Info |
---|
Update repository: rel50. In case of automatic upgrade, make sure to specify the current repository. Link for sharing: https://wildix.atlassian.net/wiki/x/GgHOAQ Other changelogs: https://www.wildix.com/new-releases-and-updates/ |
...
Warning |
---|
Starting from September 13, 5.04.20220819.1 upgrade becomes gradually available in different countries/ regions, according to the schedule below:
*Note: PBX is considered “related to a certain country” based on the Wildix sales manager assigned to the Partner, and not on the physical location of the system or the customer. |
WMS Release Candidate 5.04.20220819.1 Date: 29 August 2022
Warning |
---|
IMPORTANT: This version will be available only for PBXs related to the countries according to the schedule (see above)! You can use rel50rc repository for manual upgrade of your PBXs if you want to try this version right away. |
Improvements
[WMS-14192] - wms: improved the logic of phonebooks import, so that country code is added to the Extension field if the extension consists of 7 or more digits
...
[WMS-14423] - col: Collaboration stability and performance improvements
Fixes
[WMS-12208] - sys: fixed an issue in which the feature "Notify by email in case SIP trunk registration status is changed" didn’t work and PBX admin didn’t receive an email notification starting from WMS 5.03
...
[WMS-14801] - sys: fixed an issue in which the ‘migrate2cloud’ script failed to execute
New Firmware
W-AIR firmware v. 530b801
[WMS-14652] - dev: fixed an issue with W-AIR base stations in which attempts to start an outgoing call failed resulting in “insufficient resources” error message
Note: Maximum 8 handsets (5 in case of W-AIR Small Business) can be updated at a time per a base station. In case a Multicell system has more than 8 handsets located on each base station, additional handsets need to be turned off during the first 8 handsets upgrade.
WMS Stable 5.04.20220608.1 Date: 09 June 2022
New Features
[WMS-10874] - x-ca: added support for scheduled reports in x-caracal
...
- Go to x-caracal -> "Setup" -> "Schedules/ Alerts"
Note: The "Setup" menu is available only for a manager who is a user with Admin user type. - Configure the report settings under "New Scheduled Report": enter destination email (you can add multiple emails, separated by comma), select the reports to be sent, queues, time range, cron configuration.
- Tick off the checkbox next to "Active" and click "Save". The report appears in the list of Scheduled Reports and Alerts on the right, where you can modify or delete it.
Documentation:https://confluence.wildix.com/x/FAEzBQ x-caracal documentation.
[WMS-13623] - x-ca: added French, Portuguese, and Spanish localizations of x-caracal
Improvement
[WMS-13974] - sys: for improved security, closed the following unnecessary ports on the PBX:
- TCP/ UDP 111
- TCP 53
- TCP 389
- TCP 636
Fixes
[WMS-12150] - sys: fixed a rare issue in which users faced “Your connection is not private” error message when trying to access Collaboration
...
[WP-199] - dev: security improvements for WP phones
WMS Stable Update Date: 06 May 2022
Additional package: 5.04.20220506.5
Improvement
[WMS-12815] - sys: added support for import of contacts from Hana DB
...
[WP-202] - dev: fixed an issue in which WorkForce occasionally rebooted in case DuoLED-BT headset was used and which also led to no audio during calls after the reboot
WMS Stable 5.04.20220425.1 Date: 27 April 2022
Improvements
...
WMS Stable Hotfix Date: 13 April 2022
Additional package: cw-5.04.20220413.1
Fix
[WMS-13730] - sys: fixed an occasional issue in which after closing Collaboration app on mobile (iOS and Android), users didn’t get incoming Call group calls
WMS Stable Hotfix Date: 12 April 2022
Additional package: 5.04.20220412.1
Fix
[WMS-13842] - wms: fixed an issue in which sync of contacts via CardDAV stopped working after upgrade from WMS 5.03 to 5.04
WMS Stable Hotfix Date: 11 April 2022
Additional package: 5.04.20220411.1
Fix
[WMS-13846] - wms: fixed an issue in which check-in via Hotel Manager was not possible after upgrade to WMS 5.04.20220325.8
WMS Stable Hotfix Date: 25 March 2022
Additional package: cw 5.04.20220325.8
Improvements
[WMS-12715] - x-ca: allowed access to REST API on x-caracal
[WMS-13384] - wms: allowed to use symbols (except for @, &, <, >) and accented characters for all languages in the Department field in WMS -> Users (when adding, editing, or importing users)
Fixes
[WMS-13456] - wms: fixed an issue in which Dialplan application “Set” -> “Caller number”/ “Caller number on trunk” and "prepend digits" option modified caller name instead of caller number
...
[WMS-13663] - col: fixed an issue in which Collaboration interface was in English though Estonian language was set
WMS Stable Version 5.04.20220309.1 Date: 10 March 2022
New Features
...
- The presence of users that are not added to the roster is not available.
- It may take up to 10 minutes to apply changes in the Departments tree, enabling/ disabling the functionality, etc.
Documentation: https://confluence.wildix.com/x/0AUkBg How to configure Departments tree.
[WMS-12726] - wms: added a new API endpoint that returns groups or departments with user extensions in a tree view
...
- SpeakerDisable=yes - disables the speaker mode for all WorkForce devices;
- SpeakerDisable=no - enables the speaker mode for all WorkForce devices;
- SpeakerDisable=list of extensions (e.g. SpeakerDisable=38001,24001,22005) - disables the speaker mode for the mentioned extensions.
Improvements
[WMS-9771] - wms: added new API endpoints for trunk lists
...
[WMS-12514] - classound: added possibility to internationally send outgoing SMS via CLASSOUND for US/ Canadian and other country DIDs via hardcoded CURL request
Documentation: https://confluence.wildix.com/x/OISEB How to send and receive SMS via CLASSOUND
[WMS-12522] - wms: added possibility to provide remote PBX domain name instead of PBX IP in sync_pbx script for failover sync configuration
...
By default, it is disabled.
Documentation: https://confluence.wildix.com/x/KQg8AQ Provisioning Custom Settings.
[WMS-12953] - wizy: made improvements so that music on hold is not played in Wizyconf conference room if PBX user who called the conference puts this call on hold
...
Provisioning Custom Settings documentation: https://confluence.wildix.com/x/KQg8AQ Provisioning Custom Settings.
[WMS-13078] - wms: added possibility to use special characters (“\”, “/”, “|”) in the Department field when using API functions PUT and POST for Colleagues, which provides opportunity of user import for PBX with multilevel Departments tree
...
[WMS-13537] - col: removed Russian from the supported languages in Collaboration and WMS
Fixes
[WMS-9015] - sys: fixed an issue of no CDR record created for an incoming call to a Call group, if the call was answered with the BLF Function key Call group and the Call group Dialplan included Record call application
...
[WMS-13504] - sys: fixed an issue in which in some rare cases multiple user registrations and multiple calls didn’t work correctly
New Firmwares
New firmwares: Start: v. 150.145.2.9 WorkForce: v. 65.145.6.24 WelcomeConsole: v. 68.145.2.44 WP410 r2: v. 50.145.6.175 WP480 r3: v. 63.145.10.37 WP490 r3: 67.145.8.107
...
WMS Stable Version 5.03.20220127.1 Date: 27 January 2022
Fixes
[WMS-12577] - sys: fixed an issue in which after upgrade of PBX, the ESPA monitor stopped working and its package was reinstalled, overwriting existing configurations with default ones
...
[WMS-13143] - dev: fixed an issue in which WorkForce didn’t play opus files if user language was English, after upgrade to WMS 5.03.20211222
WMS Stable Version 5.03.20211222.2 Date: 22 December 2021
New Features
...
- Configure Alarm and Text Messaging & Alarm Server on Main W-AIR Base using HW/VM PBX IP
- Start W-AIR alarms service on HW/VM PBX
- Create a dedicated Dialplan on HW/VM PBX
Documentation will be updated later:https://confluence.wildix.com/x/UoPPB: How to get location of W-AIR Base Station in case of emergency alarm.
[WMS-12609] - x-ca: fixed an issue in which x-caracal failed to display reports if the selected date range was highly loaded
...
The values can be changed in /rw2/etc/provision.conf, the documentationhttps://confluence.wildix.com/x/KQg8AQProvisioning Custom Settings.
[WMS-12755] - sys: fixed a rare issue when it was impossible to make calls because of PBX engine deadlock
[WMS-12943] - x-ca: fixed an issue with x-caracal installation after upgrade to WMS 5.03.20210929, in which "Settings saved successfully" message appeared but x-caracal failed to be installed
New Firmwares
New firmwares for WP480GR2: v. 55.145.6.114, WP480GR3: v. 63.145.10.36, WP490GR3: v. 67.145.8.106, Start: 150.145.2.7, WorkForce: v. 65.145.6.20.
...
- increased background noise and too loud default microphone level in handsfree mode
- muffled sound between two WorkForce devices
- background noise in the handset's speaker
- muffled audio on WiIdix DuoLED and DuoLED BT headsets connected to WorkForce if users spoke at the same time
- WorkForce volume level higher than on WP480GR3
WMS Stable Hotfix Date: 18 October 2021
Additional package: cw-5.03.20211012.1
Fix
[WMS-12263] - sys: fixed an issue of call drop in Collaboration and no media on WP which occurred when Collaboration user, being on a call with WP phone user, turned on personal call recording after completion of attended transfer under the following conditions:
- the system was upgraded to WMS 5.03
- g729 transcoding was enabled in /etc/callweaver/sip.conf
WMS Stable Version 5.03 Date: 12 October 2021
Additional package: cw-5.03.20211012.1
Fix
[WMS-12317] - classound: fixed a rare one-way audio issue on CLASSOUND calls, which occurred due to incorrect processing of RTP Keep Alive by a remote carrier
...
Additional packages: ca-certificates_20200930, x-caracal_5.03.20210929.1, cw-5.03.20210930.1, sipproxy_5.3.6-5.03.20211001.1
Fixes
[WMS-12270] - x-ca: fixed an issue in which Agent information was duplicated in x-caracal Agent reports if the Call group strategy was Call All 32
[WMS-12291] - sys: updated the SSL certificate to ensure correct work of Wildix services
WMS Stable Version 5.03.20210927.4 Date: 27 September 2021
Improvements
[WMS-10957] - wms: updated API documentation in WMS to include all the available API endpoints
...
Note: to disable this option, change the value of the variable to “no”: QUEUE_FAST_RECALL=no. If you delete the variable, the option won’t be disabled.
Fixes
[WMS-12139] - sys: fixed an issue when in some cases firmware update of W-AIR handsets failed after the PBX was upgraded from WMS version 5.02 to 5.03
...
[WP-148] - dev: fixed an issue in which microphone volume on WorkForce got much higher after WMS upgrade to 5.03
WMS Stable Version 5.03.20210910.1 Date: 10 September 2021
Fixes
[WMS-11233] - wms: fixed an issue in which the Call group notifications manager received a false missed call notification if a member of the Call group parked a call
...
Warning |
---|
Important for WMS Network:
|
New Features
[WMS-10454] - sys: added possibility to deliver Kite group chat requests to all call group members simultaneously
...
x-caracal documentation: https://confluence.wildix.com/x/FAEzBQx-caracal documentation.
[WMS-11767] - wms: added ACL rule “Can/ cannot - See call recordings”, which adds a possibility to restrict users from accessing call recordings
...
- x-caracal settings are not reset when: 1) resetting PBX to factory defaults or 2) when restoring from backup
x-caracal documentation: https://confluence.wildix.com/x/FAEzBQ x-caracal documentation.
Improvements
[WMS-7761] - col: added support for the US standard date format "mm/dd/yyyy" in CDR-View
...
Automatic removal of contacts applies, in case the option “Remove existing contacts which are not received from the backend“ is enabled. This improvement can be useful on big installations, where users are imported from an external source, and dummy (virtual) users with service licenses (e.g. part orbits, group managers, etc.) are created and kept locally.
Fixes
[WMS-8131] - sys: fixed an issue where in some rare cases a voicemail received from another user could end up in a hidden voicemail folder
...
[WMS-11882] - sys: fixed an issue when in some rare cases users on PBXs with WMS 5.02 version couldn’t see registered devices in Collaboration
New Firmware
New firmwares for WorkForce v 65.145.6.14 WP480GR3: v 63.145.10.35 WP490GR3: v 67.145.8.105 WelcomeConsole: v 68.145.2.40
...
- The issue affected FXS r3 gateways with firmware versions 27.81.10.15, 27.81.10.16, 27.19.10.15, 27.19.10.16.
WMS Stable Version 5.02.20210722.1 Date: 3 Aug 2021
Fixes
[WMS-11208] - sys: fixed no media issue after attended transfer in case transcoding was enabled between codecs g729 -> g729 -> g711
[WMS-11554] - wms: fixed incompatibility of Collaboration Web Phone with Google Chrome v. 93 (due to be released on Aug 31)
WMS Stable Version 5.02.20210518.1 Date: 19 May 2021
Hotfixes
[WMS-11220] - wms: fixed an issue with impossibility to access Collaboration via Google Chrome v 91 if:
...
WMS Stable Hotfix Date: 14 May 2021
Additional package cw 5.02.20210514.1
[WMS-11242] - sys: fixed an issue in which under rare conditions it was impossible to receive/ make calls, after WMS release 5.02.20210416.1
...
For activation, refer to the document: https://confluence.wildix.com/x/FAEzBQ x-caracal documentation.
Improvements
[WMS-7872] - dev: added possibility to set image refresh button for 2N intercom integration
...
New W-AIR firmware version 0520b1 for W-AIR Base Sync Plus, W-AIR Base, W-AIR Base, Small Business, W-AIR Basic, W-AIR LifeSaver, W-AIR Med, W-AIR Office.
Updated documentation: https://confluence.wildix.com/x/qADwAQIntegration of 2N intercom Helios IP with Wildix.
[WMS-10101] - col: implemented the new logic for extensions update in Collaboration Settings -> Extensions: now new versions are obtained directly from Collaboration, regardless of updating WMS version
...
[WMS-10872] - wms: added a warning message showing license overuse while creating, editing or importing users
Fixes
[WMS-8663] - sys: fixed an issue in which a Call Group member stopped receiving CG calls if Force Call Forward was enabled to an external number and answered from that number
...
[WP-45] - dev: fixed an issue with Voicemail notifications not working on WorkForce
WMS Stable Hotfix Date: 26 March 2021
Additional package: cw 5.02.20210326.1
[WMS-10827] - sys: fixed an issue with PBX engine being restarted by monit in some rare conditions after upgrade to WMS 5.02
WMS Stable Version 5.02.20210312.1 Date: 12 March 2021
Fixes
[WMS-10798] - col: fixed an issue with Collaboration Native App v. 2.1.6 not working after upgrade to WMS 5.02
...
WMS Stable Version 5.02.20210305.1 Date: 05 March 2021
Fixes
[WMS-10551] - col: increased the width of a drop-down list showing live search results in Collaboration
...
Documentation: WebRTC Kite Chatbot SDK.
Improvements
[WMS-6719] - sys: added 03, 030, 0345 prefixes to "National" and 084 prefix to "Premium" call classes for the UK to improve call class recognition and for the correct management of ACL permissions
...
Documentation: How to disable updates for BLF keys configured for call group members with Call All strategy .
Fixes
[WMS-6925] - col: fixed an issue with an original caller name being displayed in CDR-View instead of a modified one for trunk calls if Dialplan application "Set -> Caller name" was used
...
- fixes an issue with W-AIR Base Stations restart on each SIP login or logout
- adds possibility to get location of the nearest W-AIR Base Station in case of emergency alarm triggered on W-AIR Handset (init. ticket WMS-9671)
WMS Stable Version 5.01.20201006.1 Date: 13 October 2020
Improvements
[WMS-8043] - sys: enabled by default daily auto upgrade for newly created systems
...
[WMS-9816] - api: security improvements for Zoho integration
Fixes
[WMS-8184] - col: fixed an issue with popup notifications being not displayed for BLF key "Call group" with disabled "Audio notification" option
...
[WMS-9672] - dev: new firmware for W04FXO r3 v. 27811011 includes performance optimization
WMS Stable Version 5.01.20200923.1 Date: 23 September 2020
Fixes
[WMS-9612] - sys: fixed no audio issue for calls between 2 PBXs in WMS Network located in 2 different routable LAN networks
...
WMS Stable Version 5.01.20200914.1 Date: 16 September 2020
The current version includes the following changes along with generic security improvements:
New Features
[WMS-9325] - wms: added possibility to access storages and NTP Server menus before PBX activation
[WMS-9539] - col: added support for Danish language
Improvements
[WMS-8990] - col: increased the max number of CDR-View exported records up to 500 000
...
[WMS-9727] - col: improvements for customer feedback option in Collaboration
Fixes
[WMS-7345] - sys: fixed an issue with outgoing fax queue being blocked after the first unsuccessful attempt
...
- not supported on mobile devices and Kite: a remote side receives the modified text as a second message
Improvements
[WMS-6693] - sys: enabled by default DTLS-SRTP media encryption between PBXs in WMS Network
...
- all devices, except GSM trunks (W01GSM and DaySaver) use TLS transport on VM/ HW PBXs (previously it was supported on Cloud PBXs)
- "Use TLS / SRTP for local devices" option in WMS Settings -> Settings -> PBX -> SIP-RTP is no longer supported and will be deleted from the web the interface later
- use custom provisioning parameter "SIPTransport" (https://confluence.wildix.com/x/KQg8AQ) to set another protocol
Fixes
[WMS-8345] - col: fixed an issue in which CDR-View didn't work with a large number of excludes
...