| Html |
|---|
<div id="fb-root"></div>
<script>(function(d, s, id) {
var js, fjs = d.getElementsByTagName(s)[0];
if (d.getElementById(id)) return;
js = d.createElement(s); js.id = id;
js.src = 'https://connect.facebook.net/en_US/sdk.js#xfbml=1&version=v2.11';
fjs.parentNode.insertBefore(js, fjs);
}(document, 'script', 'facebook-jssdk'));</script> |
| Html |
|---|
<div class="fb-like" data-href="#" data-layout="button_count" data-action="recommend" data-size="large" data-show-faces="true" data-share="true"></div> |
...
| Scroll export button | ||||||||
|---|---|---|---|---|---|---|---|---|
|
| Info |
|---|
This document contains basic PBX configuration for the USA Created: December 2018 Permalink: https://wildix.atlassian.net/wiki/x/ahTOAQ |
| Table of Contents |
|---|
Here you will find some basic settings when installing for a Wildix PBX residing in the USA. For a detailed step-to-step instruction on installing a Wildix PBX, please refer to WMS Start Guide.
1 - Language and region settings
WMS → PBX → Language & region
1 - Language: English-US
2 - Default Tone Zone: United States / North America
3 - Country Code: 1 USA
4 - Time zone (time zone where the PBX resides): US / Eastern
2 - Dialplan for outgoing calls
WMS → Dialplan, "users"
1 - +XXXX.
The pattern +XXXX. allows calling any phone number starting with + and containing a minimum of 4 characters. This section allows placing calls from Call History. Dialed numbers are stored in the Call History after being normalized with + (+E164). Pay attention that the first symbol + is deleted from the called number before the call is sent to the trunk.
| Note |
|---|
Notice the set portion of the dial the trunk has "called number -1" indicating that one digit is being stripped. If your carrier does not allow a 1 to be sent with the 10 digit number, you may need to remove 2 digits to have the system send only the 10 digit number with no leading + or 1. |
2 - 1XXX.
The pattern 1XXX. allows calling any phone number starting with 1 and containing a minimum of 4 characters. This section addresses dialing 1+10 digits. Number is sent to the trunk after the leading 1 is deleted. In this scenario the carrier expects 10 digits only.
| Note |
|---|
Some carriers accept or even require the leading 1. In such a case, the removal of one digit should not be performed (see the set portion of the dial the trunk is set to number -1) |
3 - XXXXXXXXXX
This section addresses dialing 10 digits. Number is sent to the trunk as is. In this scenario the carrier expects 10 digits only.
| Note |
|---|
Notice the set portion of the dial the trunk is set to called number (no transformation of the dialed number) |
4 - 911
911 dialing. If the customer is expected to dial 9+911 , then another entry for called number 9911, similar to this one must be created as well.
| Note |
|---|
Often, a specific caller ID number must be sent for 911 calls. In such a case, use the "Set" dialplan application to set the caller number before sending the call out to the trunk with the "Dial the trunk" application. |
5 – Included procedures
This is a "last resort option". If nothing else is matched in the Dialplan, the dialed number is matched against users and feature codes via this included procedures entry. It uses a built-in rule that does this automatically rather than having to make entries in the Dialplan for every user and feature code.
| Note |
|---|
"pbxinternal" procedure is already present by default in the Included procedures of the "users" procedure. |
3 - Dialplan General settings
WMS → Dialplan → Dialplan General Settings
1 - International Prefix: it is 011 for the USA
2 - National Prefix: it is 1 for the USA
...
...
| Macrosuite divider macro | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
| Button macro | ||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|