| Scroll export button | ||||||||
|---|---|---|---|---|---|---|---|---|
|
| Info |
|---|
The manual provides you with the necessary information about your DECT handset W-AIR basic (ex W-AIR 70)/ W-AIR 100 (End Of Life) / W-AIR LifeSaver (ex W-AIR 150) / W-AIR Med / W-AIR Office. Please read this guide to ensure the proper installation and operation of the DECT handset. Useful links:
Updated: May 2021 Permalink: https://wildix.atlassian.net/wiki/x/DxnOAQ |
| Warning |
|---|
Important:
|
...
Compatible headsets:
Wildix headsets: http://www.wildix.com/voip-phones-and-headset/#headsets.
Third party headsets integrated with Wildix: Wildix Compatible Headsets – Jabra, Plantronics, Sennheiser, JPL, Axtel.
...
Indicates Missed call / New Voicemail / Low battery. LED behavior can be configured in Settings.
2- 2 Soft keys
Select different options indicated in the lower part of the screen. From the idle used to access Contacts / Central directory menu.
...
Missed call / New Voicemail / Low battery. LED behavior can be configured in Settings.
2- Volume Up / Down key (on the side panel)
...
Missed call / New Voicemail / Low battery. LED behavior can be configured in Settings.
2- Volume Up / Down key (on the side panel)
...
Missed call / New Voicemail / Low battery. LED behavior can be configured in Settings.
2- Volume Up / Down key (on the side panel)
...
Missed call / New Voicemail / Low battery. LED behavior can be configured in Settings.
2- Volume Up / Down key (on the side panel)
...
| Note |
|---|
Note: To assign a handset to a user, please follow the steps described in the chapter Login. |
Deregister a handset from the base station
- Select Deregister
- Enter the Access code and confirm by pressing Yes
Multi registration (W-AIR 100 (End Of Life) / W-AIR LifeSaver / W-AIR Med / W-AIR Office)
W-AIR 100, W-AIR LifeSaver, W-AIR Med and W-AIR Office support multi registration, which means a handset is able to remember up to 10 accounts it had been previously registered to:
...
- Select a contact and press More
- Select Delete contact to delete the selected contact or Delete all contacts to delete all the contacts
- Confirm by pressing Yes
Assign a Speed Dial number to a local contact
| Note |
|---|
Prerequisite: There must be at least one contact in the Contacts list. |
...
| Note |
|---|
Note: Each of the called participants can hang up to leave the conference call (in this situation the conference call continues between the remaining participants). |
Record a call
| Note |
|---|
Note: Only users with certain permissions can record calls; check ACL permissions "Can use" - "Personal recording" (WMS -> Users -> Groups). Documentation: ACL rules and Call classes management Guide. |
...
General Settings
Go to Settings menu.
Time & date
Adjust time and date and change a time / date format.
Language
Select the language of the phone interface.
LED signal
Select under which condition LED signal of the handset must blink:
...
Otherwise it is possible to disable the LED signal.
Power save
Set up the the display to go out after timeout to save the battery (from 5 up to 60 seconds).
Security (Auto keylock)
Enable / disable auto key lock after timeout (from 15 seconds up to 5 minutes).
Change PIN option allows changing the security PIN (used when settings are reset, default PIN - 0000).
Handset name
Enter the name to be displayed at the home screen.
Reset settings
Reset the handset to default settings.
Status
Information about the base station the handset is registered to and the handset status.
- Base station information: SW version, HW version, IP address, Mac address, System name
- Handset status: SW version, HW version, DECT band, Battery level, Model, IPEI, Bluetooth (W-AIR LifeSaver / W-AIR Med / W-AIR Office)
Auto Answer
- Normal: press the green Off-hook Key to answer an incoming call
- Any key: press any key on the keypad (except the red On-hook Key and the two Soft keys) to answer an incoming call
- Automatic: incoming call is answered automatically after five seconds
Silent Charging
Disable / mute ringtone when the handset is charging:
- Off: audio alert is present and incoming call screen is displayed
- Silent: no audio alert, but the incoming call screen is displayed
Bluetooth (W-AIR LifeSaver / W-AIR Med / W-AIR Office)
When BT headset is connected, the audio is routed to the headset during a call.
...
Use Wildix Bluetooth headset WHS-BT: Phones Accessories Quick Start Guide.
Third party headsets integrated with Wildix: Wildix Compatible Headsets – Jabra, Plantronics, Sennheiser, JPL, Axtel.
Push To Talk (W-AIR 100 (End Of Life) / W-AIR LifeSaver / W-AIR Med / W-AIR Office)
| Warning |
|---|
Important: enabling this feature reduces the number of available channels on each base station to 6. |
...
Audio Settings
Go to Audio settings menu.
Silent mode
When enabled, no sounds are played on the handset.
When enabled, no other audio settings can be changed in the Audio Settings menu.
Ring Volume
Use the Navigation keys to adjust the ring volume.
When the ring volume is set to mute, the “Sound off” icon is displayed in the Status bar and no sound is heard when receiving an incoming call.
Ring Melody (for each Call Class)
Select the ringtone for each call class (external/ internal/ whitelist/ blacklist/
Alert Volume and Alert Tone (W-AIR 100 (End Of Life) / W-AIR LifeSaver / W-AIR Med / W-AIR Office)
Select the Volume and the Ringtone for the alarm clock.
Vibrator (W-AIR 100 (End Of Life) / W-AIR LifeSaver / W-AIR Med / W-AIR Office
Enable / disable vibration.
Key Sound
Select the sound to be played when the keys are pressed on the handset (“Click” / “Tone”) or disable the key sound ("Silent").
Confirmation Sound
When enabled, an audible confirmation sound is played back when any action succeeds or fails.
Coverage Warning
When enabled, an audible notification is played back to the earpiece during the call when the user is close to the maximum range of the nearest base station in the system.
Charger Warning
When enabled, an audible notification is played back when the handset is placed into the charger.
Noise Reduction (W-AIR LifeSaver / W-AIR Med / W-AIR Office)
Enable / disable noise reduction.
...
For more information about configuring emergency settings, please refer to W-AIR Network Guides: W-AIR Network Admin Guide - Sync over the air and W-AIR Network Admin Guide - Sync over LAN.
Alarms triggering
Alarm Button: Long-press (3 seconds) the red button on top of the handset
- Pull Cord Alarm: Pull a cord from the pull cord hole on the right side of the handset
- Running Alarm: Shake up and down the handset for several seconds
- Man Down Alarm: Put the handset in the position with an angle over 60 degrees with respect to the horizontal. The time for the handset to be still before the alarm is triggered can be set on base station web interface
- No Movement Alarm: Do not move the handset. The timeout after which No Movement alarm is triggered is set on the base station web interface
...