Versions Compared

Old Version 32

changes.mady.by.user Tatiana Bieliakova

Saved on

compared with

New Version Current

changes.mady.by.user Tatiana Bieliakova

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Info

The Guide describes the remote provisioning of each Wildix device.

General information about provisioning: Provisioning of Wildix devices Guide.

Updated: January 2021March 2024

Permalink: https://wildix.atlassian.net/wiki/x/cBnOAQ

...

Note

Note: It is possible to assign unprovisioned devices to users.

Available only for devices added via Remote Provisioning (Semi-automatic mode) or WMP. Refer to this chapter of WMS Start Guide for detailed information about assigning to users.

Step 1: Generate a provisioning link on WMS

  • Go to the WMS -> Devices
  • Click +Add  
  • Select Semi-Automatic mode and click Next:

...

  • After you click Finish, the new device appears on the list:

Step 2: Insert the provisioning link on the device’s web interface

Start 5, WorkForce 5, ForcePro 5, WelcomeConsole 5

  • Go to device’s web interface
    Credentials for the first time access: admin : admin
  • Go to menu System -> Auto Provision tab
  • Proceed to the section Static Provisioning Server and insert the PBX domain into the field Server Address

    Image Added
  • Make sure HTTPS is chosen as Protocol Type:

    Image Added
  • Proceed to the section Autoprovision Now and click the Autoprovision Now button

    Image Added
  • Confirm the provisioning by pressing OK on the screen that pops up:
    Image Added

WP4X0 2015 - 2016 - 2017,

...

Start, WorkForce, WelcomeConsole

  • Go to device’s web interface
    Credentials for the first time access: admin : admin

...

Device is now rebooting (the phone screen indicates that the device is rebooting). After the reboot, you can see the date and time, soft keys and “login0X” on the screen of the device.

WP4X0 old generation and WP500

  • Go to device’s web interface
    Credentials for the first time access: admin : admin

...

Device is now rebooting (the phone screen indicates that the device is rebooting). After the reboot, you can see the date and time, soft keys and “login0X” on the screen of the device.

WP600 old generation

Note

Note: This is WP600 old generation (pre 2015); new generation WP600AXX do not support provisioning via WMS, for configuration of WP600AXX (both remote and local), follow the steps described here: WP600A / WP600ACG – User Guide.


  • Go to device’s web interface
    Credentials for the first time access: admin : admin

...

Device is now rebooting (the phone screen indicates that the device is rebooting). After the reboot, you can see the date and time, soft keys and “login0X” on the screen of the device.

W01GSM

  • Go to device’s web interface
    Credentials for the first time access: admin : admin

...

  • Click on Save
  • Press Back on the prompt page
  • Click on Provision

Device is now rebooting.

DaySaver

  • Go to device's web interface
    Credentials for the first time access: admin : admin

  • Go to the menu System -> Provision
  • Check off Enable
  • Insert the provisioning URL into the field "URL"

  • Click Save


  • Confirm by clicking Apply 



  • Configuration is now applied 

W02FXS 2018, W04FXS 2020, W04FXO 2020/2023, W24FXS 2015

  • Go to device’s web interface
    Credentials for the first time access: admin : admin
  • Go to the menu Management -> Provision
  • Fill in the following fields:

    • URL: insert the provisioning URL 

    • Check Interval: 604800
  • Click Save



W01FXS 2014 / W02FXS 2015

  • Go to device’s web interface
    Credentials for the first time access: admin : admin

...

  • Click on save and reboot:


Device is now rebooting.

W04FXS 2017 and W04FXO 2015

  • Go to device’s web interface
    Credentials for the first time access: admin : admin OR admin : wildix (depending on the fw version)

...

  • Select Reboot and press Apply



Device is now rebooting.

PRI, BRI, W04FXS (old generation), W08FXS, W16FXS and W24FXS (old generation)

  • Go to device’s web interface
    User name for the first time access: public, no password needed
  • Go to the menu Management -> Configuration Scripts
  • Fill in the following fields inside the section “Execute Scripts”:
    • Specific File Name: insert the part of the provisioning URL without the PBX IP address: ?action=setaps
    • Transfer Protocol: select “HTTP”
    • Host Name: enter the PBX IP address or domain name
  • Click on Apply & Execute Now 


Device is now rebooting.

W01FXS old generation

  • Go to device’s web interface
    Credentials for the first time access: administrator : 84117341

...

  • Go to the menu Save change
  • Click on Save



Device is now rebooting.

W-AIR Sync Plus

  • Go to device’s web interface
    Credentials for the first time access: admin : admin

    Note

    Note: Starting from firmware v. 0730b0100, the credentials are: admin : Wildixwair


  • Go to the menu Management
  • Modify the following fields:
    • Management Transfer Protocol: select “HTTP”
    • Configuration File Download: select “Base and Multi Cell Specific File”
    • Configuration Server Address: enter the PBX IP address or domain name
    • Base Specific File: insert the part of the provisioning URL without the IP address of the PBX: ?action=setaps
    • Multi Cell Specific File: the same value as in Base Specific File
  • Click  Save and Reboot

...

  • Go to WMS -> Devices -> W-AIR Networks and click Add to create the network with the added base station
  • Select W-AIR Sync Plus in Devices tab and click Configure / Sync device
  • Reboot the base station one more time to apply changes

W-AIR old generation

  • Go to device’s web interface
    Credentials for the first time access: admin : admin

    Note

    Note: Starting from firmware v. 0730b0100, the credentials are: admin : Wildixwair


  • Go to the menu Management
  • Modify the following fields:
    • Management Transfer Protocol: select “HTTP”
    • Configuration File Download: select “Base and Multi Cell Specific File”
    • Configuration Server Address: enter the PBX IP address or domain name
    • Base Specific File: insert the part of the provisioning URL without the IP address of the PBX: ?action=setaps
    • Multi Cell Specific File: the same value as in Base Specific File
  • Click  Save and Reboot

...

  • Go to WMS -> Devices -> W-AIR Networks and click Add to create the network with the added base station
  • Select W-AIR in Devices tab and click Configure / Sync device
  • Reboot the base station one more time to apply changes

W-AIR Small Business PRE 2021 and 2021

  • Go to device’s web interface
    Credentials for the first time access: admin : admin

    Note

    Note: Starting from firmware v. 0730b0100, the credentials are: admin : Wildixwair


  • Go to the menu Management
  • Modify the following fields:
    • Management Transfer Protocol: select “HTTP”
    • Configuration File Download: select “Base Specific File”
    • Configuration Server Address: enter the PBX IP address or domain name
    • Base Specific File: insert the part of the provisioning URL without the IP address of the PBX: ?action=setaps
  • Click on Save and Reboot



Device is now rebooting.

W-PA

  • Go to device's web interface:
    • Press Volume - key for 3 seconds to obtain its IP address

    • IP address will be playbacked through the speaker 

      Warning

      Important: to be able to get W-PA IP address, you have to connect external speakers via Speaker interfaces/ a microphone via Microphone interface.


...

The device is now rebooting. You will hear two audio signals: the first one is played at the beginning of the reboot, the second one is played after it is completed.

Note: After provisioning

As soon as the device has rebooted, go to the WMS -> Devices.

...