Html |
---|
<div id="fb-root"></div> <script>(function(d, s, id) { var js, fjs = d.getElementsByTagName(s)[0]; if (d.getElementById(id)) return; js = d.createElement(s); js.id = id; js.src = 'https://connect.facebook.net/en_US/sdk.js#xfbml=1&version=v2.11'; fjs.parentNode.insertBefore(js, fjs); }(document, 'script', 'facebook-jssdk'));</script> |
...
Info |
---|
This Quick Start Guide explains how to provision Wizyconf via WMP and access, participate in conferences. For the installation and connection, consult Wizyconf Installation Documentation. Created: September 2019 Minimum WMS version: 4.01.44034.20 Permalink: https://confluence.wildix.com/x/GQAxAw |
Table of Contents
Prerequisites
...
The first upgrade
Prerequisites:
- DHCP Server Server (if not available, set up a static IP address as described in Chapter
- Stable internet connection
- Wizyconf must be able to reach the PBX via its public IP (even in case the PBX is local)
- It's necessary to set up a static IP on the Wizyconf:
- Press Home button; Press Google chrome icon → tap on three dots in the upper right part of the screen → tap Settings
- Tap arrow down icon near Network
- Disable the switch "Configure IP address automatically" and then specify the IP address, the Routing prefix (the subnet mask) and the Gateway (the IP address of your router)
Upon the first launch, Wizyconf automatically upgrades its firmware. The notification about the upgrade is displayed. It takes up to 10 minutes to complete the upgrading process (depends on the Internet connection). Then Wizyconf is rebooted automatically.
...
Appendix 1. Troubleshooting
Set up static IP address on Wizyconf
If DHCP is not available, it's possible to set up Static IP:
- Press Home button; Press Google chrome icon → tap on three dots in the upper right part of the screen → tap Settings
- Tap arrow down icon near Network
- Disable the switch "Configure IP address automatically" and then specify the IP address, the Routing prefix (the subnet mask) and the Gateway (the IP address of your router)
Notification "Connection Error" is displayed on Wizyconf
...