| Scroll export button | ||||||||
|---|---|---|---|---|---|---|---|---|
|
| Info |
|---|
The steps below help you to connect and configure the FXO gateway. Thanks to W04FXO gateway, you can connect analog lines to your IP PBX, but not only; you can enhance your legacy PBX with Unified Communications capabilities. Useful links: Updated: June 2015 Supported starting from WMS version 2.0.16043.9 Permalink: https://confluencewildix.wildixatlassian.comnet/wiki/x/Vwg8AQ_BzOAQ |
Read the white paper: https://drive.google.com/open?id=10kpqi9yJM6gZ7E_YhkmHX6g0pSOTL0KB
...
Connect the gateway using the power supply and the cable provided with the gateway, as it is shown on the picture:
Connection to Ethernet
The gateway has one LAN port configured in Bridge mode and one WAN port set up as a DHCP Client. Connect one of two ports to the same network as the PBX or an external DHCP server (for instance, its router) as shown on the picture:
As soon as the DHCP server assigns an IP address to the gateway, you can pass to the next step of the gateway configuration.
...
W04FXO gateways have 4 ports on the rear part of the devices, marked as Line1, Line2, Line3, Line4. Connect the needed ports to the analog lines.
Provisioning of the gateway
...
- use the paper clip or the object of the similar shape to press the button
- keep the button pressed for 5 seconds
- when the LED Status turns on, the reset of the gateway is complete
| Macrosuite divider macro | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
| Button macro | ||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|