| Html |
|---|
<div id="fb-root"></div>
<script>(function(d, s, id) {
var js, fjs = d.getElementsByTagName(s)[0];
if (d.getElementById(id)) return;
js = d.createElement(s); js.id = id;
js.src = 'https://connect.facebook.net/en_US/sdk.js#xfbml=1&version=v2.11';
fjs.parentNode.insertBefore(js, fjs);
}(document, 'script', 'facebook-jssdk'));</script> |
...
W-PA SIP Public Announcer is used to broadcast emergency messages and communication in large environments such as shopping malls, supermarkets, airports, hospitals. The device has 10 Watt audio output and it still allows you to connect external loudspeakers, and an external microphone. It can also act as a relay for activating door release switches or door locks via 1 embedded short-in detect port and 1 short-out control port (See Appendix 1 for more information).
...
- WMP provisioning: (the simplest mode) can be applied also for Cloud PBX and for connecting remote devices (assign devices to the PBX from the Portal)
- Auto-provisining: for local devices (cannot be used for Cloud PBX and for remote devices behind NAT / Firewall)
- Remote provisioning: this mode can be used for Cloud PBXs and for connecting remote devices behind NAT / Firewall
Read Refer to the chapters WMP Provisioning and Auto-provisioning of the guide: Provisioning of Wildix devices
Below remote provisining mode is described, as it is the most difficult mode.
Remote provisioning
The first step is set up on WMS side:
- Go to WMS -> Devices
- Click Add
- Enter MAC address of the device (you can find it on the device label)
- Click Next. You will be forwarded to the provisioning window with the device information (MAC, Type and Provisioning URL)
- Click Finish
The second step is set op on W-PA web inteface:
- Access W-PA web interface for configuration settings:
...
IP address will be playbacked through the speaker
| Warning |
|---|
Important: to be able to get W-PA IP address, you have to connect external speakers via Speaker interfaces/ a microphone via Microphone interface. |
...
After you log in W-PA web interface:
Go to System -> Auto Provision -> Static Provisioning Server and fill in the following information:
- Server Address: enter your PBX host address or public IP
- Configuration File Name: ?action=setaps
- Protocol Type: HTTPS
- Click Apply
- Go to System -> Tools -> Reboot phone
- Click Reboot key
- Confirm the reboot by clicking OK
You will hear two audio signals: the first one is played at the beginning of the reboot, the second one is played after it is completed.
...
for WMP and auto-provisioning details.
Refer to the chapter W-PA provisioning of the guide Remote provisioning of Wildix devices for remote provisioning details.
Assign to user
To assign a user to your W-PA SIP Public Announcer:
...