...
x-hoppers provides an active channel to colleagues and support anywhere in the store, connects clerks, allowing to easily communicate with each other in one conference as a broadcast as well as receive incoming calls.
As an x-hoppers user, you are connected to a conference broadcast in Retail mode (muted by default). If you want to talk in the conference, simply press a button to unmute yourself. Besides, you can accept incoming calls, after which you are automatically returned to the conferencebroadcast.
x-hoppers
...
Headset Overview
1 - Microphone
2 - Mute button
...
| Note |
|---|
Note: There are 2 button combinations that have to be pressed at the same time: Register - Call, Volume+ and Volume- Power off - AUX function, Volume+ and Volume- |
LED indicators
...
overview
Color | LED indication | Status |
Green | Short blink followed by long blink | Power Up |
Fast short blink, repeated | Incoming call | |
Single short blink. Notification of call only via audio in HS | 2nd incoming call, call active | |
Single short blink | In call | |
Long blink | Battery charging | |
Steady on | Battery charging, full | |
Red | Long blink followed by short blink | Power Down |
Fast, short blink | Low battery | |
Steady on | Battery charging, low battery | |
Long blink | Registration failed | |
Single short blink repeated slow | Idle, out of range | |
Blue | Short blink repeated fast | Registration, ongoing |
Long blink | Registration completed | |
Single short blink repeated slow | Idle, connected | |
Purple | Steady on | Menu |
None | Deregistered |
...
- Silent charging: Headset deactivated
The headset is disconnected and can’t receive calls while charging. - Audio feedback: BeepsVoice
User hears beeps voice prompts as user audio feedback when available.
Usage
How to mute/ unmute
- Mute button: press the button to unmute and be able to speak in the conferencebroadcast. All people in the conference broadcast can hear you. You stay unmuted till the Mute button is pressed again.
- Call button: press and hold the button to get unmuted. You stay unmuted only while pressing the button. When the button is released, the headset goes back to mute.
...
| Warning |
|---|
Important: In the Retail mode, the headset doesn’t differentiate between the conference broadcast and an incoming call, which means the headset stays muted after accepting the call, until manually unmuted. Check the How to mute/ unmute section of this guide. |
...
- Double-click the Call button to swap between two active calls or between a call and the conferencebroadcast.
Reject an incoming call
...
| Note |
|---|
Note: After the call is ended, the headset automatically rejoins the conferencebroadcast. |
| Html |
|---|
<div class="fb-like" data-href="#" data-layout="button_count" data-action="recommend" data-size="large" data-show-faces="true" data-share="true"></div> |
...