Overview
Indicator | Definition | Status | Description |
---|---|---|---|
PWR | Power indicator | On | The device is powered on |
Off | There is no power supply or power supply is abnormal | ||
RUN | Running indicator | Slow flashing | The device is running normally |
Fast flashing | The device is running normally | ||
Off | The device is running improperly | ||
FXS 1/ FXS 2 | FXS In-use indicators | On | FXS port is currently occupied by a call |
Off | FXS port is currently occupied by a call | ||
WAN/ PoE/ LAN | Network indicators | The device is properly connected to network | |
Off | The device is not connected to network or network connection is improper |
Installation
- Connect the power adapter to the power jack of the device
- Connect telephone line to the FXS port(s)
- Connect network cable to the LAN port and WAN port
Provisioning
Follow our Provisioning of Wildix devices - Admin Guide to provision the gateway.
For remote/ unreachable media gateways behind NAT/Firewall, follow our online Guide to remote provisioning.
Assign analog ports
Follow our online guide to assign the analog ports of the FXS gateway: Assign analog ports of FXS to users.
Reset
- Use the paper clip or the object of the similar shape to press the Reset button
- Keep the button pressed for about 12 seconds
- When PWR and RUN LEDs flash steady, the reset of the Gateway is complete