The line of Wildix network switches WSGxxPOE is going EOL after the current stock is over. You can check the availability of items remaining in stock on WMP |
A quick guide to connection, installation and troubleshooting of WSG05POE-WSG08POE-WSG16POE-WSG24POE. Switches Documentation pre 2019: https://drive.google.com/drive/folders/1s93QnJJ_mncZb1iP4QjQ_Q8dW9zWpnti. Updated: November 2020 Permalink: https://wildix.atlassian.net/wiki/x/4w7OAQ |
| LED | Status | Description |
PWR | ON | Power is supplied |
OFF | No power | |
Link/Act | ON | A valid link is established |
Blinking | Data packets received or transmitted | |
OFF | No link is established | |
PSE | ON | There is a PoE PD (Powered Device) connected to the port, which supply power successfully |
OFF | No PD port connect to the port | |
Blinking | The power is not enough to supply PoE device to work on. | |
MAX | ON | When the power output to PDs has reached or exceeded the maximum power budget. No additional PDs connected will be powered |
OFF | When the system is using less than 55W | |
Blinking | The power is not enough to supply PoE device to work on |
LED | Color | Status | Description |
PWR | Green | ON | Power is supplied |
OFF | No power | ||
Link | Orange (10/100Mbps) Green (1000Mbps) | ON | A valid link is established |
Blinking | Data packets are received or transmitted | ||
OFF | No link is established | ||
PoE | Orange | ON | A PoE PD (Powered Device) is connected to the port |
OFF | No PD is connected to the port | ||
MAX 1 (1-4 Ports) | Yellow | ON | The power output has reached the max power budget (⋝55W) |
Blinking | The power output has exceeded the max power budget (⋝70W) | ||
OFF | The power of all the connected PoE ports is less than 55W | ||
MAX 2 (5-8 Ports) | Yellow | ON | The power output has reached the max power budget (⋝55W) |
Blinking | The power output to PDs has exceeded the max power budget (⋝70W) | ||
OFF | The system is using less than 55W |
LED | Color | Status | Description |
Power | Red | ON | Power is supplied |
OFF | No power | ||
Link / Act / Speed | Orange (10/100Mbps) Green (1000Mbps) | ON | A valid link is established |
Blinking | Data packets are received or transmitted | ||
OFF | No link is established | ||
PoE | Yellow | ON | A PoE PD (Powered Device) is connected to the port |
OFF | No PD is connected to the port |
See WSG24POE – Administrator Manual for more info on configuration of the web managed switch.
LED | Color | Status | Description |
PWR | Green | ON | Power is supplied |
OFF | No power | ||
Link / Act / Speed (1-24) | Orange (10/100Mbps) | ON | A valid link is established |
OFF | No link is established | ||
Green (1000Mbps) | Blinking | Data packets are received or transmitted | |
Link / Act / Speed (SFP1,2) | Green | ON | A valid link is established |
OFF | No link is established | ||
Blinking | Data packets are received or transmitted | ||
PoE (1-24) | Yellow | ON | A PoE PD (Powered Device) is connected to the port |
OFF | No PD is connected to the port | ||
Blinking | The PoE power circuit may be in short or the power current may be overloaded |
Connect devices to the ports of the switch using a network cable (check the Datasheet for more information).
Please plug the power supply into the switch. When the switch is power on, the power indicator will be light on on the front panel of the switch shines.
Network Connection
Connect your devices (computer, router, switch, etc.) to the ports with a CAT-5/CAT-5e/CAT-6 network cable. Since the switch supports Auto MDI/MDI-X, you can use either a straight or crossed network cable.
Switch connection to the PSE (Power Source Equipment)
The 1 port of the switch has PoE power device function, you only need to connect the switch PD (Power Device) port directly connected to the PSE port by network cable. It achieves more flexible network applications like this, and it doesn't require external power adapter.
Switch connection to the PD
The 2-5 ports of the switch have PoE power supply function, the maximum output power up to 30W each port, it can make PD devices, such as internet phone, network camera, wireless access point work, you only need to connect the switch PoE port directly connected to the PD port by network cable.
Use an external power adapter (48-52V 1.5A 80W External Power) when you connect non-PoE router to the PD port.
Application examples
Multiple PoE Extenders can be connected every 100 meters to obtain greater distances.
All the ports have PoE power supply function.
1-24 ports have power supply function (see the Datasheet for the max power output).
Check that the IP address of the PC is within the range of the default IP address of the switch (192.168.2.XXX).
If Link indicator does not light up after making a connection, make sure that:
If the Power indicator does not turn on when the power cord is plugged in, make sure that the power outlet or the power cord is not damaged.
Make sure that you use standard RJ-45 cables. Cables that does not meet the standards of the sequence of data may slow down the data transmission speed or even block it.