...
Info |
---|
This guide leads you through installation of W-AIR Base Sync Plus and setting up a W-AIR DECT Network in which the bases sync over LAN. W-AIR Base Sync Plus and Sync Plus Outdoor support starts from WMS 4WMS 5.01.44072.21. Useful links:
Updated: February 2022January 2023 Permalink: https://wildix.atlassian.net/wiki/x/PgjOAQ |
Table of Contents |
---|
Watch the video tutorial about setting up a W-AIR Multicell Network (registration is required):
...
You can assign W-AIR handset to a user via the handset itself or via WMS (starting from WMS 5.04.20220309.1).
Assigning via the handset
...
Note |
---|
Note: The support starts from WMS 5.04.20220309.1. |
Go to WMS -> Devices -> W-AIR devices
Choose the handset and click Assign to user
Enter user extension and click Save
...
After you have enabled the option "Sync Plus via Ethernet" (described in the previous chapter, Step 2), you can view the multicell network configuration on the base station's web interface, menu LAN Sync:
...
- Fix parts connected to Aruba HP switch will have expected jitter < 300ns
- Fix parts connected via 3 layer switch will have expected jitter < 500ns
- Fix parts connected via 7 layers switch will have expected jitter < 2000ns
Diagnostics Logging
Note |
---|
The option is available starting from firmware v. 0450b13. |
...
Radio Coverage
When checking the Radio Coverage on the web interface of the Base station -> menu Multi Cell, pay attention that the coverage values of every connected base in DECT sync source column are infinite by design.
...
Note |
---|
W-AIR Upgrade logic in WMS 5.03. Starting from WMS version 5.03.20210709.3, W-AIR System is upgraded according to the following policies:
|
...