Scroll export button | ||||||||
---|---|---|---|---|---|---|---|---|
|
...
Device | BackOffice | HelperHopper | SalesFloorHopper | SalesFloorHopper + AI | SuperHopper + AI | |
---|---|---|---|---|---|---|
Ideal for: | For SIP devices | Administration and support users who don't face customers | Customer care, contact center, users who need access to integrations | Retail assistants who work on the shop floor | Retail assistants who work on the shop floor | Managers and supervisors |
Free minutes for outbound calls | 100 min | 3000 min | 3000 min | 3000 min | 3000 min | 3000 min |
SMS included | 100 sms | 200 sms | 1000 sms | 1000 sms | 1000 sms | 1000 sms |
Chats and videoconferencing | ➖ | ✅ | ✅ | ✅ | ✅ | ✅ |
Using x-bees apps | ➖ | ✅ | ✅ | ✅ | ✅ | ✅ |
Adding guests to conversations | ➖ | ➖ | ✅ | ✅ | ✅ | ✅ |
Integrations | ➖ | ➖ | ✅ | ✅ | ✅ | ✅ |
Personal contact-me link, meeting scheduler, website widget | ➖ | ➖ | ✅ | ✅ | ✅ | ✅ |
Website widget setup | ➖ | ➖ | ➖ | ➖ | ➖ | ✅ |
Max number of devices / calls | Up to 1 device / 2 calls | Up to 10 devices / 4 calls | Up to 10 devices / 8 calls | Up to 10 devices / 8 calls | Up to 10 devices / 8 calls | Up to 10 devices / 8 calls |
Contact center events logging | ➖ | ➖ | ✅ | ✅ | ✅ | ✅ |
DECT headset included | ➖ | ➖ | ➖ | ✅ | ✅ | ➖ |
Internal broadcast channel | ➖ | ➖ | ➖ | ✅ | ✅ | ➖ |
Customer service powered by AI prompts | ➖ | ➖ | ➖ | ➖ | ✅ | ✅ |
Wallboard and analytics | ➖ | ➖ | ➖ | ➖ | ➖ | ✅ |
Note | ||
---|---|---|
Note:
|
...
- The user is asked to say their name
- The user should pronounce the name and surname
- The system looks for the user and assigns the headset to the user
Each time the headset is placed into the charger, it gets unassigned and gets Service license type in the system.
Note |
---|
Important: For the feature to start working on the headsets, follow one of the following procedures: a) After enabling the feature, when using the headsets for the first time, users need to lift the headsets from the charger -> place into the charger -> lift from the charger again. b) Alternatively, before performing the upgrade and activating the feature, unassign headsets via WMS (Devices -> choose device and click Assign to user -> in the Extension field, choose “unknown”). Then, when users lift the headsets from the charger, they need to press the Call button first. |
Enable user verification by voice
Also, you can configure the logic of verifying users' identity by voice footprint. When this feature is enabled, during user authorisation the system compares the voice of the user with user voices previously saved in the system and in case of a match, allows authorisation. This eliminates the risk of user logging in under a different name.
See instructions for below:
Note |
---|
Note:
|
1. Install the specific libraries to enable verification of identity by voice using the following command:
Code Block |
---|
pip install librosa |
2. Set up a Dialplan to allow employees leave their voice footprints in the system, which will later be used for verification.
You can download the Dialplan example here: x-hoppers_auth.bkp
Once the Dialplan is set up, employees should call the number provided in the Dialplan and follow the audio instructions to record their voice footprints.
Note |
---|
Note: Each new employee should follow the procedure first, before trying to log in to the headset, as in case user voice footprint is missing in the system, authorisation will not be allowed. |
2. Add the following variable to WMS -> Dialplan -> General Settings -> Set dialplan variables field and click Save:
Code Block |
---|
XHOP_VOICE_AUTH=yes |
When the feature is enabled, upon lifting the headset, users are prompted to say their name and surname. The system matches the pronunciation with user records and assigns the headset. Each time the headset is placed into the charger, it gets unassigned and gets Service license type.
5. Configure Dialplan
Modify the users dialplan as follows:
...
Note |
---|
Note:
|
...
Record in-store conversations (listen in CDR-View)
Starting from WMS 6.03.20230630.3, it is possible to record in-store conversations and listen them via CDR-View. The recording starts when user unmutes himself in the conference and begins talking.
...