Html |
---|
<div id="fb-root"></div> <script>(function(d, s, id) { var js, fjs = d.getElementsByTagName(s)[0]; if (d.getElementById(id)) return; js = d.createElement(s); js.id = id; js.src = 'https://connect.facebook.net/en_US/sdk.js#xfbml=1&version=v2.11'; fjs.parentNode.insertBefore(js, fjs); }(document, 'script', 'facebook-jssdk'));</script> |
...
W-PA SIP Public Announcer is used to broadcast emergency messages and communication in large environments such as shopping malls, supermarkets, airports, hospitals. The device has 10 Watt audio output and it still allows you to connect external loudspeakers and microphones. It can also act as a relay for activating door release switches or door locks via 1 embedded short-in detect port and 1 short-out control port. See /wiki/spaces/DOC/pages/30281148 for detailed technical characteristics.
...
First, you need to set up a Dialplan to enable the device to answer calls automatically. For this purpose, use Intercom/ Paging group Dialplan. The detailed information about Dialplans can be found here: Dialplan applications Admin Guide
Note Note: W-PA SIP Public Announcer supports Paging over RTP multicast. Consult Paging Admin Guide for detailed information.
After you set up a Dialplan, you can call the extension number you've assigned the device to from any Wildix IP phone/ Collaboration/ Mobile app
W-PA will auto answer and play back your voice over connected speakers/ a microphone
If you want to finish broadcasting, press a Hang up button on the device you use for placing a call to hang up
Ringtone Amplifier function
Starting from W-PA firmware version 2.1.1.3664, the device can be used as a ringtone amplifier.
- Assign W-PA to the same extension as a user
- Each time a user receives a call, W-PA starts ringing with an amplified ringtone
Note |
---|
Note: A speaker should be connected to the device. Depending on the power and parameters of external speakers, you may need to configure the audio parameters manually on the web interface, for the most comfortable use of the device. |
Factory reset
In case you need to reconfigure your W-PA, you should perform a reset procedure.
...