The Document describes how to configure Intercoms integrated with Wildix for sending video streams to Vision/ SuperVision/ WP600AXX/ Android/ Collaboration before answer and adding an unlock button for door open function. Created: October 2018 Permalink: https://wildix.atlassian.net/wiki/x/TA7OAQ |
Information on intercoms which are fully integrated with Wildix system: www.wildix.com/integrations.
User Guides on Integration with some Intercoms are available on Doorphone integrations.
Supported devices: Collaboration/ Vision/ SuperVision/ WP600AXX/ Android mobile app. Note, that iOS mobile app is not supported. |
The functionality allows displaying an incoming video stream before answer on Collaboration/ Vision/ SuperVision/ WP600AXX/ Android mobile application.
To implement such behaviour, proceed with the following steps:
Custom application -> SIPAddHeader(Camera:http://admin:admin@192.168.1.100/picture0.jpg)
where:
More examples:
Note: To check if a picture URL is correct, paste it in the address bar. For example: http://10.100.4.134/record/current.jpg |
Note: This custom application can be used in two scenarios:
In case you don’t know how to indicate the path correctly for your IP webcam / intercom, check this resource: LINK (mind that only HTTP connection and JPEG type are supported). |
Note: Some intercoms may require additional configuration on their web interface. Check the online documentation for details: 2N Helios IP Integration, AphaTECH IP BOLD 65 Integration, Baudisch (Mod.33-1486) Integration, Mobotix T25 Integration. |
Example of Android mobile app video preview:
Note: The functionality can be implemented only for Collaboration/ Vision/ SuperVision. |
To be able to unlock doors from the call management window, you can add an unlock button.
Custom application -> SIPAddHeader(Unlock-Button:*1234#)
where:
How the button looks like: