Page Comparison

<div id="fb-root"></div>
<script>(function(d, s, id) {
  var js, fjs = d.getElementsByTagName(s)[0];
  if (d.getElementById(id)) return;
  js = d.createElement(s); js.id = id;
  js.src = 'https://connect.facebook.net/en_US/sdk.js#xfbml=1&version=v2.11';
  fjs.parentNode.insertBefore(js, fjs);
}(document, 'script', 'facebook-jssdk'));</script>

...

...

1. First, you need to disable Disable limitations for DNS queries on the main PBX. Consult the following documentation on how to do it:   /wiki/spaces/DOC/pages/30279583 
   
   
2. Check the provisioning file /rw2/etc/provision.conf and in case it contains the parameter FailoverbyDNS=yes, change its value to ‘no’:
   FailoverbyDNS=no
   
   Documentation: Provisioning Custom Settings
   
   

3. Provision DaySaver

   on

   to PBX in an automatic mode (Auto-provisioning).
   
   Documentation: Provisioning of Wildix devices - Admin Guide

   Go to

   Note
   Note: Sometimes you may need to wait for up to 5 minutes before DaySaver gets provisioned.

   
   

4. Configure the following settings in the WMS:
   
   
   1. In WMS -> Devices
   ->
   1. , select the
   device you're configuring, clickEdit and add two custom DNS servers
   1. DaySaver and clickEdit. 
   2. Fill out DNS server fields as mentioned below:
      
      
      • DNS Server:
   paste
   1. • enter the IP address of the main PBX
    IP
   1. •  
      • Secondary DNS: enter the IP address of the failover PBX
   IP
   1. • 
        
   Also, enable
   1. • 
        
   2. Enable the checkbox Use received IP and click Save.
   Then, select the device and click
   1. Click Configure/ Sync the device for the DNS settings to apply.
   
   Device
   1. The DaySaver should now reboot. If it doesn’t, reboot it from the web interface.
      
      
5. In the custom provisioning filenano-tiny  /rw2/etc/provision.conf, add the parameter FailoverbyDNS=yes and add the section [daysaver]. 
   
   Documentation: Provisioning Custom Settings
   
   
6. In WMS -> Devices, clickConfigure/ Sync the device again. The device should reboot.   If it doesn’t, reboot it from its web interface.Then, check

7. Check SIP configuration on the web interface of the device:

   in

   the SIP Server Address and Outbound Proxy Address fields

   there

   should

   be

   contain the domain name auto-wildixin.com.