Info |
---|
x-hoppers Changelog: new features and improvements for x-hoppers. Other changelogs: https://www.wildix.com/new-releases-and-updates/ x-hoppers documentation: https://wildix.atlassian.net/wiki/x/RCDOAQ Link for sharing: https://wildix.atlassian.net/wiki/x/AYBID |
x-hoppers Date: 26.03.2024
Improvement
[WMS-18253] - x-hop: added possibility to edit x-hoppers theft alerts (remove camera ID, IP address and group ID, as well as add a message header) which are sent in case of x-hoppers integration with Veesion, when suspicious behaviour is detected in a store
Note: The support starts from WMS Beta 6.06.20240325.1.
How-to:
Add following parameters to the /rw2/etc/pbx/x-hoppers.json file:
a) To remove camera IP, camera ID and group ID:
- "remove_camera_ip": true,
- "remove_camera_id": true,
- "remove_group_id": true,
By default, the values are false and camera IP, ID and group ID are displayed in the theft alert.
b) To add message header:
- "xbees_message_header": "header text"
Documentation will be updated soon: x-hoppers integration with Veesion
x-hoppers Date: 18.03.2024
...
- Double-press the Call button
- By default, audio from the broadcast gets muted for 60 seconds. To unmute the broadcast before the 60-second timeout, double-press the Call button again
- To customize the timeout:
- Create a file /etc/systemd/system/pbx-data-engine.service.d/override.conf:
# vi /etc/systemd/system/pbx-data-engine.service.d/override.conf - And add the following line:
Environment='UNHOLD_TIMEOUT=120'
- Create a file /etc/systemd/system/pbx-data-engine.service.d/override.conf:
Where 120 is the preferred timeout. If you want to disable the timeout, set the value to 0:
Environment='UNHOLD_TIMEOUT=0'
Note: The support starts from WMS Beta 6.06.20240315.1.
...
- W-AIR firmware starting from v 650b2
WMS 6.01.20221122.1 or higher
- Activated x-hoppers
How-to:
...
Note: The support starts from WMS 6.01.20221122.1 or higher
Documentation: x-hoppers Admin Guide
...