...
Configuration example provided in the chapter Load Sharing Scenario.
| Note |
|---|
The automatic sync is made every 2 hours. |
...
- WP4X0, WelcomeConsole, Vision, SuperVision
- W24FXSR2/W04FXS/W02FXSR2 (except for W01FXS – pre 2015)
- W04FXO
- PRI
- 01/02 BRI
- Collaboration (WEB phone)
- Collaboration Native app (starting from v. 2.1.5)
- Collaboration Chrome extension (starting from v. 1.6.7)
- Incoming SIP trunks (remote operators / devices try to connect to both PBXs)
- WP600AXX (starting from v. 2.8.22)
- Android clients
...
| Warning |
|---|
Important!!! This DNS configuration can be applied only to Wildix devices that support double registration (e.g. Wildix phones of WP4X0 series. The full list of devices can be found in Supported devices & scenarios section, "Supported devices"). On other Wildix devices (check the list in Current limitations section, "Unsupported devices") set up DNS Server = IP address of Main PBX; Secondary DNS: IP address of Failover PBX. |
...