| Html |
|---|
<div id="fb-root"></div>
<script>(function(d, s, id) {
var js, fjs = d.getElementsByTagName(s)[0];
if (d.getElementById(id)) return;
js = d.createElement(s); js.id = id;
js.src = 'https://connect.facebook.net/en_US/sdk.js#xfbml=1&version=v2.11';
fjs.parentNode.insertBefore(js, fjs);
}(document, 'script', 'facebook-jssdk'));</script> |
...
| Info |
|---|
This guide explains how to install and use W-PA SIP Paging Gateway and provides a description of its basic functions. Created: December 2017 Permalink: https://confluence.wildix.com/x/BQAVAQ |
| Table of Contents |
|---|
W-PA SIP Public Announcer Introduction
W-PA SIP Public Announcer is used to broadcast emergency messages and communication in large environments such as shopping malls, supermarkets, airports, hospitals. The device has 10 Watt audio output and it still allows you to connect external loudspeakers, and an external microphone. It can also act as a relay for activating door release switches or door locks via 1 embedded short-in detect port and 1 short-out control port (See Appendix 1 for more information).
Before using W-PA
Please read the following safety notices before installing or using this W-PA. They are crucial for the safe and reliable operation of the device:
...
- Do not put any foreign objects into the ports of the device. It may cause electric shock or injury accident. If any foreign object gets inside the device, please stop using it
- Do not let non-technical staff to remove or repair the device. Consider that improper repair may lead to injury accident or cause damage of the device
Packing list
Before you start to install W-PA, please verify that your package contains the following items:
- 1 x W-PA SIP Public Announcer
- 1 x ground screw
W-PA Overview
Front panel
1 - PC interface: connect the device to PC (optional)
...
8 - Ground screw: connect external parts with metal housing to this interface to prevent static electricity and other interference caused the equipment to work abnormally
Rear panel
1 - Speaker interface: according to the device input voltage adaptive output maximum power; 4Ω speaker, POE / 8W, 12V / 10W, 18V / 20W, 24V / 30W. The greater the horn impedance, the smaller the output power. Suggested wire diameter: 18AWG or larger diameter
...
| Note |
|---|
Note: a power adapter is optional and used for power supply of any external connected equipment. |
Instalation of W-PA SIP Public Announcer
Connecting W-PA
- Use five or super five network cable to connect your W-PA to the network
- Connect the cable to WAN (PoE) port
Provisioning of W-PA
Wildix supports different provisioning modes:
...
Refer to the chapter W-PA provisioning of the guide Remote provisioning of Wildix devices for remote provisioning details.
Assign to user
To assign a user to your W-PA SIP Public Announcer:
...
| Note |
|---|
Note: In case you have configured failover PBX for your main PBX, the W-PA will have 2 SIP accounts. |
Public Announcer function
Once the device is installed and configured, you can use it as a Public Announcer for broadcasting purposes.
...
- First, you need to set up a Dialplan to enable the device to answer calls automatically. For this purpose, use Intercom/ Paging group Dialplan. The detailed information can be found here: Dialplan applications User Admin Guide - English
After you set up a Dialplan, you can call the extension number you've assigned the device to from any Wildix IP phone/ Collaboration/ Mobile app
The device will auto answer and play back your voice over connected speakers/ a microphone
If you want to finish broadcasting, press a Hang up button on the device you use for placing a call to hang up
Factory reset
In case you need to reconfigure your W-PA, you should perform a reset procedure.
...