The Guide explains how to connect Mobotix T25 SIP Door Station to a Wildix PBX and configure an unlock button with a video preview before answer.
Created: October 2018
Permalink:
WMS Configuration
Create a Dialplan procedure
To be able to manage calls from the intercom, you need to create a separate Dialplan procedure:
- Go to WMS -> Dialplan -> Dialplan rules
- Click + to add a new procedure
- Specify the called number ("333" in the example) and add a Dialplan application to who can receive calls from the Intercom
Note: You can also add a Called number used for managing calls from the Intercom to the existing procedure used for incoming calls ("users" for example).
Add an Intercom user
- Go to WMS -> Users
- Click + to add a new user
- Fill in the following fields:
- Full name: name of the Intercom user
- Extension: extension number used by the intercom
- Dialplan: select the Dialplan procedure used by the intercom
Mobotix Configuration
SIP Client Settings
Access Admin Menu
Go to Audio and VoIP Telephony -> SIP Client Settings
Fill in the following fields in SIP Account
- SIP Address: enter the extension number of the Intercom user and IP address/ domain name of PBX
Authentification: Enter the extension number and SIP Password
How to generate the SIP Password:
- Go to WMS -> Users and select the intercom extension (409 in our example)
- Click Set passwords
- Click on Generate near SIP/VoIP, then click Ok (copy this password from WMS and use it in the field SIP/VoIP Password (PASTE))
- Available as proxy and Use as Registrar should be checked off
- Server: enter IP address/ domain name of your PBX
- Click Set to save the settings
Outgoing Calls Settings
Go to Audio and VoIP Telephony -> Outgoing Calls Settings
Add a new profile:
- Phone number or SIP Address: specify the number of user/ users who can receive calls from the Intercom
- Dial Attempts and Dial Timeout: specify the number of dial attempts and timeout
- SIP Proxy: select your PBX
- Connection type: select SIP Video
- After the message has been sent: select Intercom
Incoming call settings
- Go to Audio and VoIP Telephony -> Incoming Calls Settings
- Make sure that VoIP is activated in Phone Call-In
Door open function from Wildix IP phones/ Collaboration
Video preview before answer and unlock button
- Go to WMS -> Dialplan -> Dialplan rules and select the Dialplan procedure used for managing intercom calls
- Add 2 Custom applications:
- SIPAddHeader(Camera:http://10.100.4.134/record/current.jpg) - adds a video preview
- SIPAddHeader(Unlock-Button:1) - adds an unlock button