Skip to end of banner
Go to start of banner

How to Set Up HubSpot Integration

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

This Guide describes how to set up HubSpot Integration with Wildix PBX.

Other documentation: x-bees Admin Guide

Created: November 2023

Permalink: https://wildix.atlassian.net/wiki/x/AYC4Eg

Introduction 

HubSpot integration enables automatic logging of calls and conferences that take place on the Wildix system between users and HubSpot contacts.

Requirements

  • x-bees-Standard license or higher
  • Admin access to HubSpot account

Installation

  1. Go to WMS Settings -> PBX -> Integrations -> x-bees

  2. Wildix Integration Hub opens 

  3. Click on HubSpot Automation:

  4. Click Install to proceed with the activation:



  5. Click Sign in and log in to your HubSpot account (Admin): 


Notes:

  • HubSpot and x-bees sync may take up to 5 minutes
  • x-bees contact can be created only with users that have an email address
  • Contacts deleted from HubSpot are not removed in x-bees

For managing calls directly from HubSpot account, refer to a separate integration: HubSpot Integration User Guide.



​​Logging activities

Inbound and outbound calls via PBX and conferences are automatically logged for all HubSpot contacts that have a match and are displayed in HubSpot as completed tasks. 

  • Logged call data includes: participants, call type and duration, date and time the call was received/made, information about transfers.
    Missed PBX calls (in case of contact match in HubSpot) are logged to the existing HubSpot contact as a completed activity. 
    Successful calls are logged to HubSpot with Connected status. 
  • Logged conference data includes: participants, the title of the conference, duration, date and time the conference took place. Activity is logged for each contact participating in the conference that has a match in HubSpot.

If a contact has multiple matches, activity is logged for the newest contact:

  • This logic applies if the duplicate contact was created after the installation of the integration. Otherwise, if contact had multiple matches before the installation of the integration, the match is chosen randomly.
  • When the contact match is changed, all new activities are created for the assigned match. Old activities are not changed

The following activities are not logged automatically:

  • Received and missed PBX calls in case of an unknown number
  • Calls made and canceled within 5 seconds
  • Calls between users of the same PBX/ WMS Network




  • No labels