...
- Use five or super five network cable to connect your W-PA to the network
- Connect the cable to WAN (PoE) port
| Note |
|---|
Note: When connecting the W-PA to the local LAN, W-PA should pick up a local IP address (W-PA is set by Default to DHCP). If the device is returning an IP address of 192.168.1.128 after connected to the local LAN (you can check the assigned IP address by pressing and holding the + Volume button for 2 sec), the W-PA seems to be stuck on a Static IP address. If this happened, assign IP address of 192.168.101.130 on the local PC and browse to 192.168.1.128. If presented with Login screen, use the First time login credentials (admin/ admin) to login to the W-PA and change the Network Settings from Static (192.168.1.128) to DHCP, save the changes and reboot the device. After the reboot, the W-PA should return a local IP address, when checked. If when trying to browse to the W-PA, the WEB connection is refused (you never get to Login Screen), then create an RMA. |
...
First, you need to set up a Dialplan to enable the device to answer calls automatically. For this purpose, use Intercom/ Paging group Dialplan applications. The detailed information about Dialplans can be found here: Dialplan applications Admin Guide
Note Note: W-PA SIP Public Announcer supports Paging over RTP multicast. Consult Paging Admin Guide for detailed information.
Example of Dialplan configuration:
where 112 - the extension number of W-PA user
After you set up a Dialplan, you can call the extension number you've assigned the device to from any Wildix IP phone/ Collaboration/ Mobile app
W-PA will auto answer and play back your voice over connected speakers/ a microphone
Note Note: You can also configure W-PA to automatically play back pre-recorded messages at the fixed time. Refer to Online Documentation for details.
If you want to finish broadcasting, press a Hang up button on the device you use for placing a call to hang up
...
- Go to WMS -> Users
- Select the W-PA user and click Edit preferences
- Go to Settings -> Function keys and click Edit
Click +Click Edit to add "Colleague" or "Speed Dial" Function key and enter extension numbers
Warning Important: W-PA uses only first 2 Function keys. In case you have other Function keys set up in the first 2 lines, please change their order:
- Click Save
| Note |
|---|
Note: you can also set up Function keys in Collaboration -> Settings -> Function Fn keys. |
After you set up Function keys, you can move on to the next section.
...