...
Color | LED indication | Status |
Green | Short blink followed by long blink | Power Up |
Fast short blink, repeated | Incoming call | |
Single short blink. Notification of call only via audio in HS | 2nd incoming call, call active | |
Single short blink | In call | |
Long blink | Battery charging | |
Steady on | Battery charging, full | |
Red | Long blink followed by short blink | Power Down |
Fast, short blink | Low battery | |
Steady on | Battery charging, low battery | |
Long blink | Registration failed | |
Single short blink repeated slow | Idle, out of range | |
Blue | Short blink repeated fast | Registration, ongoing |
Long blink | Registration completed | |
Single short blink repeated slow | Idle, connected | |
Purple | Steady on | Menu |
None | Deregistered |
Usage
...
Joining the broadcast
The headset automatically joins the broadcast once left up from the charging cradle.
If the headset goes out of range or has been removed from the broadcast, it automatically rejoins the broadcast within 5 seconds of becoming available again.
...
Speaking in the broadcast
There are two options to mute/ unmute to speak in the broadcast:
- Call button: press and hold the button to get unmuted. You stay unmuted only while pressing the button. When the button is released, the headset goes back to mute.
- Mute button (Hands-free mode): press the button to unmute and be able to speak in the broadcast. All people in the broadcast can hear you. You stay unmuted till the Mute button is pressed again or till the headset is placed on the charger.
Volume Control
...
Press Volume+/ Volume- buttons to increase/ decrease the volume of the broadcast.
...
Managing incoming calls
When you receive an incoming call, the LED indicator starts blinking with fast short green flashes and you hear a ringer.
...
| Warning |
|---|
Important: In the Retail mode, the headset doesn’t differentiate between the broadcast and an incoming call, which means the headset stays muted after accepting the call, until manually unmuted. Check the How to mute/ unmute section of this guide. |
Put a call on hold/ Retrieve a call
- Double-press the Call button to put a call on hold/ retrieve a call.
Swap between calls
- Double-press the Call button to swap between two active calls or between a call and the broadcast.
...
- Press Volume+/ Volume- button to increase/ decrease a call volume.
Put a call on hold/ Retrieve a call
- Double-press the Call button to put a call on hold/ retrieve a call.
End a call
- To end a call and return to the broadcast, single press the Call button.
...