Skip to end of banner
Go to start of banner

Wildix Phones 5 Changelog

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

Wildix Phones 5 Changelog: new features and improvements for new WP 5 phones. 

Other changelogs: https://www.wildix.com/new-releases-and-updates/

Documentation: Wildix VoIP Phones 5 User Guide

Link for sharing: https://wildix.atlassian.net/wiki/x/AgD0GQ

Note: Starting from WMS 6.05 the firmwares are no longer hosted on the PBX. The upgrade is performed as follows: after reboot or check/sync of a device, it refers to the relevant json file on the PBX and in case the new version of firmware is found, the PBX downloads it to local cache, after which the device starts upgrading automatically.

Important: In case of Hardware or Virtual PBX, make sure to grant access for the PBX to the hosts wps.wildix.com and firmwares-cdn.wildix.com via port 443. 

WP 5 Phones Date: 27.02.2024

Fix

[WMS-19397] - dev: fixed an issue in which semi-attended and attended transfer could not be completed by putting the handset on the hook on WP 5 phones

WP 5 Phones Date: 23.02.2024

Fix

[WPR5-13] - dev: fixed an issue in which call was dropped after being picked up on MonoLED headset plugged into WorkForce 5, ForcePro 5 and WelcomeConsole 5


  • No labels