| Scroll export button | ||||||||
|---|---|---|---|---|---|---|---|---|
|
| Info |
|---|
W24FXS 2015 Quick Installation Guide explains the steps that help you to connect and configure the FXS gateway. FXS gateway allows you to connect analog phones and fax machines to your IP PBX. FXS Gateways Datasheet: Media Gateways Datasheet. Other FXS Media Gateways Guides:
Updated: March 2017 Permalink: https://wildix.atlassian.net/wiki/x/Qh3OAQ |
Table of Contents
Overview and LED indications
...
- 1 WAN port RJ45 10/100 base-T
- 1 Console port RJ45 with RS232 standard to connect DB9
- 1 RST switch to perform the factory reset
- 1 PWR LED:
- solid green indicates that the gateway is powered on
- 1 RUN LED:
- turns solid green for a few seconds once the gateway is powered on;
- fast blinking indicates that all ports are registered successfully
- slow blinking indicates that ports failed to register
- off (when connected to power) indicates that the gateway doesn’t boot up
- 1-24 ports for connection of analog devices
- 1-24 LEDs:
- solid green indicates that the port is in use
- off (when connected to power) indicates that the port is idle
RJ21 Wire Sequence (
...
W)
One RJ21 cable has 25 pairs of wires. The 25th pair is vacant, which means that one RJ21 interface supports up to 24 calls.
Connection to power supply
...
- You can connect analog devices directly to ports marked 1-24
- Otherwise connect the patch panel to the RJ21 port situated on the rear panel using the connector provided
Configuration of the FXS gateway
- Follow our online Guide to provision the media gateway
- For remote/unreachable media gateways behind NAT/Firewall, follow our online Guide to remote provisioning.
- Follow our online guide to assign the ports of the FXS gateway: Assign analog ports of FXS to users
...