Skip to end of banner
Go to start of banner

How to replace Server PBX in WMS Network

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Current »

If you need to replace the Server PBX in an existing WMS Network, proceed as follows:

  1. Move all users from Client PBX (future Server)
  2. Disable wms-network on this Client
  3. Delete this Client from PBXs page on Server
  4. Make a backup on Server
  5. Apply this backup on Client

  • No labels