...
...
| Scroll export button | ||||||||
|---|---|---|---|---|---|---|---|---|
|
| Info |
|---|
This Guide explains how to get the location of the nearest W-AIR Base Station in W-AIR Network in case of emergency alarm triggered on W-AIR Handset.
Created: December 2020 Updated: April 2022 Permalink: https://confluencewildix.wildixatlassian.comnet/wiki/x/UoPPBVxLOAQ |
| Table of Contents |
|---|
Description
...
| Note |
|---|
What is the RPN of the base station? RPN can be found on the W-AIR base station's interface → Home/ Status tab, RFPI Address; in the example below the RPN of the base station is "00":
|
Video:
| Scroll only inline |
|---|
https://fast.wistia.com/embed/medias/31h8jlqvwi |
| easy-html-macro |
|---|
<script src="https://fast.wistia.com/embed/medias/31h8jlqvwi.jsonp" async></script><script src="https://fast.wistia.com/assets/external/E-v1.js" async></script><span class="wistia_embed wistia_async_31h8jlqvwi popover=true popoverAnimateThumbnail=true" style="display:inline-block;height:315px;position:relative;width:560px"> </span> |
...
- Go to the web interface of the Primary W-AIR Base Station -> Management
- Enable Text Messaging
- Set PBX as Text Messaging & Alarm Server
- Change Text Messaging Port to 9300
- Save and Reboot the W-AIR base
_censored.jpg?version=1&modificationDate=1607359650000&cacheVersion=1&api=v2&height=187)
Step 2: Set Alarm Signal as Message in Alarms Profiles
...
Here is an example of how you can specify called numbers:
In this example:
- 000 and 004 are called in case the handset is located close to the base station with RPN 00:
- 000 - in case it is a Man Down alarm,
- 004 - in case it is a Red Button alarm.
...
For each XXX called number, you can use Dialplan application Play sound and specify the phrases that should be pronounced using the TTS service. For example:
In this example the following phrases are used:
...
- establish WMS Network between Cloud PBX and Virtual/ Hardware PBX
- provision W-AIR Bases on Cloud PBX and set up W-AIR Network
- assign a user from Cloud PBX to W-AIR Headset (this user will trigger an alarm)
- assign a user from VM/ HW PBX to any device (this user will receive an emergency call)
- configure Alarm and Text Messaging & Alarm Server on Main W-AIR Base using VM/ HW PBX IP
- run PBX configuration and create Dialplan on VM/ HW PBX IP
...
...
| Macrosuite divider macro | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
| Button macro | ||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|