This Quick Start Guide explains how to provision Wizyconf via WMP and access, participate in conferences.
For the installation and connection, consult Wizyconf Installation Documentation.
Created: July 2019
Minimum WMS version: 4.01.44034.20
Permalink: https://confluence.wildix.com/x/GQAxAw
Provisioning and configuration
WMP Provisioning
Prerequisite: you must have available Wizyconf which you had previously ordered and had it shipped to you.
- Go to WMP -> select a customer
Select the PBX -> click Options button (three dots) and choose Devices from the drop-down list:
Click + to add Wizyconf:
The list of all your available devices opens; select Wizyconf and click Add to assign it to the PBX:
Go to WMS -> Devices: provisioned Wizyconf appears on the list:
Important: After Wizyconf is provisioned, its status in WMS -> Devices stays gray, no IP and firmware are indicated. The password is used by Wizyconf for PBX authentication. Ongoing upgrade procedures are not displayed in WMS.
Assign Wizyconf to user
Important: Before assigning, make sure that a user has Wizyconf License previously purchased on WMP. If the user doesn't have the correct license, the error notification is displayed on Wizyconf.
- Go to WMS -> Devices
Select Wizyconf and click Assign to user
Note: Once the user is assigned, it is impossible to delete him, you can just re-assign Wizyconf to another user. After re-assigning, turn on/ off Wizyconf via Power key on Wizyconf-Core.
Important: 1 Wizyconf account can be used with 1 Wizyconf.
The first upgrade
Note: You may need to connect a mouse and a keyboard for the upgrading procedure.
Prerequisites:
- DHCP Server
- Stable internet connection
Upon the first launch, Wizyconf is automatically upgrades its firmware. The notification about the upgrade is displayed. It takes up 10 minutes to complete the upgrading process (depends on the Internet connection). Then Wizyconf is rebooted automatically.
Notes:
- Wyziconf is upgraded from firmware.wildix.com server
- Port used by Wizyconf: tcp:443
Accessing the conference
When Wizyconf is launched, the Conference List can be accessed. If a Wizyconf user has previously participated in conferences, they are displayed here.
To display new conferences in the List, press Refresh after inviting a Wizyconf user.
Appendix 1. Troubleshooting
Issue 1: The notification "Connection Error" is displayed on Wizyconf.
Reasons:
- There is no Internet connection
- The device is not assigned/ provisioned on WMP
- The PBX is not reachable
Solution: Check all the above mentioned points and press Retry to access the Conference List.
Issue 2: After applying a backup on PBX, it is impossible to access Wizyconf.
Reason: The old password is used instead of the new one.
Solution: Authorize Wizyconf via Collaboration.
- The following notification is displayed on Wizyconf. To authorize the device, enter the code via Collaboration: it can be entered by any user from the PBX to which Wizyconf is assigned:
Go to Collaboration -> click on the Videoconference icon in the top menu
Click Wizyconf Authentication and enter the code:
- Press Retry on Wizyconf