...
- User name: extension number or email address of user ( login login via user name is no longer supported in WMS 4.0X)
- Password: user WEB password
...
- See the list of all the calls and call duration (synced with Wildix PBX)
- View user contact detailsdetails including status
- Listen to call recordings/ view faxes
- Make calls/ start chats
- Archive/ delete calls
...
| Note |
|---|
You can also tap and hold an entry to display the drop-down list |
...
: call the user, archive or delete |
...
the call. |
Dialpad
This menu allows you to search for contacts in PBX phonebooks, place and manage calls.
...
- Otherwise start entering a number or a name into the Search field, then tap on the contact that appears below the Search field. Tap on a number you wish to call:
Call management
1 – Hang up
2 – Hold / Resume
3 – Mute / Unmute
4 – Video
5 – Transfer
6 – Conference (in case there are more than one active calls)
7 – New call
| Note |
|---|
Note: You can also use keypad buttons to mute/ unmute, hold/ resume, hang up and transfer. Refer to Phone overview. |
...
Join ubiconf Videoconference
It is impossible to start Ubiconf videoconference from Vision, you can only participate (you must be invited).
- To participate in a conference, you must be invited by a PBX user. You receive the invitation to chat
- Tap the invitation link to access the conference
- Select Join to enter the conference room or Call to access the conference in audio-only mode. Follow Ubiconf Videoconference User Guide for details
- To leave the conference room, tap Exit the conference (X)
In order not to be distracted by calls received via Phone app, go to Phone App Settings -> Advanced -> Allow usage of other VoIP Apps = ON (in this case Phone app does not open automatically during an incoming call)
...
You can also select the web application to be opened automatically in App Settings -> Advanced -> Default tab and specify timeout after which an application is automatically opened (the default timeout is 120 sec).
Settings
Personal and Call features for each Call class is synced with the PBX.
...
Call features (Call forwarding, call waiting, mobility) for each call class
| Anchor | ||||
|---|---|---|---|---|
|
Internal
- Call reject: ON / OFF tap the switch to set On/ Off
- Call forward Busy / Call forward No Answer / Call forward All. To enable:
- Switch ONOn
- Tap on the destination field underneath
- Enter the number using the phone keyboard or the pop-up keyboard on the screen or enter VOICEMAIL
- Call waiting (receive more than one call at a time): ON / OFF tap the switch to set On/ Off
- Mobility with timeout (receive incoming calls also to your mobile number). To enable:
- Switch ONOn
- Tap the timeout field underneath and enter the numeric value in seconds
...
Same Features as for Internal class, in addition, this menu allows you to select the Ringtone for each Call Class.
Tap the Switch ON to activate the class, then you can change other settings.
...