| Html |
|---|
<div id="fb-root"></div>
<script>(function(d, s, id) {
var js, fjs = d.getElementsByTagName(s)[0];
if (d.getElementById(id)) return;
js = d.createElement(s); js.id = id;
js.src = 'https://connect.facebook.net/en_US/sdk.js#xfbml=1&version=v2.11';
fjs.parentNode.insertBefore(js, fjs);
}(document, 'script', 'facebook-jssdk'));</script> |
...
No support for failover mode via /rw2/etc/phone_failover.conf
- No support for failover mode via secondary DNS Configuration
- No Full TLS Support (check the table provided in the Chapter “Device configuration and switching timeout”)
- It’s necessary to configure separate DHCP server in the local network where phones and gateways are connected
- Changes to configurations of the PBX which synchronizes its configuration from another one will be lost after each sync, Admin should apply all changes only on the source PBX
- No notification present on phone’s display when switching to backup PBX in failover scheme
- Unsupported devices (see the chapter “Failover by DNS”):
- W-AIR
- W04BRI
- W01GSM
- W01FXS (pre 2015)
- Outgoing SIP trunks
- iOS clients
- W-PA
- No XML Browser-based services like history / phonebooks when connected to failover PBX
- Call group with ‘Call All 32’ strategy – calls do not work for failover user
- Call through remote PBXs of WMS network does not work if Main PBX is unavailable
- Continuity feature does not work after switch to failover PBX (invalid for WMS 5.0, refer to the chapter Support of user features)
- Pre-answer services do not work after switch to failover PBX (invalid for WMS 5.0, refer to the chapter Support of user features)
- Call to the failover WP480 2015-2016 device can not be completed normally
- Return from semi-attended transfer is not performed
- after transfer from remote user to failover user
- after transfer from failover user to remote user
- BLF presence status of the local user is unavailable for failover user; call can’t be picked up via BLF key
- BLF presence status of the failover user is unavailable for local user; call can’t be picked up via BLF key
- Impossible to perform calls from Kite to failover user via WMS network Server PBX in case main PBX is unavailable
- Email notifications are unavailable for failover user; user features are not available on failover PBX (invalid for WMS 5.0, refer to the chapter Support of user features)
- Login/logout via 99 service is restricted for failover user
- Language and region settings are not synced during sync_pbx script execution
...
Run the following command on a Failover PBX to copy user files (which are encrypted) from a Main PBX:
Code Block scp admin@<pbx A>:/etc/user.d/*.lua /etc/user.d/ or scp -P 2222 admin@<pbx A>:/etc/user.d/*.lua /etc/user.d/ - for Cloud
where <PBX A> is a domain name of a Main PBX.
Then you need to set an owner of the copied files by running the command on the Failover PBX:
Code Block chown wms:wms /etc/user.d/*lua
...