| Html |
|---|
<div id="fb-root"></div>
<script>(function(d, s, id) {
var js, fjs = d.getElementsByTagName(s)[0];
if (d.getElementById(id)) return;
js = d.createElement(s); js.id = id;
js.src = 'https://connect.facebook.net/en_US/sdk.js#xfbml=1&version=v2.11';
fjs.parentNode.insertBefore(js, fjs);
}(document, 'script', 'facebook-jssdk'));</script> |
...
| Info |
|---|
The Guide describes the remote provisioning of each Wildix device General information about provisioning: Provisioning of Wildix devices Guide. Updated: February June 2019 Permalink: https://confluence.wildix.com/x/xwQ8AQ |
| Table of Contents |
|---|
| Note |
|---|
Note: Starting from WMS Version 3.88, it is possible to assign unprovisioned devices to users. Available only for devices added via Remote Provisioning (Semi-automatic mode) or WMP. Refer to this chapter of WMS Start Guide for detailed information about assigning to users. |
...
- http://[PBX_IP / PBX_Domain name]/?action=setaps, for instance: http://10.100.1.132/?action=setaps or http://maartentest.wildixin.com/?action=setaps.
- http://[PBX_IP / PBX_Domain name]/?action=setaps&config=xml (only DaySaver/ W01GSM)
| Warning |
|---|
For Virtual / Hardware PBX you can use either IP address or PBX domain name in this Provisioning ULR. If you provision devices to Cloud PBX, please make sure PBX domain name is used in the Provisioning URL, and not the IP address. |
...
- Go to device’s web interface
Credentials for the first time access: administrator : 84117341
- Go to the menu Others -> Auto Config
- Modify the following fields:
- Auto Configuration: select “HTTP”
- HTTP Server: enter the PBX IP address or domain
- Click on on Submit
- Go to the menu Save change
- Click on Save
...
- Go to WMS -> Devices -> W-AIR Networks and click Add to create the network with the added base station
- Select W-AIR Sync Plus in Devices tab and click Configure / Sync device
- Reboot the base station one more time to apply changes
...