Html |
---|
<div id="fb-root"></div> <script>(function(d, s, id) { var js, fjs = d.getElementsByTagName(s)[0]; if (d.getElementById(id)) return; js = d.createElement(s); js.id = id; js.src = 'https://connect.facebook.net/en_US/sdk.js#xfbml=1&version=v2.11'; fjs.parentNode.insertBefore(js, fjs); }(document, 'script', 'facebook-jssdk'));</script> |
...
Info |
---|
This guide explains how to use paging on a Wildix system. Created: March 2018 Updated: July 2018 Permalink: https://confluence.wildix.com/x/vAc8AQ |
Table of Contents |
---|
RTP multicast and SIP paging
...
- Paging over SIP calls means that the PBX sends a single SIP call to each device of user who is present in the Paging group
The paging methor method is selected automatically by the system, no special configuration is required - the PBX administrator must only create a Paging group, as described in Chatper Chapter Paging - Admin Guide - English. Paging over RTP is preferred (if possible based on network configuration and available devices), if it is not available, paging is sent via SIP calls.
Requirements and supported devices
RTP multicast
...
- works Works only as long as the PBX and the devices are in the same network
- is Is supported by the following Wildix devices: W-PA, WP
Paging over SIP calls
...
...
Limitation on the number of paging calls:
- New PBXs can receive 15 SIP paging calls + RTP multicast
Pre 2010 PBXs can receive 6 SIP paging calls + RTP multicast
Note | ||
---|---|---|
Note: For Cloud / Virtual PBXs: limitation Limitation on the number of calls is based on CPU capabilities, if CPU MHz value is higher than 700, then 15 SIP calls are allowed. You can check CPU information via SSH using the command:
|
...
Note |
---|
Hint: There is a way to increase SIP paging limits of Cloud PBXs by turning it to RTP multicast stream. For this purpose, you need to configure WMS Network between your Cloud PBX and local Hardware PBX:
Paging is now generated locally as RTP multicast and there are no limits to broadcast announcements! |
Devices are called in the following priority (if there are 2 registered devices with the same priority, only 1 device will receive a call):
- WP
- W-AIR
- Web (Chrome)
- Others
Note |
---|
Note:
|
Paging group
To start using Paging, first of all you need to create a Paging group:
...