2.24
[WMS-6918] - dev: fixed an issue with delay of handling calls on WP480GR3, WP490GR3, WelcomeConsole in Failover environment if Secondary PBX was down
WMS Beta Version 5.01.20200317.2 Date: 18.03.2020
Improvement
[WMS-8290] - app: WIService v. 2.12.1 (Windows) improves collecting of crash logs: now logs from crash_dumps folder are sent automatically
WMS Beta Version 5.01.20200313.4 Date: 16.03.2020
New Features
[WMS-7199] - sys: added support for direct RTP between Kite and Web phone
Added full ICE support for Kite and WebRTC phone:
- endpoints in the same network - media goes directly
- endpoints in different networks and open/ moderate NAT - STUN is used to find the best pair of candidates
- endpoints in different networks, strict NAT - media goes through TURN (on PBX)
The feature is disabled by default. To enable it, add the following line to the file /rw2/etc/kamailio/host_specific_custom.cfg:
...
[WMS-7264] - wms: added support for S2S authentication via token for Wildix PBX API
...
Github developer documentation: https://github.com/Wildix/s2s-client-php
Improvements
[WMS-7772] - sys: added support for up to 1000 nodes in WMS Network
...
Note: for S2S auth, use PHP HTTP client library (ticket WMS-8204).
Fix
[WMS-8345] - col: fixed an issue in which CDR-View didn't work with a large number of excludes