W01GSM Quick Installation Guide helps you install and configure the GSM gateway. Thanks to GSM gateway it is possible to send SMS using your Wildix PBX and to call mobile numbers using the GSM SIM card. Updated: March 2017 min. WMS version required: 2.8.20131 Permalink: https://wildix.atlassian.net/wiki/x/uhzOAQ |
If you are using a WMS integrated DHCP Server, go to WMS Settings -> System -> DHCP Server and search for the device on the DHCP leases.
Note: the media gateway does not support VLAN. |
LED indicator | State | Description |
RUN | ON | device is booting |
Slow blinking | device is not registered | |
Fast blinking | device is registered | |
GSM | ON | device is booting / call in progress |
OFF | SIM card is not registered / incorrect PIN / no coverage | |
Slow blinking | SIM card is registered |
Interface | Description |
WAN | WAN indicator blinks if device is connected even if it’s not registered |
RST | Press and hold for over 6 seconds using a paper clip to restore to the factory defaults |
SIM slot | Press the yellow button to open the card slot and insert the SIM card |
ANT | 3dB external antenna |
Make sure the PIN code of the SIM card is disabled.
Follow our online guide to provision the GSM gateway: Provisioning of Wildix devices - Admin Guide
For remote/unreachable media gateways behind NAT/Firewall, follow our online guide to remote provisioning: Remote Provisioning of Wildix devices - Admin Guide
Go to WMS -> Trunks to edit the GSM gateway parameters: Trunk Settings Guide, GSM Trunk Settings
W01GSM appears on the Trunks page with the current status of Signal Quality, which is normally updated every 30/60 seconds.