...
- Configuration sync: all changes must be applied only to Configuration Source PBX
- Supported devices:
- WP (WP600AXX starting from v. 2.8.22)
- W24FXSR2/W04FXS/W02FXSR2 (except for W01FXS – pre 2015)
- W04FXO
- PRI
- BRI
- Collaboration (WEB phone)
- Incoming SIP trunks (remote operators / devices try to connect to both PBXs)
- Failover PBX supports the following call scenarios:
- Internal calls
- Call groups (except for ‘Call All 32’ strategy)
- Calls to/from Wildix gateways
- Calls to/from incoming SIP trunks
- Call transfer
- Return from transfer
- All devices have SIP registration on both main and failover servers simultaneously
Device configuration and switching timeout
...
- Activate WMS network between the PBXs
- Set failover PBX in WMS -> Users -> PBXs:
- Click Failover column near the PBX you wish to set up failover for
- Failover setup dialog opens
- Select the failover PBX from the list
- Click Ok
- Make all the configuration on the main PBX (devices, Dialplan, call groups etc.)
- Make replication for main PBX configuration:
- Access the failover PBX via SSH as root
- Run shell script sync_pbx
- Select 1 (Configure)
- Enter IP of the Main PBX
- Enter the admin password of the Main PBX
- Set failover PBX as secondary DNS server on unsupported devices
...
Make sure all WP phones can resolve the domain pbx.wildixin.com as the local PBX IP, otherwise BLFs, Voicemail Notifications and DND Status will not be shown on the device.
...