...
Panel | ||||||||
---|---|---|---|---|---|---|---|---|
| ||||||||
If you need any guidance, follow the instructions in W-AIR Headset User Guide. |
Step 4. Updating Firmware
Anchor | ||||
---|---|---|---|---|
|
To update the firmware of the Base Station, navigate to Devices tab, select the Base and click Configure/ Sync device button. Wait for several minutes, note that during the update, the device is rebooted. As soon as the update procedure is finished, the new fw version appears in Devices tab and the Base Station is no longer marked with the blue color
After successful registration of W-AIR Headsets, put them into the Charger to update firmware. You can check the progress on the web interface of the W-AIR base
...
Tip |
---|
This step is temporary until the stable firmware version is released. Before installing this custom package, make sure to update the Base Station and the Headsets as described in this section. |
Download the firmware package: https://drive.google.com/file/d/1xFin3lGk581LX-32fWaGXl9Hv3dbalFe/view?usp=drive_link
Upload the package from your PC to the PBX using the FileZilla tool (SFTP) or the console
Code Block scp -P2222 wms-wildixair-firmwares_6.05.20230926.1~786e2dc8_all.deb admin@pbx_domain.wildixin.com:/home/admin
admin@pbx_domain.wildixin.com -> insert your PBX domain name
Access home/admin directory
Code Block cd /home/admin/
Unpack the package
Code Block dpkg -i wms-wildixair-firmwares_6.05.20230926.1~786e2dc8_all.deb
Navigate to WMS Devices menu, select the W-AIR Base Station and click Configure / Sync device
W-AIR Headsets start updating, you can check the status on the Base station’s Station’s web interface
Panel | ||||||||
---|---|---|---|---|---|---|---|---|
| ||||||||
Note: Detailed description on W-AIR Headsets firmware update can be found in W-AIR Headset User Guide, “Update of the Firmware” section. |
...