Html |
---|
<div id="fb-root"></div> <script>(function(d, s, id) { var js, fjs = d.getElementsByTagName(s)[0]; if (d.getElementById(id)) return; js = d.createElement(s); js.id = id; js.src = 'https://connect.facebook.net/en_US/sdk.js#xfbml=1&version=v2.11'; fjs.parentNode.insertBefore(js, fjs); }(document, 'script', 'facebook-jssdk'));</script> |
...
Info |
---|
This Quick Start Guide explains how to provision Wizyconf via WMP and access, participate in conferences. For the installation and connection, consult Wizyconf Installation Documentation. Created: September 2019 Minimum WMS version: 4.01.44034.20 Permalink: https://confluence.wildix.com/x/GQAxAw |
Table of Contents
Prerequisites
...
Warning |
---|
Important: 1 Wizyconf user can only be used with 1 Wizyconf. You cannot assign it to another Wizyconf. |
The first upgrade
Prerequisites:
...
...
Upon the first launch, Wizyconf automatically upgrades its firmware. The notification about the upgrade is displayed. It takes up to 10 minutes to complete the upgrading process (depends on the Internet connection). Then Wizyconf is rebooted automatically.
Note |
---|
Notes:
|
Remote control overview
Optionally you can use a keyboard and a mouse to control the conference.
...
- Power on/ off: turn off/ turn off Wizyconf-Core
- Video off/ on: turn off/ turn on personal video
- Volume up/ down: adjust the volume level
- Volume off/ on: turn off/ turn on the volume
- Navigation keys Up/ Down/ Right/ Left: navigate between different menu options; rotate PTZ cam (Up/ Down/ Right/ Left) (first press the key Control PTZ cam)
- Back key: go back to the previous page
- Settings key: access the conference settings
- Switch active camera: switch between PTZ and 4K cams
- LED Indicator: blinks red when you press any key; no blink means there is no connection (check that the USB dongle is installed correctly or move closer to the Wizyconf-Core) or the battery of the remote control is down
- Control PTZ cam: press the key to be able to use Navigation keys to rotate the PTZ cam
- Camera zoom in/ out: adjust the zoom of the PTZ cam
- Mute on/ off: mute/ unmute your microphone
- Central Navigation key: confirm different operations
- Record key: start/ stop conference recording
- Home key: press to leave the conference
- Micro-USB interface: connect the charging adapter to charge the remote control unit
The first upgrade
Prerequisites:
- DHCP Server
- Stable internet connection
- Wizyconf must be able to reach the PBX via its public IP (even in case the PBX is local)
- It's necessary to set up a static IP on the Wizyconf:
- Press Home button; Press Google chrome icon → tap on three dots in the upper right part of the screen → tap Settings
- Tap arrow down icon near Network
- Disable the switch "Configure IP address automatically" and then specify the IP address, the Routing prefix (the subnet mask) and the Gateway (the IP address of your router)
Upon the first launch, Wizyconf automatically upgrades its firmware. The notification about the upgrade is displayed. It takes up to 10 minutes to complete the upgrading process (depends on the Internet connection). Then Wizyconf is rebooted automatically.
Note |
---|
Notes:
|
Access the conference
Warning |
---|
By design, conferences cannot be created from Wizyconf. It is only possible to participate. Add the Wizyconf user to an existing conference room before proceeding. |
...