...
Info |
---|
This guide leads you through installation of W-AIR Base Sync Plus and setting up a W-AIR DECT Network in which the bases sync over LAN. W-AIR Base Sync Plus and Sync Plus Outdoor support starts from WMS 4.01.44072.21. Useful links:
Updated: February 2022 Permalink: https://wildix.atlassian.net/wiki/x/PgjOAQ |
Table of Contents |
---|
Watch the video tutorial about setting up a W-AIR Multicell Network (registration is required):
...
1. Base station - an essential component of a DECT system. Wildix W-AIR base stations:
- Multicell base stations: W-AIR Base (End Of Life), W-AIR Base Outdoor, W-AIR Base Sync Plus, W-AIR Base Sync Plus Outdoor
- Single Cell base station: W-AIR Base Small Business. Documentation: W-AIR Small Business - Admin Guide, W-AIR Small Business R1 OLD - Admin Guide/wiki/spaces/DOC/pages/30279971
2. Repeater - extends the signal coverage of the base station.
...
Wildix W-AIR handsets: W-AIR Basic, W-AIR 100 (End Of Life)Basic2, W-AIR LifeSaver, W-AIR Med, W-AIR Office and W-AIR Headset. Follow the online Guides to get detailed information: W-AIR DECT Handsets Guide, W-AIR Headset Guide.
...
- LAN PTP Sync or Sync over the air (for sync over the air, refer to W-AIR Network Admin Guide - Sync over the air)
- Up to 16000 users per system
- Up to 30* users registered to 1 base station
- Up to 4000 bases per system
- Up to 8 concurrent calls** per base
- Up to 8 concurrent handovers per base
- Up to 3 repeaters per base
- Up to 50 bases - 3 repeaters
- 50-125 bases - 1 repeater
- More than 125 bases - no repeater
- Up to 5 concurrent calls per repeater
- Up to 100 repeaters per system
- Base station indoor range: 50 m; outdoor range: 300m
Note |
---|
*Note: by default W-AIR system supports up to 20 devices, to increase the number to 30 devices, use Custom Provisioning parameter, described in this document: https://confluence.wildix.com/x/KQg8AQ |
Warning |
---|
** Enabling PTT feature (Push-to-talk) on W-AIR handsets reduces the number of available channels on each base station to 6. |
...
You can assign W-AIR handset to a user via the handset itself or via WMS (starting from WMS 5.04.20220309.1).
Assigning via the handset
...
Note |
---|
Note: The support starts from WMS 5.04.20220309.1. |
Go to WMS -> Devices -> W-AIR devices
Choose the handset and click Assign to user
Enter user extension and click Save
...
- Fix parts connected to Aruba HP switch will have expected jitter < 300ns
- Fix parts connected via 3 layer switch will have expected jitter < 500ns
- Fix parts connected via 7 layers switch will have expected jitter < 2000ns
Diagnostics Logging
Note |
---|
The option is available starting from firmware v. 0450b13. |
...
Note |
---|
W-AIR Upgrade logic in WMS 5.03. Starting from WMS version 5.03.20210709.3, W-AIR System is upgraded according to the following policies:
|
...