WMS 5.0 beta changelog | rel50beta |
Update repository: rel50beta In case of automatic upgrade, make sure to specify the current repository. Link for sharing: https://confluence.wildix.com/x/foAJB |
|
Requirements:
|
API admin user authentication: It is recommended to use PHP HTTP client library for S2S authentication: https://github.com/Wildix/s2s-client-php API documentation: https://<pbx_host>/api/v1/doc/#section/Authentication |
Starting from WMS 5.03, Directory sync protocol is routed outside of WMS network. For correct behaviour of WMS Network, first update Server PBX and then Client PBXs. |
Additional packages: wildix-cw-5.04.20211027.1
[WMS-12607] - sys: fixed an issue of PBX engine crash which sometimes occurred after hanging up a call
[WMS-12108] - sys: integrated res_json module to handle json format inside Diaplan
Github doc: https://github.com/drivefast/asterisk-res_json
[WMS-12109] - wms: added Simple Token authentication method
How to use:
[WMS-9771] - wms: added new API endpoints for trunk lists
API endpoints:
[WMS-9772] - wms: made improvements in WMS -> Trunks -> Pricelists section
[WMS-10888] - sys: added an option to enable remote music on hold to be played instead of the local one for external calls
This option fixes an issue when an external callee put a call on hold and a caller heard the PBX music on hold instead of the callee's.
To enable the option:
Requirement:
Make sure the Support Refer and Hold option in Advanced settings is enabled, otherwise Play remote MoH won’t work.
[WMS-11786] - sys: updated RTPengine to the latest version for improved stability
[WMS-11867] - sys: added a check of free disk space before performing PBX upgrade to prevent possible upgrade failures
In case PBX doesn’t have enough space, the relevant error message is displayed in WMS, including the amount of free and required disk space
[WMS-11979] - dev: added possibility to control duration of the delay before answering a call on W04FXO r3 via custom provisioning parameter
How-to:
Add the following parameter to the /rw2/etc/provision.conf file:
DelayAfterOffhook = 1-255
Note: The parameter is only applicable to [wildixfxo3] section.
[WMS-12003] - wms: improved import of users, displaying the list of users that will be added, updated, or removed
[WMS-12123] - wms: added new API endpoints to manage failover PBX or remove a PBX in a WMS Network
API endpoints:
Note: These actions can be performed only on main PBX and only by an admin.
Also added the parameters “version” and “failover” to the existing API endpoint [GET] http://<pbxHost>/api/v1/network/pbxes response.
[WMS-9015] - sys: fixed an issue of no CDR record created for an incoming call to a Call group, if the call was answered with the BLF Function key Call group and the Call group Dialplan included Record call application
[WMS-11332] - col: fixed an issue when in some cases after the laptop woke up from sleep, user got an error message about another active session
[WMS-11817] - sys: fixed an issue with Dial by name feature, when in some cases if there were 2 people with the same first name and different last names and the called person’s last name contained a dash, the PBX identified the right person but dialled the other one
[WMS-11822] - x-ca: fixed several x-caracal issues in which:
[WMS-11864] - wizy: fixed an issue when in some cases there was a long response time when a user was creating a conference with 10 participants or more
[WMS-11925] - x-ca: fixed an issue in which automatic clearing of outdated data in x-caracal didn’t work properly in some cases, which could result in database overload
Clearing of old data is run at 4 am every day. By default, the system clears data older than 12 months, if other values are not specified in WMS -> Settings -> PBX -> Call and chat history.
[WMS-12006] - col: configured Call Control mode to be enabled automatically for users running Collaboration inside MS Teams
It is no longer required to set the parameter CALL_CONTROL_FEATURE=true in the config file /rw2/etc/env.custom.ini to enable Call Control mode for MS Teams.
[WMS-12029] - wms: fixed an issue in which in spite of the ACL rule “Cannot access menu - Devices”, admin still had access to Analog ports and W-AIR Networks in WMS -> Devices
[WMS-12036] - sys: fixed an issue in which it was not possible to configure Failover by DNS for DaySaver
Check this guide for instructions: https://confluence.wildix.com/x/FYfZBQ
[WMS-12038] - sys: fixed an issue with no audio in Collaboration during an outgoing call in case the called user was Away, the call was made to mobility and a caller heard an audio message before the call was answered; or in similar cases
[WMS-12118] - sys: fixed an issue with impossibility to make calls because of PBX engine memory consumption spike
[WMS-12183] - col: fixed an issue in which it was impossible to create Post-It via the Add button in Collaboration
[WMS-12184] - sys: fixed an issue in which after performing an attended transfer of an external call, the BLF key on WP phone still displayed internal user's name instead of the external CID after upgrade to WMS 5.03
[WMS-12233] - wms: fixed an issue in which it was impossible to import more than 10000 contacts from Google after PBX upgrade to 5.03.20210910.1
[WMS-12258] - col: fixed an issue with saving a contact in the Phonebook because some special characters were not automatically removed from the contact’s phone number, pasted from another source
[WMS-12268] - sys: fixed a rare issue of dropped calls which sometimes occurred because of PBX engine deadlock
[WMS-12277] - wms: fixed an issue of blank white screen after login to Collaboration, which occurred if a backup file of WMS 5.02 was applied on WMS 5.03
[WMS-12283] - sys: fixed an issue with log files rotation in /var/log/mysql folder on Cloud PBX
[WMS-12307] - sys: added a parameter that fixes an issue of FIAS Hotel integration (ASA PMS), in which it was impossible to make outgoing calls from rooms after check-in
How-to:
Add the following parameter to /etc/wildix/whoteld_manager_custom.conf: PostponeRE=true
Documentation about custom config parameters: https://confluence.wildix.com/x/0AiIAQ
[WMS-12379] - sys: fixed an issue of PBX engine crash in some rare cases
[FXX-3] - dev: fixed an issue in which DaySaver occasionally stopped sending SMS until rebooted
New firmwares: WP480GR2: v. 55.145.6.114 WP480GR3: v. 63.145.10.36 WP490GR3: v. 67.145.8.106
[WP-71] - dev: fixed an issue of an incorrect time on WP phones provisioned to HW/ VM PBX in case the phone had a static IP address and PBX was used as NTP server
Additional packages: wldix-cw-5.03.20211012.1
[WMS-12263] - sys: fixed an issue of call drop in Collaboration and no media on WP which occurred when Collaboration user, being on a call with WP phone user, turned on personal call recording after completion of attended transfer under the following conditions:
Additional packages: wldix-cw-5.03.20211012.1
[WMS-12317] - classound: fixed a rare one-way audio issue on CLASSOUND calls, which occurred due to incorrect processing of RTP Keep Alive by a remote carrier
Additional packages: ca-certificates_20200930, x-caracal_5.03.20210929.1, wildix-cw-5.03.20210930.1, sipproxy_5.3.6-5.03.20211001.1
[WMS-12270] - x-ca: fixed an issue in which Agent information was duplicated in x-caracal Agent reports if the Call group strategy was Call All 32
[WMS-12291] - sys: updated the SSL certificate to ensure correct work of Wildix services
[WMS-10957] - wms: updated API documentation in WMS to include all the available API endpoints
The up-to-date API documentation can be accessed via PBX and by the link: https://www.wildix.com/wp-content/wms-api/
[WMS-12172] - wms: added possibility to set QUEUE_FAST_RECALL as a Global Dialplan Variable
Using this variable, you can override the call group timeout in Call All 10/32 Call group strategy and send an incoming call to a user as soon as they become available.
How-to:
Note: To disable this option, change the value of the variable to “no”: QUEUE_FAST_RECALL=no.
If you delete the variable, the option won’t be disabled.
[WMS-12216] - sys: fixed an issue in which the option 6) Reset network settings in WMS -> Terminal -> console menu failed to be completed successfully
New WorkForce firmware v 65.145.6.15
[WP-41] - dev: fixed an issue with local IP DSCP Marking being not applied on WorkForce
[WP-148] - dev: fixed an issue in which microphone volume on WorkForce got much higher after WMS upgrade to 5.03
Additional packages: wildix-provision_5.03.20210915.1, wildix-lua-base_5.03.20210915.1, wildix-dialplan_5.03.20210915.1, wildix-cw-5.03.20210915.1, wms-wildixair-firmwares_5.03.20210914.1
[WMS-11941] - sys: improved the work of the ACL rule Cannot - See call recordings, preventing call recordings to be sent to user’s email in case SMTP client is configured on the PBX
[WMS-12139] - sys: fixed an issue when in some cases firmware update of W-AIR handsets failed after the PBX was upgraded from WMS version 5.02 to 5.03
[WMS-12140] - sys: fixed an issue in which after upgrade to WMS 5.03 BLF keys on WP phones didn’t display user’s presence status after a call was placed to this user
[WP-126] - dev: fixed an issue in which the default microphone volume on START handset was lower compared to other Wildix devices
[WMS-11233] - wms: fixed an issue in which the Call group notifications manager received a false missed call notification if a member of the Call group parked a call
[WMS-11664] - sys: fixed an issue when a user, unavailable on Away/ DND with Call Forward All set to Voicemail, didn’t get missed call notifications in call history if the caller hung up during user unavailable message
[WMS-11906] - sys: fixed an issue of an unexpected drop of a call with an external user, which was caused by broken data packets sent to PBX by an external provider
[WMS-12020] - dev: fixed an issue in which W-AIR Headset couldn’t update its firmware after upgrade to Beta 5.03.20210721.4
[WMS-11821] - wms: added possibility to activate x-caracal on a Virtual PBX
Requirements:
How to order x-caracal on WMP:
How to activate x-caracal in WMS:
Limitations:
x-caracal settings are not reset when: 1) resetting PBX to factory defaults or 2) when restoring from backup.
Learn more in x-caracal documentation: https://confluence.wildix.com/x/FAEzBQ
[WMS-11753] - sys: made the SMS service enabled by default for US/ Canada users after WMS upgrade to v. 5.03
The SMS service is activated by default if the following requirements are met during the upgrade:
[FXX-5] - dev: fixed an issue in which a device connected to FXS r3 didn’t get a busy tone when a caller ended a call
The issue affected FXS r3 gateways with firmware versions 27.81.10.15, 27.81.10.16, 27.19.10.15, 27.19.10.16.
[WMS-11959] - col: fixed an issue with CDR-View showing only records of the current user
[WMS-11767] - wms: added ACL rule “Can/ cannot - See call recordings”, which adds a possibility to restrict users from accessing call recordings
Limitations:
[WMS-11872] - x-ca: added possibility to integrate custom HTML code to x-caracal using Google Tag Manager
[WMS-11943] - wms: improved the process of contacts Import, so that automatic removal of contacts, which are no longer present in the database, doesn’t affect users that were added manually
Automatic removal of contacts applies, in case the option “Remove existing contacts which are not received from the backend“ is enabled. This improvement can be useful on big installations, where users are imported from an external source, and dummy (virtual) users with service licenses (e.g. part orbits, group managers, etc.) are created and kept locally.
[WMS-11824] - sys: fixed an issue in which email addresses containing a hyphen (-) could not be saved correctly in the Dialplan application Go to voicemail
[WMS-11882] - sys: fixed an issue when in some rare cases users on PBXs with WMS 5.02 version couldn’t see registered devices in Collaboration
New W-AIR firmware version 530b4
[WMS-11884] - dev: fixed issues 1) in which assigning/ deassigning users caused reboot of W-AIR SB r2 connected to Repeater r1 and 2) when in some cases in multi cell installations a W-AIR base station on TLS connection couldn’t register handsets until it was rebooted
New firmwares for WorkForce v 65.145.6.14 WP480GR3: v 63.145.10.35 WP490GR3: v 67.145.8.105 WelcomeConsole: v 68.145.2.40
[WP-104] - sys: fixed an issue in which WP phones occasionally closed TCP/TLS connection after resubscribing if a phone had a big number of configured BLFs, which could result in call drops, no media, or issues with BLFs
[WP-46] - dev: fixed an issue when in some cases it was impossible to place a call from the WorkForce call history or play voicemail if Wildix BT headset with Jabra Link 360/370 was enabled
[WMS-11768] - wms: added an option that overrides the timeout between calls in Call All 10/32 Call group strategy and sends an incoming call to a user as soon as they become available
To enable it, modify the Dialplan procedure used for the group, by adding Set -> QUEUE_FAST_RECALL -> yes/true before the Call group application.
When this option is activated, a user gets an incoming call without waiting till the Call group timeout is reached.
[WMS-11811] - col: improved filename format of the exported default CDR-View report, making it clearer what data it contains
The improved filename format applies to reports created with predefined filters. The filename includes the following information: name of the shared or personal report + chosen time frame (e.g. this month) + report generation date. For example: new_report_this_month_2021-08-17.csv
Custom reports (with filters manually adjusted in the Filter section) are exported with the default filename, e.g. cdr-view-2021-08-17.csv.
[WMS-11825] - wms: added possibility to create up to 100 paging groups
RTP multicast paging works for the first 10 groups only. If, say, a user belongs to 12 paging groups, paging of the first 10 groups is sent via RTP multicast, and paging of the rest 2 groups is sent via SIP calls.
Note: RTP multicast works only as long as the PBX and the devices are in the same network.
[WMS-11556] - wms: fixed an issue when in some cases tags and recordings were not available in CDR-View for calls routed via Callback
[WMS-11644] - x-ca: fixed an issue of incorrect visualisation of blind transfer calls in x-caracal, which displayed wrong events and a negative number in Talk Time
[WMS-11730] - sys: fixed an issue when in some rare cases it was impossible to make calls because of PBX engine memory consumption spike (additional fix)
[WMS-11930] - col: fixed an issue when in some cases, after a session was lost, the Remember me functionality did not work
Issue introduced in WMS 5.03.20210607.2 (Beta)
[WMS-11561] - col: made Collaboration user interface available in the Portuguese language
[WMS-11828] - dev: added possibility to centrally enable LLDP for WP phones
How-to:
Add the following parameters to the /rw2/etc/provision.conf file:
Note: The parameters are applicable only to [wildixp2] section and only for WP480/ 490 r3, WorkForce, WelcomeConsole
[WMS-11839] - col: made it possible to use letters in Postal Code when creating/ editing Phonebook contacts in Collaboration
[WMS-11191] - sys: fixed an issue when an outbound call didn’t overflow to consecutive trunks configured in a trunk group
[WMS-11728] - col: fixed an issue when contacts pasted from external sources like the Internet, Mac Address Book, etc. could not be saved in Collaboration Phonebook
[WMS-11770] - sys: fixed an issue with continuous increase of XMPP Server memory usage in case of heavy workload
New firmwares for WorkForce v 65.145.6.11 WP480GR3: v 63.145.10.34 WP490GR3: v 67.145.8.104 WelcomeConsole: v 68.145.2.39
[WP-21] - dev: released new WorkForce SDK that includes performance and stability improvements
[WP-39] - dev: fixed an issue with WorkForce freezing while using Jabra Engage 65 connected via USB
[WP-53] - dev: fixed an issue, when after receiving 408 or 500 error from SIP Proxy during subscription, WP phones didn't try to re-subscribe
[WP-66] - dev: fixed an issue when, in case of using TLS protocol, WP phones couldn’t make/accept calls after the connection with PBX was lost and restored for any reason
[WP-111] - dev: fixed an issue of bad audio quality on Start phones after the upgrade to WMS Beta version 5.03.20210730.1
SDES-SRTP was disabled for Start phones.
New FXO/ FXS r3 firmware v 27811016_0716
[WMS-11206] - dev: fixed an issue in which during a conversation on analogue phones, connected to W24FXS r3 gateway, users occasionally got unnecessary transferred calls
[FXX-2] - dev: fixed an issue when FXO/ FXS r3 gateways sent media to wrong endpoint after the transfer, if SDES-SRTP was enabled and the call was answered by the PBX
[FXX-4] - dev: added support for direct SDES-SRTP on W02FXSR3 and W04FXSR3 devices
Added possibility to disable the option for W02/04FXS/ W04FXO r3 via custom provisioning parameter: SRTPForceUse =yes|no (option is enabled by default).
Additional sections for the parameter SRTPForceUse were added: [wildixfxo3] and [wildixfxs2]. Documentation will be updated soon: https://confluence.wildix.com/x/KQg8AQ
[WMS-11766] - wms: added possibility to automatically assign user to PBX in a WMS network by mapping PBX name to a field within user import from LDAP
You can now find a new field called PBX in the Map section of the Import screen. Check it off in case you want to automatically add users to the relevant PBXs.
[WMS-11456] - sys: fixed an issue with old generation phones when there was no audio after semi-attended transfer of an external call to a user with 2 registered devices
[WMS-11241] - wms: added support for Microsoft 365 phonebook sync
How to enable the sync:
Note: Make sure you have imported/ synced Office 365 users.
It is possible to enable caller name lookup for Office365 contacts:
Note: By default, the lookup is disabled.
[WMS-11634] - wms: added possibility to activate x-caracal in WMS after purchasing the relevant service on WMP
Prerequisites:
How to activate x-caracal:
1. Get the relevant service on WMP
Note: the service can be purchased starting from 01.08.2021.
2. Enable x-caracal in WMS:
Note: Without the previously purchased service, the option to enable x-caracal in the WMS will not be available.
Usage in WMS Network:
[WMS-11598] - sys: fixed an issue when Collaboration and Wallboard lost connection to the PBX in case of multiple connections through a single user
[WMS-11735] - sys: fixed an issue with networking service failure on Cloud PBXs, which were upgraded to WMS v. 5.03.20210709
[WMS-11173] - dev: added support for direct SDES-SRTP on W04FXO r3
New firmware v 27811016.
[WMS-11381] - sys: fixed an issue with PBX engine memory consumption spike that led to impossibility to make calls
[WMS-11462] - wms: fixed an issue with Wildix logo missing when receiving Fax2Mail or Welcome message
[WMS-11519] - wms: fixed one way audio issue for calls to Collaboration/ WP phone via the UK VoIP operator
[WMS-11639] - sys: fixed an issue in which FXS media gateway couldn't receive fax from external number via CLASSOUND in some rare conditions
[WMS-11654] - sys: fixed an issue with PBX engine memory consumption spike that led to impossibility to make calls (additional fix)
[WMS-11689] - sys: fixed an issue in which calls dropped after 30 sec on WP phones due to Public IP address change on Cloud PBX
[WMS-11742] - sys: fixed an issue with Call group member who set DND/ Away user status being retrieved from pause after PBX engine restart
New W-AIR firmware version 0530b2
[WMS-11321] - dev: fixed an issue with call timer reset after receiving a second incoming call on W-AIR Handset
[WMS-8131] - sys: fixed an issue where in some rare cases a voicemail received from another user could end up in a hidden voicemail folder
[WMS-11123] - wms: fixed an issue in which dynamically added Call group members were removed after applying any changes to user preferences in WMS -> Users
[WMS-11208] - sys: fixed no media issue after attended transfer in case transcoding was enabled between codecs g729 -> g729 -> g711
[WMS-11554] - wms: fixed an issue with impossibility to call in Collaboration via Google Chrome v 93
[WMS-11591] - col: fixed an issue in which Office 365 SSO stopped working in Collaboration Native App after update to WMS v 5.03.20210623.2
[WMS-11722] - app: fixed an issue with mobile apps staying in reconnection state until the app is restarted
Issue introduced in WMS beta 5.03.20210715.1
[WMS-11283] - dev: enabled by default direct SDES-SRTP on Start phones
[WMS-11204] - sys: fixed no audio issue if a call received from a SIP trunk was transferred to a WP phone
[WMS-11292] - sys: fixed an issue when it was impossible to forward voicemails if a target extension consisted of only 2 digits
[WMS-11620] - dev: fixed an issue with the focus being switched from Collaboration tab after pressing the multifunction key on DuoLED-BT Headset
[WMS-11633] - sys: fixed an issue in which it was impossible to complete a transfer of a call placed via Peoplefone trunk
New firmwares for Workforce v 65.145.4.27, WelcomeConsole v 68.145.2.38, WP480R3 v 63.145.10.33, WP490R3 v 67.145.8.103
[WP-6] - sys: fixed an issue with audio being muted during first 2 seconds after attendant transfer/ call pickup on WP phones
[WP-14] - dev: fixed an issue with selected ringtone Ring5 on WorkForce producing clicking noise on incoming calls
[WP-72] - dev: fixed poor audio quality issue on WorkForce with firmware v 65.145.6.8
[WMS-10979] - col: added possibility to disable chats in Collaboration
How-to:
If disabled, users do not have access to Chat tab in Collaboration, including Chat and Post-It options in Colleagues, Feature keys, History tabs etc.
[WMS-11539] - sys: improved W-AIR upgrade logic to separate base stations and handsets/ headsets upgrade
[WMS-11568] - col: added possibility to automatically enable call control mode in Collaboration
[WMS-11593] - sys: improved the logic of storage cleaning tasks
If the available storage is less than 1 Gb after reaching 95-100% of total free space, cleaning tasks are launched.
[WMS-11236] - sys: fixed no media/ one way audio issue on a caller side after 5 minutes for calls placed via a SIP trunk with enabled SDES-SRTP
[WMS-11253] - sys: fixed an issue with mismatch of Serial and PBX ID licenses key for newly created HW/ VM PBXs
[WMS-11343] - sys: fixed an issue with impossibility to make calls from Zoho integration as Zoho call window remained in connecting state
[WMS-11392] - sys: fixed an issue in which SIP Proxy registration dropped and couldn't be renewed because of insufficient memory
[WMS-11428] - wms: fixed an issue in which dial by name stopped working after upgrade to WMS Beta 5.03
[WMS-11345] - sys: German language is now used for sounds playback for calls through Swiss and Austrian trunks
[WMS-8953] - wms: fixed an issue in which restart of ejabberd service after getting a new certificate could lead to Collaboration reconnection and temporary service unavailability
[WMS-11268] - sys: added a new provisioning custom parameter that allows increasing timeout for storing PIN for Voicemail menu on WP phone
How-to:
Once the set timeout is reached out, a user needs to re-enter PIN code
[WMS-9207] - wms: fixed an issue in which it was impossible to expand Dialplan included procedures list after collapsing it without selecting any procedure
[WMS-9931] - sys: fixed an issue with no Caller ID normalization if a call that arrived via IVR menu was transferred to another user
[WMS-11307] - sys: fixed an issue with Deutsche Telekom SIP trunk connection being lost after using call continuity feature
[WMS-11483] - sys: added a warning notification about service restart when changing default music on hold in WMS Settings -> PBX -> SIP-RTP
[WMS-11484] - sys: added a warning notification about service restart when saving settings in WMS Settings -> PBX -> Call and chat history
[WMS-10806] - col: added possibility to disable file transfer in Collaboration chat messages
To disable, edit the config file /rw2/etc/env.custom.ini by adding the parameter COLLABORATION_FILE_TRANSFER_ALLOW=false
[WMS-10949] - dev: W04FXO r3 improvements:
1. Added a new parameter Disconnection signaling to the Settings in WMS -> Trunks
Available options:
2. Polarity reversal detection renamed to Polarity reversal on answer
[WMS-11219] - x-ca: x-caracal improvements:
1. Added Users settings that allow a manager to assign specific Agents/ Queues to other supervisors for monitoring
Notes:
How-to:
Current limitation: a supervisor needs to log out/ in to Collaboration after a manager applies changes.
2. Added ACL "Can/cannot use CDR-View" check If a user has ACL "Cannot use CDR-View", there is no access to x-caracal.
[WMS-9769] - api: implemented API Trunks Price
API endpoints:
Documentation: <PBX>/api/v1/doc/#tag/Trunks-Price
[WMS-11318] - sys: added support for VoIP operator CompanyFlex by Deutsche Telekom
How to use:
1. Enable SDES-SRTP option. The transport has to be set to "auto". Additionally, outbound proxy usage is required, consult Deutsche Telekom documentation for that purpose.
2. Edit /rw2/etc/kamailio/host_specific_custom.cfg config file by adding the following line:
modparam("pv", "varset", "companyflex_trunks=s:(^trunkname1$)|(^trunkname2$)") |
where trunkname1 and trunkname2 are names of CompanyFlex trunks (field "Trunk name" in the trunk configuration page)
NOTE: companyflex_trunks is not just a string, it's a POSIX regular expression. Thus, it's better to use only lower and upper case letters and digits in trunk names. Otherwise, make sure that used symbols are not reserved in POSIX (or escape them). |
More examples:
modparam("pv", "varset", "companyflex_trunks=s:(^trunkname1$)")
modparam("pv", "varset", "companyflex_trunks=s:(^trunkname1$)|(^trunkname2$)|(^trunkname3$)")
[WMS-11187] - multiple security fixes
[WMS-10096] - dev: fixed an issue with vlan and syslog settings being not applied for FXO/ FXS r3 media gateways
[WMS-11090] - wms: fixed an issue with incorrect time value for records in CDR-View after upgrade to WMS 5.03
[WMS-11284] - wms: fixed an issue with Client PBX Public Port being not saved to LDAP after connecting to WMS network
[WMS-11335] - wms: fixed an issue with audio stream being not sent back to carrier randomly on incoming calls
[WP-70] - dev: rolled back WorkForce firmware to v 65.145.4.20 due to the found audio quality issues
[WMS-10819] - int: fixed an issue with impossibility to print documents using Fax Printer on Windows/ macOS
[WMS-11393] - wms: fixed an issue with internal server error appearing on API endpoints requests that used middlewareLogicalOr with alloForAdmin authorization
[WMS-11199] - col: added support for the Basque language in GUI
[WMS-11202] - wms: migrated from Google Contacts API to People API for importing contacts from Google accounts
[WMS-11274] - dev: NTP improvements for Wildix devices in case when they didn't receive NTP settings or received wrong settings via provisioning
[WMS-11327] - sys: improved W-AIR upgrade logic to avoid possible out of service
According to the new logic, W-AIR devices are updated gradually: first - bases, then - handsets/headset (previously, they were updated at the same time).
[WMS-11125] - wms: fixed an issue with "Announce date, time and caller phone number for Voicemail messages" option not working in WMS 5.02
[WMS-11157] - col: fixed an issue with call control mode not working if logging in to Collaboration with Office 365
[WMS-11322] - sys: fixed an issue with ACL permission "Can use CDR-View" being not checked when using x-caracal
[WMS-11193] - wms: renamed Wizyconf license to Wizyconf room
The changes are available in WMS:
[WMS-10556] - col: fixed an issue with Auto adjust mic option being active even if it was disabled in Web Phone settings
[WMS-10841] - sys: fixed 404 error issue during call recording playback of partial manually recorded calls from CDR-View/ Call history
[WMS-11289] - sys: fixed an issue with failed attempts to obtain SSH key on non-Cloud PBXs
[WMS-10805] - wms: added support for calendar sync with Office 365
How to enable:
[WMS-11216] - x-ca: x-caracal improvements:
[WMS-11143] - sys: added rules to restart x-caracal if the service is down
[WMS-10942] - col: fixed an issue in which call recordings for calls answered via mobility were not displayed in Collaboration history
[WMS-11161] - sys: fixed an issue with default NTP server being not set back automatically on a device if custom NTP server was removed from WMS manually
[WMS-11186] - sys: fixed an issue with RTPengine restart by monit in WMS network if all nodes had the same local IP address
[WMS-11255] - web: fixed an issue with wrong default value of "Use DST" parameter for WP phones
New firmwares for WP480R3 v 63.145.10.32, WelcomeConsole v 68.145.2.37, WP490R3 v 67.145.8.102
[WP-55] - dev: fixed an issue with Voicemail notifications not working on WP480R3 & WelcomeConsole & WP490R3
[WMS-11234] - wms: fixed an issue with AppStore mobile image being broken in Welcome Message
[WMS-11264] - sys: fixed an issue in which Call Group members were paused after Presence server/ PBX restart if "Unavailable on Away/DND" option was disabled
[WMS-11220] - wms: fixed an issue with impossibility to access Collaboration via Google Chrome v 91 if:
New firmware for WorkForce v 65.145.6.8
[WP-21] - dev: released new WorkForce SDK that includes performance and stability improvements
[WP-39] - dev: fixed an issue with WorkForce freezing while using Jabra Engage 65 connected via USB
Additional packages: wildix-cw-5.03.20210514.1, wildix-base_5.03.20210513.1~584f7348_all.deb
[WMS-10966] - sys: fixed an issue in which some applications were broadcasting error logs to all opened consoles
[WMS-11242] - sys: fixed an issue in which under rare conditions it was impossible to receive/ make calls, after wms release 5.02.20210416.1
[WMS-11086] - x-ca: x-caracal improvements and fixes
[WMS-10810] - sys: updated cored debian packages of the PBX to the latest version (including php of the web server, linux-kernel and many other dependencies and libraries)
[WMS-8500] - sys: fixed an issue in which call information could be lost under high load for Zoho CRM integration
[WMS-11011] - api: fixed an issue with predictive dialer failing to make calls with v2 webapi
The issue was reproduced due to an undefined variable that prevented Predictive Dialer from starting calls (both locally or using the online demo)
[WMS-11028] - sys: fixed an issue with calls being dropped after one hour
[WMS-11059] - sys: fixed an issue when user status didn't change to DND after pressing DND key on WP phone after PBX reset
[WMS-11082] - wms: fixed an issue with Company name being not imported from Google contacts if the source of sync was Zoho CRM
[WMS-11117] - sys: fixed an issue with ACL permissions being not checked when using simplified mail2fax method
[WMS-10553] - wms: improved CSRF protection
[WMS-10818] - col: fixed an issue when it was impossible to start screen sharing for the second time during one call
[WMS-10863] - app: fixed an issue with Android calls being dropped after 32 seconds if Internet connection was switched to IPv6 GSM operator
[WMS-10900] - col: fixed an issue in which postponed faxes couldn't be removed from a queue in Collaboration
[WMS-11051] - sys: fixed an issue with G729 transcoding not working for outgoing calls from Collaboration
[WMS-10454] - sys: added possibility to deliver Kite group chat requests to all call group members simultaneously
To enable, edit the config file /rw2/etc/ejabberd/ejabberd_mod_wildix_kite.yml by changing the following values for pickup_strategy parameter:
[WMS-10554] - col: added possibility to allow the second Collaboration tab in call control mode for media devices when connecting via remote desktop
[WMS-7761] - col: added support for the US standard date format "mm/dd/yyyy" in CDR-View
[WMS-8631] - sys: routed Directory sync protocol outside of WMS network
[WMS-9768] - api: API Dialplans refactoring
[WMS-10259] - wms: improvement for SMTP client w-smtp.wildix.com: now it is impossible to change the default email in order to prevent mails to be marked as spam
[WMS-10325] - sys: increased configured pool size for large databases on Cloud PBX
[WMS-10532] - sys: implemented TLS 1.2 which is enforced for new installations and after PBX reset
[WMS-10749] - col: added possibility to set Available custom status in Collaboration -> Settings -> Chat / Presence
[WMS-10797] - sys: added possibility to send missed calls notifications via email to a Call group notifications manager
[WMS-9968] - col: fixed an issue when it was impossible to share screen to more than one user in Collaboration
[WMS-10180] - col: fixed an issue in which Collaboration app didn't switch to Failover PBX after Primary PBX was powered off
[WMS-10211] - sys: fixed an issue in which devices couldn't subscribe via SIP in Failover mode
[WMS-10292] - col: fixed an issue with Collaboration reconnecting in the loop after starting a laptop/ PC
[WMS-10426] - wms: fixed an issue with the option "Attach files with records to emails" remaining enabled after disabling the option "Send mail notification after the record is complete" in WMS Dialplan -> General Settings
[WMS-10481] - sys: fixed an issue with system temporary files being not cleaned up when some external network storages were used
[WMS-10560] - sys: fixed an issue when it was impossible to set a password for a user on Client PBX in WMS Network
[WMS-10583] - wms: fixed an issue when Salesforce integration lost connection with Collaboration in some cases
[WMS-10650] - col: fixed an issue with partial load of user pictures in WMS Network
[WMS-10672] - sys: improved log files rotation in /var/log/*.log folder
[WMS-10909] - dev: fixed an issue with WP phones R3/4 being not automatically upgraded when network connection was slow
[WMS-10767] - dev: new W-AIR firmware version 0530b1:
Additional packages: wildix-base 5.02.20210420.1 wildix-lua-base 5.02.20210420.1 wildix-dialplan 5.02.20210420.1 wildix-provision 5.02.20210420.1 x-caracal_5.02.20210420.2
[WMS-10849] - sys: fixed an issue with impossibility to configure BLF keys if they started with extension numbers of monitored users
[WMS-10656] - col: added support for x-caracal
For activation, refer to the document: https://confluence.wildix.com/x/FAEzBQ.
[WMS-10931] - wms: fixed an issue with incorrect URL mapping for admin users that caused redirection to Collaboration after opening some menus under WMS Settings
Additional packages: wildix-cw-5.02.20210415.1, sipproxy_5.3.6-5.02.20210414.1, wildix-provision_5.02.20210413.1, wildix-dialplan_5.02.20210413.1, wildix-lua-base_5.02.20210413.1, wms-wildixair-firmwares_5.02.20210414.1
[WMS-8663] - sys: fixed an issue in which a Call Group member stopped receiving CG calls if Force Call Forward was enabled to an external number and answered from that number
[WMS-10854] - dev: fixed an issue with impossibility to upgrade W-AIR Sync Plus Base firmware from v 04.50.0013 to the latest 05.20.0001
[WMS-10959] - sys: fixed an issue in which SIP Proxy couldn't start in some rare conditions on Cloud PBXs under small installations
W-AIR Headset firmware v 0305_b054
[WMS-10356] - dev: fixed an issue in which W-AIR Headset played "Zero" every 20 seconds when muted in an audio conference
[WMS-10872] - wms: added a warning message showing license overuse while creating, editing or importing users
[WMS-10763] - sys: fixed an issue with negative talk time and wrong status in CDR-View for blind transferred outgoing calls
[WMS-10878] - sys: fixed no audio issue in some cases for calls in WMS network after upgrade to WMS 5.02
issue reproduced in case one of the involved devices was an old generation WP or a W-AIR phone
[WMS-10880] - sys: fixed no audio issue after semi attended transfer of a call received from a SIP trunk and being transferred from WP4X0 to a user with 2 registered devices
[WMS-10892] - sys: fixed an issue in which music on hold stopped working after resetting the PBX via the Terminal
[WMS-11025] - fixed an issue with calls to the conference service from the PBX (via feature code) being dropped after 10 minutes
Issue introduced in WMS 5.02.20210402
[WMS-9937] - sys: fixed an issue with incorrect behavior of TAPI driver when extra events were created in case of call transfers
[WMS-10462] - wms: fixed an issue with direct access to devices not working via https connection
[WMS-10834] - wms: fixed an issue with broken Chrome extension image in Welcome Message email
[WMS-10909] - dev: fixed an issue with WP phones R3/4 being not automatically upgraded when network connection was slow
Additional packages: wildix-cw-5.02.20210326.1 wildix-provision_5.02.20210329.1 wildix-dialplan_5.02.20210329.1 wildix-lua-base_5.02.20210329.1 wms-wildix2-firmwares_5.02.20210329.2
[WMS-10812] - wms: added possibility to continue recording of an outgoing call after it was transferred to another user
New WorkForce firmware v 65.145.4.20
[WP-45] - dev: fixed an issue with Voicemail notifications not working on WorkForce
[WMS-9952] - col: fixed an issue with impossibility to export charts in CDR-View
[WMS-10535] - wms: fixed an issue with wrong user statuses on WelcomeConsole with a large amount of configured BLF keys (> 50) due to 500 Server Internal Error
[WMS-10720] - sys: fixed one way audio issue if a call was placed from Collaboration/ Vision/ SuperVision to W04FXS r3 with enabled SRTP
[WMS-10827] - sys: fixed an issue with PBX engine being restarted by monit in some rare conditions after upgrade to WMS 5.02
[WMS-7872] - dev: added possibility to set image refresh button for 2N intercom integration
The feature allows updating image streaming on W-AIR Handsets via a button. To set the button, configure the following Dialplan:
Updated documentation https://confluence.wildix.com/x/qADwAQ.
W-AIR firmware version 0520b1 for W-AIR Base Sync Plus, W-AIR Base, W-AIR Base, Small Business, W-AIR Basic, W-AIR LifeSaver, W-AIR Med, W-AIR Office
[WMS-10603] - col: fixed an issue in which current versions of some extensions in Collaboration Settings were not updated to the latest version
[WMS-10844] - sys: fixed an issue with incoming calls being dropped if they were received from IP of a trunk with enabled outbound proxy
[WMS-10742] - sys: fixed an issue with an option "Play" being inaccessible from Voicemail menu for shared voicemails on WP phones
[WMS-10798] - col: fixed an issue with Collaboration Native App v. 2.1.6 not working after upgrade to WMS 5.02
[WMS-10803] - sys: fixed an issue in which calls over Paging dropped due to PBX engine deadlock in some cases
[WMS-10400] - wms: fixed an issue with no audio stream from PBX to remote WP phone on incoming calls that were handled via IVR menu and routed to a Call group
[WMS-10416] - sys: fixed an issue when a user couldn't pick up a call of another user who was already in call (it could be one-to-one call, an audio conference or a service call to Feature codes)
[WMS-10625] - wms: fixed an issue with impossibility to modify RTP ports in Settings SIP-RTP
[WMS-10696] - sys: fixed an issue with RTP ports being not released after call completion
[WMS-10737] - sys: fixed an issue with presence statuses on WP phones being displayed incorrectly for users with unregistered devices or after PBX engine restart
[WMS-10424] - col: notifications about availability of new versions are now not shown for WIService and other integrations with enabled auto-update option
[WMS-10693] - dev: fixed an issue when it was impossible to pick up a call by pressing a BLF key for users with an ACL rule "Cannot - View calls of users"
[WMS-10470] - wms: fixed an issue with user status being changed for those users who answered a call via mobility and had no active devices
[WMS-10663] - col: added lazy (deferred) loading of images in Collaboration to reduce unnecessary network load
This version is the Stable Release Candidate. Starting from March 01 each region/ country will gradually get access to WMS 5.02 Stable upgrade, the schedule will be announced later. Repository to upgrade: rel50rc. The full list of tickets: WMS Stable Changelog rel50. |
[WMS-10514] - sys: fixed an issue with SIP Proxy periodic restart
[WMS-10520] - sys: fixed an issue with WebRTC Kite user not hearing audio from Collaboration user once a video call was established between them
Issue reproduced in WMS 5.02
[WMS-10529] - sys: fixed an issue with impossibility to update W-AIR firmware after upgrading PBX to WMS v. 5.02.20210127.1
[WMS-10589] - sys: fixed an issue with one-way audio after putting a call on hold and resuming, between calls in WMS network using Collaboration
[WMS-10614] - wms: fixed an issue with no audio after putting a call on hold and resuming on WP480GR3/WP490GR3/WelcomeConsole/WorkForce in some cases
Issue reproduced in case SDES-SRTP settings were disabled in custom config file
[WMS-10646] - sys: fixed an issue with impossibility to provision W-AIR bases after upgrade to WMS v.5.02.20210217.2
New firmwares for WP410R2 v. 50.145.6.174, WP480GR3 v. 63.145.10.31, Workforce v. 65.145.4.18, WP490GR3 67.145.8.101, WelcomeConsole 68.145.2.35
[WP-24] - sys : fixed an issue with random one-way audio after resuming a call on hold with enabled SRTP
[WP-26] - dev: fixed an issue with USB headset mic volume level on WorkForce being not changed if adjusting parameter Headset Mic Volume on the phone's web interface
[WP-36] - dev: new firmware for WorkForce v. 65.145.4.18 includes fixes:
Additional packages: wildix-provision 5.02.20210219.1 wildix-dialplan 5.02.20210219.1 wildix-lua 5.02.20210219.1
[WMS-10646] - sys: fixed an issue with impossibility to provision W-AIR bases after upgrade to WMS v.5.02.20210217.2
[WMS-10385] - wms: optimized PHP worker memory limit
[WMS-9548] - sys: fixed a problem with outgoing calls being dropped with certain trunk providers
[WMS-10453] - col: fixed an issue in which system message about WebRTC Kite chat request being handled by another agent disappeared after Collaboration reload
Issue reproduced in WMS 5.02
[WMS-10480] - wms: Improved protection against cross-site scripting (XSS) attacks
[WMS-10490] - wms: fixed an issue in which SMB v1 share failed to remount
[WMS-10520] - sys: fixed an issue with WebRTC Kite user not hearing audio from Collaboration user once a video call was established between them
Issue reproduced in WMS 5.02
[WMS-10527] - dev: fixed an issue when after setting America/ Canada timezone on W-AIR Base, country settings changed to Italia
[WMS-10551] - col: increased the width of drop-down list showing live search results in Collaboration
[WMS-10589] - sys: fixed an issue with one-way audio after putting a call on hold and resuming, between calls in WMS network using Collaboration
[WMS-10614] - wms: fixed an issue with no audio after putting a call on hold and resuming on WP480GR3/WP490GR3/WelcomeConsole/WorkForce in some cases
Issue reproduced in case SDES-SRTP settings were disabled in custom config file
[WMS-10478] - col: fixed an issue with cyclic fetch of phonebook avatars after receiving an error (e.g. unavailable user on remote PBX)
[WMS-10514] - sys: fixed an issue with SIP Proxy periodic restart
[WMS-10573] - col: fixed an issue with impossibility to install/ update extensions in Collaboration Settings through a popup notification
[WMS-10262] - wms: fixed an issue when it was impossible to re-save Dialplan procedure after adding "Voicemail access" application
[WMS-10352] - sys: fixed an issue with presence statuses on WP phones being displayed incorrectly for users with unregistered devices
[WMS-10529] - sys: fixed an issue with impossibility to update W-AIR firmware after upgrading PBX to WMS v. 5.02.20210127.1
[WP-36] - dev: new firmware for WorkForce v. 65.145.4.18 includes fixes:
[WMS-10570] - col: fixed an issue with CDR-View not working after the upgrade to WMS Beta 5.02.20210203.2
[WMS-10101] - col: implemented the new logic for extensions update in Collaboration Settings -> Extensions: now new versions are obtained directly from Collaboration, regardless of updating WMS version
Note: notifications about availability of new versions will be implemented in one of the next versions.
Additional package: wms-wildix2-firmwares 5.02.20210202.1
[WMS-10540] - sys: fixed an issue with delivery of wrong versions of firmwares for WP phones
This version is the Stable Release Candidate. Starting from March 01 each region/ country will gradually get access to WMS 5.02 Stable upgrade, the schedule will be announced later. Repository to upgrade: rel50rc. |
[WMS-10112] - wizy: added possibility to set a conference password
Documentation: Wizyconf Videoconference - User Guide WMS 5, Wizyconf Station Quick Start Guide.
[WMS-10267] - wms: added support for integration with Feelingstream platform for voice recognition and call recordings in stereo format
Requirements:
To enable the integration:
Create the config file /etc/feelingstream.conf with parameters:
host=wildix.feelingstream.com apikey=fcd4206d-aaab-56cb-bdc8-a33dc4611a4b_ab30ac63-1234-1234-1234-123456789012 bucket=call lang=en |
Where:
Note: Stereo mode can be activated separately on any PBX, without the integration.
[WMS-10313] - wms: fixed an issue with tooltip indicating trunk registration status being not displayed when hovering over a specific trunk in WMS -> Trunks
[WMS-10514] - sys: fixed an issue with SIP Proxy periodic restart
[WMS-10520] - sys: fixed an issue with WebRTC Kite user not hearing audio from Collaboration user once a video call was established between them
Issue reproduced in WMS 5.02
[WMS-10529] - sys: fixed an issue with impossibility to update W-AIR firmware after upgrading PBX to WMS v. 5.02.20210127.1
[WMS-10589] - sys: fixed an issue with one-way audio after putting a call on hold and resuming, between calls in WMS network using Collaboration
[WMS-10614] - wms: fixed an issue with no audio after putting a call on hold and resuming on WP480GR3/WP490GR3/WelcomeConsole/WorkForce in some cases
Issue reproduced in case SDES-SRTP settings were disabled in custom config file
[WMS-10646] - sys: fixed an issue with impossibility to provision W-AIR bases after upgrade to WMS v.5.02.20210217.2
New firmwares for WP410R2 v. 50.145.6.174, WP480GR3 v. 63.145.10.31, Workforce v. 65.145.4.18, WP490GR3 67.145.8.101, WelcomeConsole 68.145.2.35
[WP-24] - sys : fixed an issue with random one-way audio after resuming a call on hold with enabled SRTP
[WP-26] - dev: fixed an issue with USB headset mic volume level on WorkForce being not changed if adjusting parameter Headset Mic Volume on the phone's web interface
[WP-36] - dev: new firmware for WorkForce v. 65.145.4.18 includes fixes:
[WP-37] - dev: fixed an issue in which Workforce firmware upgrade from v. 65.145.2.18 to v. 65.145.4.12 got stuck at ~ 10%
[WMS-10447] - wms: fixed security vulnerability issue with cross-site scripting (XSS) attacks
[WMS-10458] - sys: fixed an issue with TTS not working with Dialplan applications Play sound and Dial by name in some cases
Additional packages: wildix-cw 5.02.20210120.2 rtpengine 8.3.1-5.02.20210120.1wildix-lua-base 5.02.20210119.1 wildix dialplan 5.02.20210119.1 wildix-provision 5.02.20210119.1
[WMS-10355] - sys: fixed an issue in which calls dropped after 10 minutes due to missing Session-Expires Timer in UPDATE messages by adding a custom parameter session_expire_header_in_update
The parameter is disabled by default. To configure it:
[WMS-10376] - sys: fixed PBX engine crash issues in some rare cases
[WMS-10379] - sys: fixed one way audio issue after resuming a call on hold that lasted > 11 min
Additional packages: wildix-cw 5.02.20210115.1 sipproxy 5.3.6-5.02.20210115.1 wildix-lua-base 5.02.20210115.1 wildix dialplan 5.02.20210115.1 wildix-provision 5.02.20210115.1
[WMS-10397] - sys: fixed an issue with impossibility to provision devices on newly created Cloud PBXs
[WMS-10359] - col: fixed an issue with Function keys being not displayed in Collaboration if "Voicemail" Function key was configured for deleted user after upgrade to WMS 5.02
[WMS-10339] - sys: added parameter allowing WelcomeConsole/ WP490 users with configured BLF “Colleague” not to receive updates for status changes of “call all 10/ 32” call groups members
Previously users who had many BLF keys configured for call group members received too many status updates in case of calls to groups with the strategy “Call All” (for “Call All 32" strategy disabled by default)
New parameter added, allowing you to globally turn off early status updates (such as “ringing”, “cancelled”,) for members of call groups “Call All 10/ 32”.
Note: "ringing" status was already disabled for Call All 32, but after activating the feature, other early statuses are disabled.
In this case, subscribed users will only receive an update to the BLF when the call has been answered by one of the call group members, but they will not receive updates for “ringing”, “canceled” etc.
Limitation: in case call group members belong to a different PBX in the WMS network, subscribed users will still receive all the status updates.
How to enable (feature is disabled by default):
If feature is enabled, default devices mask is:
modparam("pv", "varset", "device_presence_skip_event_dialog=s:(Wildix WP490GR[3|4])") |
It can be changed in /etc/kamailio/cfg.d/host_specific_custom.cfg.
[WMS-10215] - sys: fixed an issue with no audio for 10 seconds after answering a call from BRI/ PRI gateway and transferring it to user with mobility
[WMS-10343] - sys: fixed an issue with SIP trunk being not correctly deleted leading to incorrect trunk matching
[WMS-10380] - sys: fixed an issue with no audio/ one way audio for calls answered by the pbx (e.g. ivr or dialplan rule), which involved a device that doesn’t support “refer” (fxo/ fxs gateway)
Additional package: wildix-rtpengine 8.3.1-5.02.20201231.1
[WMS-10377] - sys: fixed a problem with one way audio in some cases after turning on call recording in WMS beta 5.02.20201228.4
New firmwares for WP480 r3 v. 63.145.10.30, WP490 r3 67.145.8.100, WorkForce v. 65.145.4.12, WelcomeConsole v. 68.145.2.33
[WP-3] - dev: added support for Wi-Fi dongle (available in 2021) on Workforce phones
Documentation already available:
[WP-30] - dev: fixed an issue with WP r3/ r4 getting slow after the latest FW upgrade, in case high number of BLF keys were configured
[WMS-9862] - wms: added auto refresh of licenses on pbxs from wmp
[WMS-10190] - sys: fixed an issue in which system call recording stopped after call was answered via mobility
[WMS-10240] - col: fixed an issue with user pic from previous chat displayed after switching to a new chat for some time in some cases
[WMS-10260] - wms: fixed an issue with changes of ntp serves not being applied on wms5
[WMS-10079] - app: TAPI driver v. 1.2.4 adds possibility of silent installation and provides msi package
How to install/uninstall silently from the Command line:
1. Install:
2. Unistall:
[WMS-10186] - sys: added option to enable SDES-SRTP for SIP trunks
The option is configured under SIP trunk settings menu in WMS -> Trunks.
[WMS-9502] - sys: fixed an issue in which recording of an incoming call started via Diaplan stopped after being transferred to a mobile number
[WMS-10232] - wms: increased the max number of characters recognised by TTS service up to 800
[WMS-9791] - sys: fixed an issue with DTMF tones not working for an outgoing call via BRI/ PRI media gateways
[WMS-10247] - sys: fixed an issue in which WebAPI integration stopped working after upgrade to WMS v. 5.02.20201015.2 due to the new version of JS library
[WMS-9323] - sys: fixed an issue in which return from semi-attended transfer didn't work in Collaboration if a transferee refused a call
[WMS-10184] - sys: fixed no audio issue after semi-attended transfer of a call between 2 WP4X0 phones that was received from WMS Network
[WMS-10188] - sys: fixed an issue with calls to Feature Codes "Make Up Room" 771 and "Wake up call" 773 being rejected upon initial setup
[WMS-10078] - col: improved Outlook integration: the option "Enable calendar sync" is now disabled by default for new users
[WMS-8692] - sys: fixed one way audio issue after resuming a call on hold that lasted > 11 min
Additional packages: wildix-cw 5.02.20201214.2 wildix-provision 5.02.20201215.1 wildix-dialplan 5.02.20201215.1 wildix-lua 5.02.20201215.1
[WMS-10200], [WMS-10214] - sys: fixed an issue when incoming calls from a trunk dropped after transfer in case of customized Contact Header
Additional package: wildix-cw 5.02.20201214.1
[WMS-8502] - sys: fixed an issue in which a call placed to a Call group couldn't be transferred from Collaboration if a caller had mobility feature enabled
[WMS-10087] - wms: fixed an issue with poor audio quality after attendant transfer of a call placed to a Call group that contained "queue() rule and c flag" in Dialplan
Additional package: wildix-sipproxy 5.3.6-5.02.20201210.1
[WMS-10265] - sys: fixed an issue in which calls via German VoIP operator Deutsche Telekom SIP Anlagenanschlußoperator dropped while being transferred
[WMS-9671] - sys: added possibility to get location of the nearest W-AIR Base Station in case of emergency alarm triggered on W-AIR Handset
[WMS-10027] - col: added support for Wizywebinar in Collaboration
Quick Start Guide: https://confluence.wildix.com/x/W4PPB
[WMS-10048] - wms: added possibility to enable reporting of user statutes for external calls
Notes:
How to enable:
1. Set Global Dialplan variable REPORT_USER_STATUS_FOR_EXT_CALLS=all in WMS -> Dialplan -> General Settings
Possible values:
2. Set language En or En-us in Dialplan procedure used for managing external calls
[WMS-10157] - sys: enabled by default weekly automatic upgrade for the Stable repository
Important notes!
[WMS-9571] - wms: fixed an issue in which Popup URLs couldn't get call tags
[WMS-9959] - sys: fixed an issue with Caller ID being not updated after transferring an incoming call to a Zoho user
[WMS-10104] - sys: fixed one way audio issue when a Collaboration user picked up an internal call between 2 W-AIR users
[WMS-10119] - sys: fixed an issue in which Mail2SMS notification email didn't contain any information
[WMS-10154] - wms: fixed an issue with a call being dropped after a user picked it up via FC "Pickup" 88 on WP phone
[WMS-10211] - sys: fixed an issue in which devices couldn't subscribe via SIP in Failover mode
New W-AIR firmware version 0501b5
[WMS-9873] - dev: fixed an issue with W-AIR Base Stations restart on each SIP login or logout
[WMS-10158] - sys: enabled by default SDES-SRTP for WP410 r2
[WMS-10153] - sys: fixed an issue in which connection for Callback URL requests was established via TLS v 1.0 instead of v. 1.2
[WMS-10174] - sys: fixed one way audio issue in case an external outgoing call was placed from WP410 r2 via BRI/ PRI trunk with enabled SDES-SRTP
[WMS-9658] - sys: fixed an issue with Google login not working for users import
[WMS-10103] - col: fixed an issue in which Collaboration reconnected in an infinite loop after trying to send a chat message that contained some currency symbols
[WMS-10161] - sys: fixed an issue with calls via PRI media gateway pre 2017 not working after upgrade to WMS 5.0 from WMS 3.88
[WMS-10175] - sys: fixed an issue with incoming calls via SIP trunk not working if Outbound proxy was set and domain was unresolvable
[WMS-9987] - app: WIService v. 3.1.2 (Windows) includes:
[WMS-8220] - wms: fixed an issue with analog ports being ordered incorrectly in WMS -> Devices
[WMS-10023] - col: fixed an issue with "Unavailable on away / dnd" option of Contact center feature being disabled after editing user preferences in WMS
[WMS-10077] - wms: fixed several regressions after Dialplan page refactoring:
[WMS-10102] - app: WIService v. 3.1.2 (macOS) fixes an issue with impossibility to generate a call using click2call feature in Firefox browser
[WMS-10155] - sys: fixed an issue with incorrect display of presence statuses for monitored users on WelcomeConsole with a large amount of configured BLF keys (> 50) in WMS Network
Additional packages: wildix-provision wildix-dialplan wildix-lua-base 5.02.20201118.1
[WMS-10162] - sys: fixed an issue in which WP4X0 r3, WelcomeConsole and WorkForce couldn't be auto-provisioned after upgrade to WMS Beta v. 5.02.20201116.5
[WMS-9865] - sys: implemented call group notification manager feature for Collaboration (ref. ticket for the initial implementation WMS-6761)
To view missed calls and voicemails notifications:
[WMS-10036] - wms: increased security requirements for credentials in WMS network: now it is only possible to automatically generate credentials, without manual editing
Warning: admin has to regenerate Server PBX credentials in Settings -> PBX -> WMS network -> click "Generate credentials". After completing, update credentials also for all Client PBXs in WMS Network. If credentials are not updated, WMS Network will stop working starting from WMS v. 5.03.
[WMS-9897] - sys: fixed an issue in which all users couldn't use Collaboration at the same time because PBX didn't accept connections
[WMS-9904] - sys: fixed no audio issue after semi-attended transfer for calls in WMS Network
[WMS-9911] - wms: fixed an issue with Mail2SMS not working after upgrade to WMS 5 due to the new auth method preventing SMS authorization
[WMS-9982] - sys: fixed a rare issue with audio being interrupted during long calls via FXO trunk
[WMS-9990] - app: Wildix Outlook Integration component v. 2.5.7 fixes an issue with the list of calendars to sync being empty
[WMS-10033] - sys: fixed an issue with incorrect display of presence statuses for monitored users on WelcomeConsole with a large amount of configured BLF keys (> 50)
New firmwares for WP480 r3 v. 63.145.10.24, WP490 r3 67.145.8.96, WorkForce v. 65.145.4.3, WelcomeConsole v. 68.145.2.31
[WP-10] - dev: fixed an issue in which a BLF key containing a user name "Held" for German users was translated into "Gehalten" during active calls
[WP-13] - dev: fixed an issue with no busy tone being played during outgoing calls on WP phones
[WP-23] - dev: fixed an issue with sidetone feature not working on WorkForce
[WMS-9978] - dev: added a new parameter "Obtain FSK CID from" for W04FXO r3 media gateway settings to display correct Caller ID
The default value depends on a language selected in WMS Settings -> PBX -> Language&Region:
Note: After updating your PBX, you need to re-save W04FXO r3 settings in WMS -> Trunks.
[WMS-10001] - app: WIService v. 3.0.11 (Windows) fixes an issue in which a security permission notification was displayed for another user after switching accounts
[WMS-10055] - sys: fixed an issue with failure of adding a new Windows share in WMS Settings -> System -> Storages
[WMS-9012] - sys: added support for W-AIR Small Business Base R2 (available in early 2021)
Documentation: W-AIR Small Business - Admin Guide, W-AIR System Datasheet
[WMS-9965] - sys: implemented per-user license check: only users with Premium licenses can now manage Call groups via WebAPI Wallboard
[WMS-9668] - sys: fixed an issue with DTMF not working after resuming a call from hold if a caller's VoIP operator sent DTMF tones via payload type 96
[WMS-9953] - sys: fixed an issue when it was impossible to enable Syslog Server on FXO r3 media gateways after provisioning
[WMS-10080] - sys: fixed an issue with RTP engine restart due to high CPU load during calls in WMS Network
[WMS-10042] - app: WiService v. 3.0.10 (macOS) includes fixes:
[WMS-9983] - dev: fixed an issue with dropped calls due to wrong TCP Keep-Alive value inside W-AIR configuration
[WMS-9989] - sys: fixed an issue when a call placed using "Identities" feature failed if a callee set call forwarding to a Call group
[WMS-10008] - sys: fixed an issue when it was impossible to log in to Collaboration (page remained loading endlessly) in some cases after upgrade
[WMS-10015] - wizy: fixed an issue in which scheduled time couldn't be changed correctly when creating or editing a video conference
[WMS-10017] - app: Fax Printer v. 3.1.5 (Windows) fixes an issue when the component wasn't available in Printer selection on Windows starting with Fax Printer v. 3.1.2
[WMS-10024] - app: WiService v. 3.0.9 (Windows) fixes an issue with missing data (calls, periods etc) in CDR-View
[WMS-10031] - sys: fixed an issue in which Zabbix agent update led to removal of custom setting
[WMS-9170] - wms: fixed an issue with impossibility to use 0 as a called number in Diaplan procedures
[WMS-9880] - sys: fixed an issue with PBX engine processing that caused high memory usage
[WMS-9474] - sys: added support for "call through remote pbx" Dialplan application in failover scheme
[WMS-9767] - wms: added call groups API
[WMS-9773] - wms: refactoring of trunk groups page
[WMS-9988] - app: WiService v. 3.0.8
[WMS-8421] - sys: fixed an issue in which calls from remote PBX to “Identities” extension number did not go through
[WMS-9903] - sys: fixed impossibility to redial from call history for external calls made using “Identities” feature
New W-AIR firmware version 0501b001 for W-AIR Headset
[WMS-9811] - dev: fixed an issue with attended and unattended call transfer
Additional package: sipproxy package 5.3.6-5.02.20201020.1
[WMS-9973] - sys: fixed shared memory leak in SIP proxy package introduced in WMS v. 5.02.20201015.2 (previous beta)
[WMS-6761] - sys: implemented call group notification manager allowing users to subscribe to receive notifications about missed calls and VM notifications for call groups (currently implemented for WP480G 2017 / WP490G 2017/ WelcomeConsole / WorkForce)
[WMS-7551] - sys: added support for online streaming of mp3 http/ https sources as music on hold
How-to:
Add the following parameter to the config file /rw2/etc/callweaver/musiconhold-stream.conf:
[radio] mode=custom application=/usr/sbin/cw_play_http_stream.sh http://stream.104.6rtl.com/rtl-live/mp3-192 |
where "http://stream.104.6rtl.com/rtl-live/mp3-192" is your stream source:
Run the command:
rcallweaver -rx "moh reload" |
[WMS-8152] - wms: added support for client to server authorization for using API on a PBX (oAuth2)
Note: According to rfc6749 section 4.2
Important! oAuth2 provides a new WebAPI JS library. It is recommended to use it in order to ensure more secure performance of your integrations.
Developer's Documentation: https://www.wildix.com/webapi/v2/demo/doc/. |
[WMS-8508] - sys: implemented encryption of Remote syslog server & PBXs connection to Wildix logging server(s)
[WMS-9331] - sys: added system sounds in Swedish language
[WMS-9822] - col: added possibility to integrate custom HTML code to Collaboration by using Google Tag Manager
How to implement:
Create a new config file "template.conf" including GTM ID, for example, use the command:
echo 'gtm=GTM-12345678' > template.conf |
where "123445678" is GTM ID
after the <HEAD> section
<!-- Google Tag Manager -->
<script>(function(w,d,s,l,i){w[l]=w[l]||[];w[l].push({'gtm.start':
new Date().getTime(),event:'gtm.js'});var f=d.getElementsByTagName(s)[0],
j=d.createElement(s),dl=l!='dataLayer'?'&l='+l:'';j.async=true;j.src=
'https://www.googletagmanager.com/gtm.js?id='+i+dl;f.parentNode.insertBefore(j,f);
})(window,document,'script','dataLayer','GTM-XXXX');</script>
<!-- End Google Tag Manager --> |
after the <BODY> section:
<!-- Google Tag Manager (noscript) --> <noscript><iframe src="https://www.googletagmanager.com/ns.html?id=GTM-XXXX" height="0" width="0" style="display:none;visibility:hidden"></iframe></noscript> <!-- End Google Tag Manager (noscript) --> |
[WMS-6719] - sys: added 03, 030, 0345 prefixes to "National" and 084 prefix to "Premium" call classes for the UK to improve call class recognition and for the correct management of ACL permissions
[WMS-8243] - dev: added support for STRP on W02FXS r3 and W04FXS r3
[WMS-8447] - wms: optimized the option to configure/ sync device (WMS -> Devices) for systems with large amount of devices
[WMS-8513] - sys: improved security related to SIP subscriptions
[WMS-8775] - wizy: improved the management of calendar events for recurrent video conferences
[WMS-9073] - wms: improved the logic of repository selection during auto-update
[WMS-9177] - sys: deprecated the functionality of logging in to another PBX different from LDAP using FC "Login" 99
[WMS-9248] - wms: refactoring of Call groups page in WMS -> Dialplan
[WMS-9251] - wms: refactoring of Paging Groups page in WMS -> Dialplan
[WMS-9252] - wms: refactoring of Timetable/ Switch page in WMS -> Dialplan
[WMS-9253] - wms: refactoring of Feature codes page in WMS -> Dialplan
[WMS-9254] - wms: refactoring of General Settings page in WMS -> Dialplan
[WMS-9255] - api: IVR improvements:
[WMS-9257] - wms: refactoring of Generate trace page in WMS Settings -> Tools and utilities
[WMS-9261] - wms: refactoring of Remote syslog page in WMS Settings -> System
[WMS-9466] - col: the option "Send SMS" is no longer available from the top menu (under +) if restricted by ACL
[WMS-9601] - api: implemented API for DTMF
[WMS-9642] - wms: implemented API for Dialplan General Settings
[WMS-9647] - col: improvements for Video Conference dialog in Collaboration:
[WMS-9664] - sys: added full support for static Call groups monitoring via WebAPI Wallboard
[WMS-9737] - sys: added possibility to block sharing geolocation on PBX
How to implement:
Edit the file/rw2/etc/ejabberd/ejabberd_mod_wildix_presence.yml by modifying the parameter allow_location and set it to false:
allow_location=false |
/etc/init.d/ejabberd restart |
Notes:
[WMS-9786] - wms: added possibility to set >255 Timetables, Switches and 3 State Switches
[WMS-6925] - col: fixed an issue with an original caller name being displayed in CDR-View instead of a modified one for trunk calls if Dialplan application "Set -> Caller name" was used
[WMS-7461] - col: fixed an issue with dates being displayed incorrectly in CDR-View if PBX timezone differed from a browser timezone
[WMS-8127] - sys: fixed an issue when provisioning failed in case time zones selected in WMS Settings -> Language & region contained slash symbol
[WMS-8169] - wms: fixed an issue with impossibility to enable HTTP proxy client for remote support
[WMS-8601] - col: fixed an issue with the total count of calls, faxes and voicemails being not displayed in CDR-View
[WMS-8765] - sys: fixed an issue with Fax postpone delivery in Collaboration being nonfunctioning
[WMS-8890] - wms: fixed an issue when a user with ACL "Cannot - Share status via Kite" couldn't modify presence of other users
[WMS-8987] - wms: fixed an issue in which it was impossible to view imported price lists in WMS -> Trunks
[WMS-9040] - col: fixed an issue with “Save” button not being visible in video conference dialog on laptops with 11' displays
[WMS-9115] - col: fixed behavior of "grouping by week" filter in CDR-View
[WMS-9138] - sys: fixed an issue with wrong billing calculation for calls through WMS Network
[WMS-9269] - sys: fixed infinite logging loop when using web terminal
[WMS-9364] - col: minor fixes for one-to-one and group chats
[WMS-9443] - col: fixed an issue with "Remove" and "Add" options being not displayed for contacts located at the bottom of the page in Collaboration -> Phonebooks
[WMS-9447] - sys: fixed an issue in which Presence server exceeded the limit of connections to DB on Cloud PBXs
[WMS-9507] - sys: fixed an issue in which a user who didn't have any associated Diaplan procedure couldn't make a call from Collaboration because Web phone wasn't available in the list of devices
[WMS-9705] - app: fixed an issue on macos in which fax printer couldn't be installed without "pdf services" directory
[WMS-9825] - app: WIService v. 3.0.6 and Fax printer v. 4.1.2 (macOS) fix an issue with fax sending delay
[WMS-9835] - sys: fixed an issue when it it was impossible to play back a call recording if Dialplan procedure used to manage the call contained 2 or more Dialplan applications "Record call"
[WMS-9868] - wms: fixed an issue with STT service not working in case any PBX user name contained combination of an apostrophe (') and a hyphen (-) symbols
Additional packages: wildix sipproxy 5.2.5-5.01.20201008.1 wildixfxs2 5.01.20201009.1
[WMS-9852] - sys: fixed an issue with incorrect behaviour of presense status monitoring feature on WP phones when BLF keys stopped displaying presence statuses of monitored users
[WMS-9921] - sys: fixed an issue with failed FXS/ FXO media gateways upgrade due to the empty firmwares.json file on PBX
[WMS-8043] - sys: enabled by default daily auto upgrade for newly created systems
Important: The change will become valid only for new PBXs created after 15.10.2020.
[WMS-6512] - dev: new firmware for WelcomeConsole v. 68.145.2.28
1. Added support for Jabra, Plantronics (Poly), Sennheiser popular USB headsets:
2. Added support for LED indication of presence and call statuses on Mono / DuoLED Headsets
[WMS-9816] - api: security improvements for Zoho integration
[WMS-8184] - col: fixed an issue with popup notifications being not displayed for BLF key "Call group" with disabled "Audio notification" option
[WMS-9703] - sys: fixed an issue in which "migrate2cloud" script failed to migrate chats and CDR data from SQLite DB
[WMS-9847] - sys: fixed one way audio issue after answering a call in Collaboration with enabled mobility
New firmware for W04FXO r3 v. 27811011
[WMS-9672] - dev: W04FXO r3 performance optimization
[WMS-9442] - dev: new firmware for WorkForce v. 65.145.4.1:
[WMS-9790] - wms: major security fixes
Additional packages: wildix sipproxy 5.2.5-5.01.20200917.1 ejabberd 19.02-5.01.20200916.1
[WMS-9612] - sys: fixed no audio issue for calls between 2 PBXs in WMS Network located in 2 different routable LAN networks
[WMS-9727] - col: improvements for customer feedback option in Collaboration
Additional package: wildix cw package 5.01.20200909.1
[WMS-9641] - col: fixed an issue with "Conference", "Recording" and "Transfer" buttons being unavailable for calls in Collaboration when calling via Diaplan application "Call through remote PBX"
[WMS-9636] - sys: fixed an issue with double authentication when connecting to WebAPI using Chrome browser v. 80 due to disabled support of cross-site cookies
Limitation: the issue still might be present when using Incognito Mode (by default, it blocks third-party cookies). You can change this behaviour (allow all cookies) in chrome://settings/cookies.
New W-AIR firmware version 0501b001 for W-AIR bases and 0501b002 for W-AIR Handsets.
[WMS-9321] - dev: fixed an issue in which "Lone Worker" alarms were still active after setting "No movement profile" alarm during handset charge
[WMS-9603] - sys: fixed one way media issue for a callee after answering a call in Collaboration with enabled mobility
[WMS-9185] - sys: additional fix for the issue in which WP phones connected to HW/ VM PBX couldn't get firmware after upgrading to WMS 5.0 (initial ticket WMS-9154)
[WMS-9325] - wms: added possibility to access storages and ntp server menus before pbx activation
Additional packages: sipproxy package 5.2.5-5.01.20200818.1 wildix-base package 5.01.20200818.1
[WMS-9462] - sys: performance tuning for 1GB PBX instances in order to prevent lack of memory
Additional packages: sipproxy package 5.2.5-5.01.20200817.1 wildix-cw package 5.01.20200818.1
[WMS-9542] - sys: fixed no video issue from Dahua doorphones after upgrading PBX to WMS 4.04
[WMS-9586] - sys: fixed periodic PBX engine crash during playback of sound files
[WMS-9519] - sys: fixed an issue with audio in some cases for calls in wms network after upgrade to 4.04
Issue reproduced in case caller used a device provisioned for using wideband codecs but without support for Opus (e.g a W-AIR user on one PBX calling a WP user on another PBX in WMS network)
New firmware for Wp480gr3 v. 63.145.10.22.rom WorkForce v. 65.145.2.15 Wp490gr3 v. 67.145.8.94 WelcomeConsole v. 68.145.2.26
[WMS-9397] - dev: fixes and improvements for srtp lock icon on wp phones
Fixed position and changed color of srtp lock icon (from red to green)
New firmware for WorkForce v. 65.145.2.14.rom
[WMS-8931] - dev: fixed an issue with no ringback tone on usb headset connected to workforce phone
[WMS-9539] - col: added support for danish language
[WMS-9527] - sys: fixed an issue in which automatic sync of devices wasn't performed after pbx upgrade
issue introduced in WMS v. 5.01.20200612.2
Additional packages: provision package 5.01.20200804.1 dialplan package 5.01.20200804.1 lua-base package 5.01.20200804.1 base package 5.01.20200804.1
[WMS-7345] - sys: fixed an issue with outgoing fax queue being blocked after the first unsuccessful attempt
[WMS-9490] - sys: fixed an issue in which paging stopped working after PBX reboot
[WMS-9441] - wms: fixed several Dialplan issues in which:
New firmware for WP480G r3 v. 63.145.10.21, WP490G r3 v. 67.145.8.93, WorkForce v. 65.145.2.10, WelcomeConsole v. 68.145.2.25
[WMS-9419] - dev: fixed an issue in which incoming concurrent calls were routed only to BLF key "Line 1"
[WMS-9384] - sys: fixed an issue with Collaboration freezing under high load
[WMS-9140] - wms: fixed an issue in which a Call group member who changed user status to “DND” while being paused for wrap up time or auto pause on no answer, still received Call group calls
New firmware for WorkForce v. 65.145.2.7
[WMS-9314] - dev: WorkForce improvements:
[WMS-7932] - wms: fixed an issue in which import of user from active directory failed if email address contained generic top-level domains
[WMS-8694] - sys: fixed an issue in which pbx engine couldn't access cdr database if mssql backend was used with a non-standard port (not 1433)
[WMS-9324] - sys: fixed an issue with PBX engine crash that was caused by corrupted CDR DB tables
[WMS-9068] - col: fixed an issue in which user avatars disappeared after zooming in/ out Colleagues page in Collaboration
[WMS-9285] - wms: fixed an issue with incorrect {rand} parameter being added to "Verify number of calls" and "Trunk Group" Dialplan applications if editing via "Developer" option
[WMS-9183] - wms: fixed an issue when it was impossible to save any changes on FAX/SMS server page if PBX was in WMS network
[WMS-9272] - sys: fixed a rare issue in which calls in progress via trunk crashed if debug level was set >3
[WMS-8990] - col: increased the max number of CDR-View exported records up to 500 000
[WMS-9093] - wms: fixed an issue with impossibility to close device's direct access via "Disconnect" option in WMS -> Devices
[WMS-9169] - sys: fixed no audio issue for calls received via BRI / PRI gateway if a call was answered by a user after IVR or Play sound Dialplan application on Cloud PBX after upgrade to 5.01.20200605.5
[WMS-9179] - wms: fixed an issue with multiple custom destinations/ E-mails being assigned incorrectly after adding them to Fax to e-mail Dialplan application
[WMS-9241] - sys: deprecated the old media core behavior when it was possible to switch Direct RTP logic
Note: You won't be able to switch to the previous behaviour https://confluence.wildix.com/x/3oC5Aw
[WMS-9154] - dev: fixed an issue when WP phones connected to HW/ VM PBX couldn't get firmware after upgrading to WMS 5.0
[WMS-9176] - wms: fixed JSON Web Token validation error during S2S authentication
[WMS-9163] - sys: fixed no media issue on WP phones connected to Cloud PBX if UDP or TCP was set as SIP Transport via custom provisioning parameter
[WMS-9126] - sys: fixed an issue with BLF keys "Line" not working in WMS Network after upgrade to WMS v. 5.01.20200603.2
[WMS-9093] - wms: fixed an issue with impossibility to close device's direct access via "Disconnect" option in WMS -> Devices
[WMS-8849] - col: improved Collaboration top menu design
[WMS-9041] - sys: devices connection is now established via TLS:
[WMS-8511] - sys: fixed no audio issue after attended transfer if a transferee belonged to a different subnet
[WMS-9082] - wms: fixed error processing issues after changing and saving settings in WMS -> Dialplan
[WMS-9108] - sys: fixed no media issue for calls between Collaboration and Android application if callee had mobility feature enabled
[WMS-9114] - wms: fixed an issue when selected Dialplan rules were not applied after import
[WMS-9066] - col: fixed an issue with impossibility to send faxes via Wildix Fax Printer
[WMS-9084] - sys: fixed an issue in which PBX could freeze after reboot
[WMS-9023] - sys: fixed call drop issue for calls received or placed via BRI/ PRI media gateways
[WMS-9081] - sys: fixed an issue with "users" home directory being removed after PBX upgrade and reboot
[WMS-9046] - wms: fixed an issue with incorrect displaying of JSON editor in fullscreen mode on Dialplan rules page
[WMS-9002] - sys: memory leak fixes and general memory optimization for systemd service manager
[WMS-6693] - sys: enabled by default DTLS-SRTP media encryption between PBXs in WMS Network
[WMS-8616] - wms: improvements for Dialplan rules page in WMS -> Dialplan:
[WMS-8691] - sys: SDES-SRTP feature is now enabled by default on supported devices (BPI/ PRI gateways, WP480G r3/ WP490G r3/ WorkForce, WelcomeConsole)
[WMS-8455] - sys: fixed an issue when after call pickup/ call forward, user received a call from another user whose call was previously picked up and two calls were bridged automatically instead of a second incoming call
[WMS-8605] - col: URL previews in Collaboration messages are now displayed in a language set in user's Personal Settings
[WMS-8763] - sys: added support for direct upgrade of BRI/ PRI media gateways via internet connection
Notes:
[WMS-8869] - sys: disabled audio notification for call intrusion by default
To enable audio notification:
[WMS-7349] - col: increased clickable areas for DTMF keypad in Collaboration call dialog window
[WMS-8839] - sys: fixed call drop issue after 25 minutes if it was placed between 2 Collaborations in WMS Network
[WMS-8840] - sys: fixed one way audio issue in case of mobility call if Direct RTP was enabled
[WMS-7535] - sys: improved SIP DoS protection
[WMS-8435] - col: redesign of Collaboration top menu
[WMS-8338] - sys: added possibility to select proper SMB version during Windows share initialization
The option "SMB version" is located in WMS Settings -> System -> Storages -> Add NFS/Windows share.
[WMS-8540] - sys: fixed an issue with SIP Proxy syslog errors for SIP trunk of German VoIP operator Deutsche Telekom SIP Anlagenanschluß
[WMS-8635] - col: added possibility to edit the last sent chat message in Collaboration
How-to:
Notes:
Limitation:
[WMS-8609] - wms: refactoring of HTTP proxy client page in WMS Settings -> System
[WMS-8673] - wms: discontinued support for Zoho API version 2
To switch to the version 3: https://confluence.wildix.com/x/2IPIAQ (Update instructions).
[WMS-8680] - wms: removed deprecated Colleagues API endpoints:
[WMS-8678] - wms: fixed an issue in which it was impossible to manage calls (start/ answer/ hangup) from Zoho CRM because it couldn't be authorized on PBX
[WMS-8679] - sys: fixed an issue with click-to-call from Zoho CRM not working in some cases
[WMS-8573] - sys: enabled TProxy multiple processing for handling multiple connections
Note: for PBXs with > 2GB of memory. CPU load is decreased by splitting multiple processes for each CPU core.
[WMS-8383] - wms: fixed an issue with call and chat history not working after applying backup from Cloud PBX
[WMS-7504] - sys: call waiting parameter can now be activated for Call Groups with CG strategy “Call All 32”
[WMS-8368] - wms: refactoring of W-AIR Networks page in WMS -> Devices
[WMS-8402] - wms: removed possibility to synchronize time manually on NTP Server page in WMS Settings -> System
[WMS-7944] - col: limited size of a group chat title to 1024 symbols
[WMS-8146] - sys: fixed an issue when user received an email notification about joining a group chat as unread message from one-to-one chat
[WMS-8151] - dev: fixed an issue in which fax sending of multipage documents via FXS r3 gateway failed due to additionally added image row
[WMS-8565] - sys: fixed an issue in which configuration sync between Main and Secondary PBXs could not work in some cases
[WMS-8629] - wms: fixed an issue in which Wizyconf couldn't get the configuration from PBX after the first provisioning or being restarted
[WMS-8630] - sys: fixed an issue with Dialplan crashing if it contained previously deleted IVR tree
New firmware for WP480GR3 v. 63.145.10.13, WP490GR3 v. 67.145.8.92, WelcomeConsole v. 68.145.2.24
[WMS-6918] - dev: fixed an issue with delay of handling calls on WP480GR3, WP490GR3, WelcomeConsole in Failover environment if Secondary PBX was down
[WMS-8290] - app: WIService v. 2.12.1 (Windows) improves collecting of crash logs: now logs from crash_dumps folder are sent automatically
[WMS-7199] - sys: added support for direct RTP between Kite and Web phone
Added full ICE support for Kite and WebRTC phone:
The feature is disabled by default. To enable it, add the following line to the file /rw2/etc/kamailio/host_specific_custom.cfg:
modparam("pv", "varset", "ice_drtp=i:1") |
[WMS-7264] - wms: added support for S2S authentication via token for Wildix PBX API
API documentation: https://<pbx_host>/api/v1/doc/#tag/Authentication/bearer
[WMS-7804] - col: added support for preview of video/ audio files via HTML5 <video>/ <audio> tags and youtube player in Collaboration chats
[WMS-8164] - col: added ability to leave customer feedback in Collaboration
The option "Feedback" located in Collaboration top menu (right corner).
[WMS-8204] - wms: implemented PHP HTTP client library for using S2S authentication
Github developer documentation: https://github.com/Wildix/s2s-client-php
[WMS-7772] - sys: added support for up to 1000 nodes in WMS Network
Important: in case there are more than 252 PBXs in WMS Network, they all must be upgraded to WMS v. 5.0. Otherwise, chats, calls, statuses from / to PBXs on WMS 4.03 won't work.
[WMS-7773] - sys: added support for showing up to 0,0001 in cost calculation in pricelist and CDR-View
A new option "Decimal places number in Cost" is available in CDR-View -> Settings and allows changing the number of decimal places to be shown.
[WMS-7957] - wizy: emails of participants are now matched with PBX users if they are present while creating a video conference
[WMS-8061] - sys: default behavior changed for call intrusion: audio notification (beep) enabled by default!
A beep sound is played when any type of call intrusion (including silent intrusion) is started.
To disable it:
[WMS-8192] - col: increased size of devices selection window in Collaboration
[WMS-8217] - col: redesigned Login page in Collaboration
[WMS-8245] - sys: Identities feature is now compatible with ACl rule "Can/cannot - call pickup"
[WMS-8248] -sys: optimized Chat and Presence server load when a new client connection is established
[WMS-8283] - wms: optimized API response time for all endpoints with basic and session authentication
[WMS-8375] - sys: improved system performance for systems with large amount of users (> 3000 users)
[WMS-8377] - sys: S2S connection is now established directly (not via vpn) when possible
[WMS-8416] - sys: improved the logic of call forwarding to trunks
[WMS-8498] - api: disabled access to Basic Authentication API for the admin user
Note: for S2S auth, use PHP HTTP client library (ticket WMS-8204).
[WMS-8345] - col: fixed an issue in which CDR-View didn't work with a large number of excludes
