Page Comparison

--xhop_voice_login true

When enabled, each time the headset is placed into the charger, it gets unassigned. When a user lifts the headset from the charger:

1. The user is asked to say their name
2. The user should pronounce the name and surname
3. The system looks for the user and assigns the headset to the user

Important: For the feature to start working on the headsets, follow one of the following procedures:

a) After enabling the feature, when using the headsets for the first time, users need to lift the headsets from the charger -> place into the charger -> lift from the charger again.

b) Alternatively, before performing the upgrade and activating the feature, unassign headsets via WMS (Devices -> choose device and click Assign to user -> in the Extension field, choose “unknown”). Then, when users lift the headsets from the charger, they need to press the Call button first.  

Note: The support starts from WMS Beta 6.05.20240119.1.

[WMS-18862] - x-hop: added CLASSOUND DID to each PBX included in the Green Box, to ensure efficient calling experience and give possibility to showcase the remote joining of x-hoppers broadcasts using any device

Documentation: x-hoppers Green Box Documentation