Page Comparison

<div id="fb-root"></div>
<script>(function(d, s, id) {
  var js, fjs = d.getElementsByTagName(s)[0];
  if (d.getElementById(id)) return;
  js = d.createElement(s); js.id = id;
  js.src = 'https://connect.facebook.net/en_US/sdk.js#xfbml=1&version=v2.11';
  fjs.parentNode.insertBefore(js, fjs);
}(document, 'script', 'facebook-jssdk'));</script>

...

PBX

WMS Network

...

Step 2. Select the backend for CDR storage (Hardware, Virtual PBX)

...

• Remote queues logging: enables MySQL remote Queues logging service
• Hostname: IP or host name of MySQL database
• User: the user to access to the server
• Password: the password to access to the server
• Database name: the name of the database

Security

Configure domain whitelist to protect PBX from cross-site request forgery (CSRF) attacks.

Refer to Domain Whitelist (Allow Origin) Configuration Instruction for detailed information.

Active Directory Single SignOn via Kerberos (Negotiate) (WMS 4.0X)

You can set automatic Single Sign-On via Active Directory.

...

WMS Network interface

• DMZ wtun0 (static) interface is used for connection to WMS Network. The interface cannot be edited unlike enth0 and enth1 interfaces

Options:

• Click + Virtual to add a virtual interface to be able to assign more than one IP to a physical interface
• Click + Vlan to add an interface with VLAN settings
• Click Enable routing eth0 to enable devices connected to other interfaces to use the data connectivity of the PBX (WAN port)
• Click Enable traffic shaper eth0-eth2 to create a bridge between the two interfaces and give a higher priority to the data traffic coming from eth0; more information in Choosing a network scenario (Hardware PBX)
• Click - to delete the selected virtual interface
• Click Edit to edit the settings of a selected interface (IP, subnet, status)

...

• Enable DHCP server at boot time: enables internal DHCP server and allows you to select the interface on which the server is enabled (normally eth1)
• Start/ End address: range of IP addresses that can be assigned to hosts
• Default lease time (mins): minimum time period for lease duration
• Maximum leases: maximum number of leases that can be assigned
• Domain name suffix: if the hosts are inserted in the network which is managed by the domain controller
• Default gateway: IP address of the router or of the PBX (in case of LAN interface)
• Primary / Secondary DNS server: addresses of DNS servers
• Primary /Secondary NTP Server: addresses of NTP servers
• Primary / Secondary WINS Server: addresses of WINS servers
• Deny unknown clients: if enabled, IP addresses are not automatically assigned to unknown hosts

...

• NTP servers
• Primary / Secondary WINS Server: addresses of WINS servers
• Deny unknown clients: if enabled, IP addresses are not automatically assigned to unknown hosts

After you make some changes, click Save changes button.

Leases table

All the IP addresses which DHCP server has assigned to devices, appear in this table.

...

Enable the PBX to send notifications of the new voicemails, missed calls, chat requests, call recordings, faxes, etc.

Wildix Cloud PBXs offer default server for sending email notifications. Just enable Default settings option and click Save to be able to use the default server.

To activate SMTP client on Hardware and Virtual PBXs, enter the following parameters:

...

• The logs are displayed in the field below and you receive the following email:

FAX/SMS server

Allows you to enable Mail2Fax and Mail2SMS services and specify the general parameters for FAX/SMS management.

...

• Wait till the system checks whether there is a new version available in the selected repository
• In case there is a new version available, click Perform upgrade button:
  
  

• As a rule, the Upgrade procedure takes several minutes (however it depends on your Internet connection and the number and volume of packages that must be downloaded). During the procedure, you can review the upgrade log:

• As soon as the upgrade is completed, click Reboot button. You can review can download the upgrade log by clicking Show log button or download it by clicking Download full log button:

• After the reboot is completed, you will be forwarded to the login window
• Log in to proceed with the system
  
  

Automatic upgrade

You can set up enable automatic upgrade to be performed at the specified time.

Parameters:

• Upgrade repository: enter the name of the repository
• Email: enter the email address to which the upgrade result (only in case the upgrade was performed) will  will be sent 
• Perform: enable the system to check each day / week / month if there is a new version available, and if yes, perform the upgrade automatically. Auto-upgrade is performed during the night

Custom firmware server (WMS 4.0X)

Deploy a local upgrade server for Vision/ SuperVision and indicate the server URL to update firmware in in cases when phones cannot phones cannot get it from firmwares.wildix.com server (for example, connection to the server is blocked from the phone; PBX doesn't have access to the server). Please  Please contact Wildix Support for details.

Activation / Licences

Activate PBX and Wildix licenses.

Read the guide PBX Licensing and Activation for the information about PBX activation and activation of other licenses. 

...