Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Warning

Make sure you download the correct firmware for your phone model. The first two digits in the firmware name refer to the phone model (e.g'67'.145.7.104 – firmware version starting from "67" can be only used for WP490GR3). If you have doubts, check the current firmware version used by the phone:

  • WP490GR3 – 67.145.x.xx.rom
  • WP480GR3 – 63.145.x.xx.rom
  • WP490(G)R2 – 59.145.x.xx.rom
  • WP480(G)R2 – 55.145.x.xx.rom
  • WP410R2- 50.145.x.xx.rom
  • Start (ex WP410) – 150.145.x.xx.rom
  • WorkForce - 65.145.x.xx rom
  • WelcomeConsole - 68.145.x.xx.rom

Also make sure you download the correct version of the firmware file. Branch of the recovery firmware (e.g. 67.145.'7'.104) must match with the branch version of the firmware that was previously installed on the phone.

WMS 5.0 / WMS 4.0 firmware:

  • WP480GR3 - 63.145.10.2.rom - LINK
  • WP490GR3 - 67.145.8.81.rom - LINK
  • WorkForce - 65.145.2.4.rom - LINK
  • WelcomeConsole - 68.145.2.11.rom or 68.145.1.89.rom - LINK (download the correct branch 1 or 2, depending on the firmware version that was previously installed on the phone)
  • Start - 150.145.2.10.rom - LINK
  • WP410R2 - 50.145.6.162.rom - LINK
  • WP480(G)R2 - 55.145.6.111.rom - LINK
  • WP480GR3 - 63.145.7.237.rom or 63.145.8.109.rom - LINK (download the correct branch 7 or 8, depending on the firmware version that was previously installed on the phone)
  • WP490(G)R2 - 59.145.6.148.rom - LINK

Earlier WMS 3.88:

  • WP490GR3 - 67.145.7.104.rom - LINK

Step 2. Setting up TFTP server 

...