This Guide describes the steps of Microsoft Phone System Setup.
Detailed documentation on how to add your customers can be founded on teams4Wildix portal -> Services -> Teams -> Documents.
Created: July 2021
Permalink:
Prerequisites
A partner needs to provide the following via Customer care ticket for the service activation:
- Amount of users that will use Mode 2 of the integration (these users MUST have E3 + phone system license or E5 on Microsoft side)
- Email of a customer's admin (who has admin rights in Microsoft domain). Multiple emails can be sent and set up
Create customers
Note: the steps described below are carried out by a partner.
Configure you customers. For that, activate an account on https://admin.teams4wildix.com/. You see the list of active subscription according to the amount of users you provided before
To create a customer:
- Go to Accounts tab and click + Add account
- Enter customer's Name and Primary Country
- Click Add
Set up Microsoft Phone System
Note: the steps described below are carried out by a customer's admin.
To be able to make calls using Teams Dialpad, you need to set up the connection between your PBX and Office 365 tenant. For that, activate an account on https://admin.teams4wildix.com/.
Step 1. Activate an account on teams4wildix portal
Once you receive an invitation via email, click Accept Invitation to access the portal https://admin.teams4wildix.com/:
- Go to Getting Started -> Prerequisites tab and click Check My Tenant:
- Select Microsoft account with admin rights and the required licenses
- If the account meets all the requirements, Tenant check is successful and you can click Next to go to the next step:
Step 2. Create PBX
You are under PBX tab. To add your PBX, proceed with these steps:
- 1 - Select Teams4Wildix from the available templates
- 2 - Select your country from the list
- 3 - Enter your PBX domain name
- 4 - Check off Manage Teams Calling Policy
- 5 - Select Prohibit Voicemail & Call Forwarding under Teams Voicemails
- 6 - Select PBX Hold Music under Music On Hold
Click Add PBX
Step 3. Sync the portal with your MS account
You are under Teams tab. To sync teams4Wildix portal with your Microsoft account, follow these steps:
- Click Enable Service
- Select the same MS account used in Step 1
- Once the sync is active, click Next to go to Step 4
Sync may take up to 15 minutes
Step 4. Add users
Important notes:
- Use user extension (NOT usernames) as SIP Username and Auth Username
- Use SIP password (NOT web password) as Password. To get SIP passwords, export user's data in WMS -> Users -> Export CSV. In the downloaded file, actual passwords can be found in column SipPassword
You are under Users tab now. To add users, follow these steps:
- Click Add User
- 1 - Select a User from
- 2 - SIP Username and
- 3 - Auth Username -
- 4 - Password - enter user SIP password
- Click Add to create a user
Microsoft Phone System Usage
Note: This Mode allows also using Collaboration Plugin Mode.
To place calls using Teams Dialpad, go to Calls tab and click Dial a number. To control an active call (put it on pause/ resume, transfer, etc), click More actions (three dots).