Versions Compared

Old Version 6

changes.mady.by.user Ksenia Babych

Saved on

compared with

New Version 7

changes.mady.by.user Ksenia Babych

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.



Html
<div id="fb-root"></div>
<script>(function(d, s, id) {
  var js, fjs = d.getElementsByTagName(s)[0];
  if (d.getElementById(id)) return;
  js = d.createElement(s); js.id = id;
  js.src = 'https://connect.facebook.net/en_US/sdk.js#xfbml=1&version=v2.11';
  fjs.parentNode.insertBefore(js, fjs);
}(document, 'script', 'facebook-jssdk'));</script>

...

Info

The Guide describes the remote provisioning of each Wildix device.

Updated: February 2018

Permalink: https://confluence.wildix.com/x/xwQ8AQ


Table of Contents

Step 1: Generate a provisioning link on WMS

...

  • Insert the device’s Mac Address into the field  and click Next:

Note

Note: usually Mac Address is

...

located on the rear panel of your device.


 

  • After the provisioning link has been generated, copy the Provisioning URL

Please, use the option Copy Link Address in order to copy the complete string of the provisioning URLmake sure that the provisioning URL is copied properly, without any spaces.

Here are examples of a Provisioning URL:
http://[PBX_IP]/?action=setaps&config=xml (W01GSM)
http://[PBX_IP]/?action=setaps (other devices)

...

  • Go to device’s web interface
    Credentials for the first time access: admin : admin
  • Go to menu Upgrade -> Advanced
  • Insert the provisioning URL into the field “URL”
  • Click Autoprovision AutoP Immediately 


Device is now rebooting (the phone screen indicates that the device is rebooting; after ). After the reboot, you can see the date and time, soft keys and “login0X” on the screen )of the device.

WP4X0 old generation and WP500

  • Go to device’s web interface
    Credentials for the first time access: admin : admin
  • Go to the menu Upgrade -> Advanced
  • Insert the provisioning URL into the field “URL”
  • Click on Confirm to save URL
  • Click Auto provision

Device is now rebooting (the phone screen indicates that the device is rebooting; after ). After the reboot, you can see the date and time, soft keys and “login0X” on the screen )of the device.

WP600

Note

Note: this This is WP600 old generation (pre 2015); new generation WP600AXX do not support provisioning via WMS, for configuration of WP600AXX (both remote and local), follow the steps described here: WP600A / WP600ACG – User Guide.

...

  • Go to device’s web interface
    Credentials for the first time access: admin : admin
  • Go to the menu Phone -> Auto Provision
  • Insert the provisioning URL into the field “Server URL”:


  • Click on Autoprovision Now

Device is now rebooting (the phone screen indicates that the device is rebooting; after ). After the reboot, you can see the date and time, soft keys and “login0X” on the screen )of the device.

W01GSM

  • Go to device’s web interface
    Credentials for the first time access: admin : admin
  • Go to the menu System -> System Configuration
  • Insert the provisioning URL into the field “Primary Profile URL”

...

  • Go to device’s web interface
    Credentials for the first time access: admin : admin OR admin : wildix (depending on the fw version)
  • Go to the menu Device Setting Setting -> Provisioning
  • Select Provisioning Type: HTTP and enter Insert the provisioning URL into the field “HTTP Config URL”
  • Make sure that the following parameters are correct:
    • HTTP Config URL: insert the provisioning URLProvisioning type: HTTP
    • Refresh Interval (minute): enter the value “14400”14400


  • Click Apply
  • Change the URL address: delete instead of "/home.asp and " add : "/Maintenance.asp" to the URL
    Example: http://

...

...

...

...

  • Select Reboot and press Apply

...

  • Go to device’s web interface
    User name for the first time access

...

  • : public, no password

...

  • needed
  • Go to the menu Management -> Configuration Scripts
  • Fill in the following fields inside the section “Execute Scripts”:
    • Specific File Name: insert the part of the provisioning URL without the PBX IP address: ?action=setaps
    • Transfer Protocol: select “HTTP”
    • Host Name: enter the PBX IP address or domain name
  • Click on Submit Apply & Execute Now 


Device is now rebooting.

...

  • Go to device’s web interface
    Credentials for the first time access: admin : admin
  • Go to the menu Management -> Provision
  • Fill in the following fields:

    • URL: insert the provisioning URL 

      Warning

      Important: make sure the IP address is used inside the provisioning URL, domain names are currently not supported.

    • Check Interval: enter the value "604800" 604800
  • Click Save


W01FXS

...

/ W02FXS 2014

  • Go to device’s web interface
    Credentials for the first time access: admin : admin
  • Go to the menu Management -> Auto Provision
  • Fill in the following fields:
    • Provision Active: select “HTTP”
    • HTTP Server: enter the PBX IP address or domain
  • Click Submit

...

  • Go to device’s web interface
    Credentials for the first time access: 

...

  • administrator :

...

  • 84117341
  • Go to the menu Others -> Auto Config
  • Modify the following fields:
    • Auto Configuration: select “HTTP”
    • HTTP Server: enter the PBX IP address or domain
  • Click on Submit


  • Go to the menu Save change
  • Click on Save:


Device is now rebooting.

W-AIR

  • Go to device’s web interface
    Credentials for the first time access: admin : admin
  • Go to the menu Management
  • Modify the following fields:
    • Management Transfer Protocol: select “HTTP”
    • Configuration File Download: select “Base and Multi Cell Specific File”
    • Configuration Server Address: enter the PBX IP address
    • Base Specific File: insert the part of the provisioning URL without the IP address of the PBX: ?action=setaps
    • Multi Cell Specific File: the same value as in Base Specific File
    • Configuration File Download: select “Base and Multi Cell Specific File”
  • Click on Click  Save and Reboot



Device is now rebooting.

After you have created the W-AIR Network in the rebooting:

  • Go to WMS -> Devices -> W-AIR Networks

...

  •  and click Add to create the network with the added base station
  • Select W-AIR in Devices tab and click Configure / Sync device
  • Reboot the base station one more time to apply changes

W-AIR Small Business

  • Go to device’s web interface
    Credentials for the first time access: admin : admin
  • Go to the menu Management
  • Modify the following fields:
    • Management Transfer Protocol: select “HTTP”
    • Configuration Server Address: enter the PBX IP address
    • Base Specific File: insert the part of the provisioning URL without the IP address of the PBX: ?action=setaps
    • Configuration File Download: select “Base Specific File”
  • Click on Save and Reboot

...

  • Use first time access credentials: admin : admin
  • Go to menu System -> Auto Provision -> Static Provisioning Server 
  • Modify the following fields:
    • Server Address: enter your PBX host address or public IP
    • Configuration File Name: ?action=setaps
    • Protocol Type: HTTPS
  • Click Apply


  • Go to menu System -> Tools -> Reboot phone
  • Click Reboot
  • Confirm the reboot by clicking OK

...