Warning |
---|
The line of Wildix network switches WSGxxPOE is going EOL after the current stock is over. You can check the availability of items remaining in stock on WMP. |
Scroll export button | ||||||||
---|---|---|---|---|---|---|---|---|
|
...
Note |
---|
Firmware version: V103SP6D180529 and Firmware version: V103SP7D230713 |
Upgrade the switch
- Download the firmware from Google Drive: https://drive.google.com/drive/folders/1KSkyO5Plf8DckvhH3dENsJ8MDDJ8uxcI or the latest version of firmware https://drive.google.com/file/d/1jiA3Md2Wob2wBB7vltMWPujFu5plR_er/view?usp=sharing
Access the web interface of the switch, Menu System-> System Update to upgrade the switch After the upgrade to this version the switch must be reset: press and hold the Reset button for about 5 sec.
...
In our example the Pool ID 2 is associated to Vlan 2 and is used to assign IP addresses from the following range: 192.168.100.1 - 192.168.100.255 (external DHCP server for PC will be connected to port 1):
External DHCP
Note |
---|
To disable Voice VLANs and internal DHCP server, and to enable only the external DHCP to release IP addresses, you have to disable Voice Vlan in Vlan Management → Voice VLAN |
...
Set the ports 9-10 for aggregation of port 1, the aggregation port 1 can build switch links if connected to another switch aggregation port 1:
Port Mirroring
Open port mirror feature
All packets on the source port are copied and forwarded to the destination port, destination port is usually connected to a packet analyzer to analyze the source port, multiple ports can be mirrored to a destination port.
...
Ports that have been added to the aggregate port aren't also capable of being a destination port and source port. Destination port and source port cannot be the same.
Configuration example
VLAN Management
Manage:
- Vlan Config
- Voice VLAN
...
Set trusted port and prohibited port:
Verify source MAC address and set server IP address:
Set option82 information:
...
Set port 14 as a secure port
Anti Three Bind
Allows to bind IP address and MAC address
...
1 warning threshold is set to 80 chip, chip 2 warning threshold is set to 100, chip 3 alarm threshold is set to 120:
PoE port config
PoE port configuration: enable / disable, set port priority, set up detection mode and max power
...
Change the region to DEADBEEF0102, region name is 123, instance 4 is mapped to a VLAN 2:
MSTP Bridge
Enable STP bridge function, set up bridge priority
...