Monitor Wildix PBX using Zabbix - Admin Guide - English

Step 1. Setup of zabbix-agent

1. Access PBX via SSH as root:

• Go to WMS and select Terminal from the top secondary menu 

  Note: Terminal is available only for admin users.

• Access PBX via SSH as a root 
  
  

su
wildix (Password line)
!1

2. Create a file:

• Use the command: 
  
  

nano-tiny /etc/zabbix/zabbix_agentd.d/my.conf

• Enter two lines:

StartAgents=3
Server=192.168.0.1

where 192.168.0.1 is the IP address of your server

3. Restart zabbix-agent:

Use the command:

/etc/init.d/zabbix-agent restart

Step 2. Setup of zabbix-server

1. Download the template file from https://wildix.com/image_pbx/zabbix-templates/wildix.xml
2. Access Zabbix -> Configuration -> Templates, 

3. Click Choose File to upload the template file that you have saved on your PC, then click Import
   

4. Go to Configuration -> Hosts
5. Click Create host and fill in:
   
   • Host name
   • Groups: select group(s) from “Other groups” section and move the selected group(s) to “In groups” section
   • Agent interfaces: enter IP address or DNS name of your Wildix PBX (depending on what you selected, choose Connect to IP or DNS

6. Click Add

7. Go to Hosts -> Templates, 
8. Click Select and select “Wildix Templates” from the list

9. Tick off “Template Wildix-PBX” and click Select

10. Go to Configuration -> Hosts and find your Host on the list by its Host name

Status: “Enabled” (green)

ZBX: green (it might take some time for ZBX icon to turn green)

Ports used by Zabbix

• 8099 TCP for pbxstat.wildix.com
• 10050 TCP for local Zabbix

To check it, use the command: 

/etc/zabbix/zabbix_agentd.conf 

Monitoring tools

Go to Monitoring -> Graphs

Select your Host in the upper right section

Select the Graph from the list of available graphs:

• Callweaver Restart
• Collaboration Users
• CPU jumps
• CPU load
• CPU utilization
• Disc space usage*
• Memory usage
• Network traffic*
• PBX temperature cpu
• PBX temperature mb
• PBX users
• Phone calls
• SIP Proxy Restarts

*these sensors become available after some time (it is necessary to update the web page)