Skip to end of banner
Go to start of banner

teams4Wildix - Microsoft Phone System

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 8 Next »

This Guide describes the process of Microsoft Phone System Setup.

General documentation on teams4Wildix can be found here: teams4Wildix - integration of Microsoft Teams with Wildix PBX - Documentation

Additional documentation be found on teams4Wildix portal -> Services -> Teams -> Documents.

Created: July 2021

Permalink: https://confluence.wildix.com/x/9oJtBQ

Prerequisites

General requirements:

  • WMS version: 5.03.20210623.1 or higher
  • Activated CLASSOUND
  • Wildix UC-ESSENTIAL / UC-BUSINESS / UC-PREMIUM license for each user

Additional requirements for Microsoft Phone System:

  • Monthly subscription fee. The fee is purchased for the entire PBX on WMP (the option for purchasing is coming soon. If you want to activate Mode 2, please contact your Area Manager)
  • Microsoft 365 (Office 365) E5 or Microsoft 365 (Office 365) E3 + Phone system for each user

Step 1: Enable MS Phone System for your customer - instruction for the Wildix Partner

The steps specified in this chapter are carried out by the Wildix Partner.

Step 1. Request MS Teams Phone System service on WMP

  1. Access WMP → select the Customer → select the PBX → click Edit

  2. Enable the checkbox next to MS-PhoneSystem

  3. Click Save in the upper right-hand part of the screen and proceed with confirming your order.
  4. You will receive indications regarding your next steps via email from Wildix Customer Care.  

Step 2. Provide the needed information to the Wildix Customer Care 

Once you request the service on WMP, a ticket to Wildix Customer care is opened automatically. You will receive an email requesting the following information regarding your customer:

  • Amount of users that require Mode 2 (MS Phone System) of the Integration (please note that these users must have 365 E3 plan + phone system license or 365 E5 plan on the Microsoft side)
  • Email of a customer's admin (email(s) of one user or more users who have admin rights in the customer's Microsoft domain). Multiple emails can be sent and set up

Once this information is provided, you will need to wait till the system is added to the dedicated teams4Wildix portal. 

Step 2. Set up Microsoft Phone System - instruction for the end customer

The steps specified in this chapter are carried out by the Partner's end customer (the user who has admin rights on the MS domain of the company).

To be able to make calls using Teams Dialpad, you need to set up the connection between your PBX and Office 365 tenant. For that, activate an account on https://admin.teams4wildix.com/.

Step 1. Activate an account on the teams4wildix portal 

  1. Once you receive an invitation via email, click Accept Invitation to access the portal https://admin.teams4wildix.com/:

  2. Access the teams4Wildix portal using your Microsoft 365 credentials. Go to Getting Started -> Prerequisites tab and click Check My Tenant:

  3. Select Microsoft account with admin rights and the required licenses
  4. If the account meets all the requirements, the Tenant check is successful and you can click Next to go to the next step:


Step 2. Create PBX 

You are under PBX tab. To add your PBX, fill out the fields specified below (no need to touch other fields):

  • Start by selecting your PBX from the available templates: select Teams4Wildix 
  • Country: select your country from the list
  • SIP Domain: enter your PBX domain name
  • Calling Policy: check off Manage Teams Calling Policy
  • Teams Voicemail: select Prohibit Voicemail & Call Forwarding 
  • Music on Hold: select PBX Hold Music 

Click Add PBX

(below an example of a PBX that was already added on teams4Wildix portal)

Step 3. Sync the portal with your MS account

You are under Teams tab. To sync teams4Wildix portal with your Microsoft account, follow these steps:

  • Click Enable Service 

  • Select the same MS account used in Step 1
  • Once the sync is active, click Next to go to Step 4

Sync may take up to 15 minutes

Step 4. Add users 

Important notes:

  • Use user extension (NOT usernames) as SIP Username and Auth Username
  • Use SIP password (NOT Web password) as Password. To get SIP passwords, export user's data in WMS -> Users -> Export CSV. In the downloaded file, actual passwords can be found in column SipPassword

You are under Users tab now. To add users, click Add User and fill out the fields specified below:

  • Select a User: select user from the list of available users 
  • Phone Number: this should be a unique number, it can be an extension number
  • SIP Username: enter user extension number
  • Auth Username: enter user extension number (again)
  • Password: enter user SIP password (do not mix up with user Web password!)

Click Add to create a user

You can also import users via CSV to create users or update (use the button Import Users located next to Add user).


Microsoft Phone System Usage

Using Microsoft Phone System service enables you to place and receive calls from the Calls dialpad of MS Teams interface. However, with Microsoft Phone System you can still use all the features described in the general teams4Wildix document as well. Consult the guide: teams4Wildix - integration of Microsoft Teams with Wildix PBX - Documentation. 


To place calls using Teams Dialpad, go to Calls tab, enter an internal or an external phone number and start a call. You can control an active call (put it on pause/ resume, transfer, etc) from the MS Teams call dialog:When there's an incoming call, there's a popup from MS Teams interface allowing you to accept or reject the call:


  • No labels