| Html |
|---|
<div id="fb-root"></div>
<script>(function(d, s, id) {
var js, fjs = d.getElementsByTagName(s)[0];
if (d.getElementById(id)) return;
js = d.createElement(s); js.id = id;
js.src = 'https://connect.facebook.net/en_US/sdk.js#xfbml=1&version=v2.11';
fjs.parentNode.insertBefore(js, fjs);
}(document, 'script', 'facebook-jssdk'));</script> |
...
| Info |
|---|
The manual provides you with the necessary information about your DECT handset W-AIR 70 / W-AIR 100 / W-AIR 150. Please read this guide to ensure the proper installation and operation of the DECT handset. Printable End user brochures in different languages are available at this link: W-AIR - End User Brochures Updated: July 2016 Permalink: https://confluence.wildix.com/x/jQSIAQ |
| Table of Contents |
|---|
Before using the handset
...
Compatible headsets:
Wildix headsets: http://www.wildix.com/voip-phones-and-headset/#headsets
Third party headsets integrated with Wildix: Wildix Compatible Headsets – Jabra, Plantronics, Sennheiser, JPL, Axtel
...
- During a call press Transfer Soft key (the current call is put on hold)
- Enter the number or press Selection key to search in Contacts or Central directory
- Press Transfer Soft key
...
| Note |
|---|
Note: As W-AIR Handsets support only 2 calls/ channels, it is impossible to transfer a call to third party since one more channel couldn't be opened. For this purpose, you can use in-call Feature codes (it doesn't require opening a new channel): #8 for attended transfer and #9 for blind transfer. Consult Feature Codes and Pre answer Services Guide for detailed information. |
Establish a conference call between three parties:
...
Use Wildix Bluetooth headset WHS-BT: WHS, WP490EXT, WPEHS – Quick Start Guide.
Third party headsets integrated with Wildix: Wildix Compatible Headsets – Jabra, Plantronics, Sennheiser, JPL, Axtel.
...
For more information about configuring emergency settings, please refer to W-AIR system – Administrator Manual.
Alarms triggering
Alarm Button: Long-press (3 seconds) the red button on top of the handset
- Pull Cord Alarm: Pull a cord from the pull cord hole on the right side of the handset
- Running Alarm: Shake up and down the handset for several seconds
- Man Down Alarm: Put the handset in the position with an angle over 60 degrees with respect to the horizontal. The time for the handset to be still before the alarm is triggered can be set on base station web interface
- No Movement Alarm: Do not move the handset. The timeout after which No Movement alarm is triggered is set on the base station web interface
...